Clearing Paper Jams From Tray 2 - Xerox Phaser 3330 User Manual

Clearing Paper Jams from Tray 2

Note
To resolve the error displayed on the control panel you must removing any remaining
paper from the paper path.
1. Open Tray 2, and slide it completely out and away from the printer.
2. Remove any crumpled paper from the tray and any remaining paper jammed in the
printer.
• If the paper does not move when you pull it or if you do not see the paper in this
area, stop and go to the
• If the paper is removed, go to
3. Perform the following steps to locate the jam.
® ®
Xerox Phaser 3330 Printer
User Guide
Step 3.
Step 4.
Troubleshooting
7-11