Compliance Statement; Fcc Compliance Statement; Declaration Of Conformity - Barco KVD5521 User Manual

14 Compliance statement

14.1 FCC Compliance statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accord-
ance with the instruction manual, may cause harmful interference to radio communications. However there is no
guarantee that interferences will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception (which can be determined by
turning the equipment on and off), the user is encouraged to try to correct the interference by using one or more
of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not
expressly approved by the party responsible
for compliance could void the user's (or
your) authority to operate the equipment.
Only peripherals (digital input/output
devices, terminals, printers, etc.) certified to
comply with the Class B limits may be
attached to this display. Operation with non-
certified peripherals is likely to result in
interference to radio and TV reception. Only
shielded signal cables may be used with this
System.
The regulations are applied only to the
products with the ID LABEL indicating specific
requirements.

14.1.1 Declaration of Conformity

Trade name: KVD5521, IVD5521, HVD5521
Responsible Party: Barco, Inc
3059 Premiere Parkway
Suite 400
30097 Duluth, Georgia, USA
Barco - KVD5521, IVD5521, HVD5521 - R591341 - User Manual - Revision 05 - November 2016
14. Compliance statement
Attention: Des changements ou modifica-
tions non expressément approuvés par la
partie responsable de la conformité pour-
raient annuler l'autorité de l'utilisateur ou
la votre pour utiliser l'équipement. Seuls
les périphériques (entrée numérique / pé-
riphériques de sortie, terminaux, impri-
mantes, etc) certifiés comme étant con-
formes aux limites de la classe B peuvent
être connectés à cet écran. L'utilisation de
périphériques non conformes peut provo-
quer des interférences dans la réception
radio et télévision. Seuls des câbles blindés
peuvent être utilisés avec ce système
Les règlements sont appliqués que pour les
produits avec l'étiquette d'identification
indiquant les besoins spécifiques
_______________________________________________________
83