CareFusion LE200 LC Original Instruction page 60

Option Description
OP48 Program step countdown
OP52 Output interval for printer protocol
OP53 Language settings for printer protocol
Comment / Display
OFF = The time display counts up each program step
ON = The time display counts down each program step
By entering a value between 0 and 100, the output interval is set in
seconds for a printer directly connected to the treadmill. Standard: 60
(= printout of all values once per minute). The value 0 disables printing
of individual values, but not printing of headers and end results (UKK).
Select the language for printouts on a printer directly connected to
the treadmill. One of six languages can be chosen. Both, the protocol
printout and the test result and training recommendation of the UKK 2
km walking test are printed in the selected language.
EnGL = English (standard)
GErM = German
FrEn = French
For correct printout, the connected printer must be compatible with
PCL printer language. For special characters the ISO 8859-1 (Latin-1)
font is used.
SPAn = Spanish
POrt = Portuguese
HUnG = Hungarian
page 60
cos105000-2016-00 en