Connection Of External Devices / Interfaces - CareFusion LE200 LC Original Instruction

6.3 Connection of external devices / Interfaces

The back of the UserTerminal has RS232 interfaces.
For USB-RS232 converter, see "accessories".
The person combining a medical device with any other device for the first time is creating a Medical Electrical System.
Requirements for ME-Systems, see "creating systems".
Unused RS232 interfaces must be covered with dust caps [cos102973] for isolation purposes.
Description
RS232 / COM1
Possible connection of external
devices.
(standard)
RS232 / COM3
Possible connection for service
only
(optional)
Additional interfaces are located at the front of the device below the motor cover.
Description
Additional Stop 1
Possible connection for
emergency stop devices.
Additional Stop 2
Possible connection for
emergency stop devices.
RS232 / COM2
Possible connection of external
devices.
(optional)
RS232 / COM4
Possible connection of external
devices.
(optional)
Additional keyboard
Possible connection for remote
control
N/A
Ilustration
Ilustration
page 24
cos105000-2016-00 en