Adjustment Of Running Belt - CareFusion LE200 LC Original Instruction

Description
Start the running belt with 2 km/h and walk on the belt for 2 min.
Vary the position in order to distribute the lubricant.
Reset the OIL message (see OP01 in "User options").

11.4 Adjustment of running belt

Unmeant trapping hazards: Take off ties, scarfs or other clothes that may be trapped. Secure long hair and ribbons during
❚
maintenance and training in order to prevent being captured in trapping zones.
Do not touch the running belt while it is in motion.
❚
A second person has to be present during maintenance.
❚
Description
The maximum allowed lateral position of the running belt is
marked with this label.
Operate the device at 10 km/h.
Turn the LEFT trimming screw very slowly
(¼ rotation – observe – ¼ rotation – observe...).
Turn clockwise to adjust belt to the right.
Turn counter-clockwise to adjust belt to the left.
After adjustment, observe the running belt at 10 km/h for at
least 2 min.
Belt must maintain the position.
Remove Allen key from screw.
Illustration
Illustration
page 45
cos105000-2016-00 en