Manual Mode - CareFusion LE200 LC Original Instruction

8.3 Manual mode

Basic functions
Select "manual mode" with "+" or
"-" button
Selected mode flashes.
Confirm with "enter"
Running belt starts with predefined
starting speed (default = 0.5 km/h).
Confirm with "enter"
Running belt starts with predefined
starting speed (default = 0.5 km/h).
Adjust elevation with "up" or "down"
Current elevation is displayed in
"elevation" display
Terminate the operation with "stop"
Buttons / displays Further information
Device must be in "mode selection"
(one of the mode LEDs flashes)
To get there, cancel all other
activities by pressing the "stop"-
button.
To predefine starting speed, see
OP09 in "User Options".
To request body weight for
calculation of energy and power,
see OP16 in "User Options".
Pressing and holding the
key accelerates with defined
acceleration level (see "acc.
levels").
Decelerate to 0 km/h to pause the
operation (see "pause function").
To predefine stop time, see OP08 in
"User Options".
cos105000-2016-00 en
page 28