Troubleshooting; General Troubleshooting - CareFusion LE200 LC Original Instruction

12 Troubleshooting

12.1 General troubleshooting

In case of any visible or assumed defects or malfunctions (of the device, accessories, software, etc.), unplug device, exclude
❚
reconnection, mark clearly and inform h/p/cosmos service personnel via telephone and writing.
In case of any visible or assumed wear and tear (of the device, accessories, labels, etc.), unplug device, exclude reconnection,
❚
mark clearly and inform h/p/cosmos service personnel via telephone and writing.
Problem
Device cannot be switched on
Elevation does not work (E21)
Device does not start but displays speed value
Oil leakage
Device indicates "pull stop"
Electrostatic discharge
Bouncing noise
Grinding noises
Running belt outside of lateral limits
Problems with optional heart rate measurement
Any other problem
Solution
Release emergency off (see "emergency off")
Check power supply connection
Check device protection switch
Check power socket (test with another device)
Switch off
Wait 10 min (in order to cool down)
Switch on again
In case E21 still appears, unplug device, exclude reconnection, mark clearly
and inform h/p/cosmos service personnel via telephone and writing.
Switch off and on again
Check error messages (see below)
Unplug device
Remove excess oil besides running belt
Remove excess oil under running belt
Check the next days and repeat if necessary.
Release emergency stops (see "safety")
Choose proper floor, clothing and humidity
Device may not stand firmly
Contact service@h-p-cosmos.com
Check lubrication (see "lubrication")
Check adjustment of running belt (see "adjustment of running belt")
See "adjustment of running belt"
See "accessory: wireless heart rate measurement ..."
unplug device, exclude reconnection, mark clearly and inform h/p/cosmos
service personnel via telephone and writing.
page 47
cos105000-2016-00 en