Test Mode - CareFusion LE200 LC Original Instruction

8.6 Test mode

WARNING! Heart rate monitoring systems may be inaccurate.
❚
Incorrect or over exercising may result in serious injury or death.
❚
If you feel faint or dizzy stop exercising immediately and consult a medical doctor.
❚
Exclude overloading or overstressing of the patient.
❚
During stress tests a medical doctor has to be available at any time.
❚
The automatic modes must only be performed on the prescription of the medical doctor.
❚
Operator and patient have to be aware of automatic load changes during profile, cardio and test mode.
❚
In case of any visible or assumed defects or malfunctions (of the device, accessories, software, etc.), unplug device, exclude
❚
reconnection, mark clearly and inform h/p/cosmos service personnel via telephone and writing.
Start and load changes within the automatic modes are indicated by acoustic signals (beeps).
Furthermore, the displays show the next load parameters (flashing).
The h/p/cosmos treadmills are equipped with pre-defined tests.
As described before, the treadmill contains a number of standardized protocols.
❚
Nevertheless, the treadmill does not give recommendations for treatment.
The decision about the correct load is the duty of the medical doctor.
Depending on the application the load includes speed, elevation, distance, heart rate, body weight or motion support etc..
The annex covers a detailed explanation of all pre-defined tests (see "Annex II").
The annex also covers a detailed explanation how to create a self-defined test.
No. Description
01 UKK walk test
02 Graded test
03 Conconi test
04 Bruce protocol
05 Naughton protocol
06 Balke protocol
Basic functions
Select "test mode" with "+" or "-"
button.
Selected mode flashes.
Confirm with "enter".
No.
07
08
09
10
11
21 – 28
Buttons / displays
Description
Cooper protocol
Ellestad A protocol
Ellestad B protocol
Ramp profile
Gardner test protocol
Freely definable
Further information
Device must be in "mode selection"
(one of the mode LEDs flashes)
To get there, cancel all other
activities by pressing the "stop"-
button.
page 33
cos105000-2016-00 en