Uc Surface Control Software - PRESONUS Quantum series Owner's Manual

4

UC Surface Control Software

3.3 Controlling Quantum Mic Preamps with MIDI
4 UC Surface Control Software
UC Surface is a powerful control software for your Quantum-series interface. These
control functions are completely integrated inside Studio One. UC Surface allows
users of other popular DAW applications to access these functions. UC Surface
provides preamp level controls, phantom power, line-level input sensitivity switching,
main encoder assignments, and, for Quantum users, mute/dim and mono functions.
UC Surface is designed to verify that your Quantum-series interface
has the correct firmware version installed. You will be prompted if
your Quantum-series interface needs its firmware updated. Click
on the Update Firmware button to begin the update.
Warning: Do not power off or disconnect your Quantum-series interface
during the firmware update. Once the firmware update is successfully
completed, you will be alerted and instructed to disconnect your power supply and
Thunderbolt cable and reconnect it before rebooting your device. It is not sufficient
to simply power down your unit, you must disconnect the power source.
When the firmware update is complete, you must disconnect the physical
power source from your Quantum-series interface and reconnect
it. Powering it off it will not complete the update process.
Quantum-series
Owner's Manual
13