Advertisement
7.2 - SIP server mode (external)
In « SIP Server » Menu make sure that « Enable SIP server » is not Tick.
Enter then « SIP Parameters » menu and complete IPBX information to register the 2 GSM Modules :
Address : IPBX IP Address
•
Port : IPBX SIP Port
•
Name : IPBX extension SIP user name
•
Password : IPBX extension SIP user name password
•
Press then « Save changes » to save the parameters. The Link Gate SIP will inform you with a message « Failed
Saving » or « Successful Saving »
Linkcom France
11 rue du Soleil Levant 92140 CLAMART
Activate/desactivate internal SIP Server
SIP Server name
Prefix for calling throught module 1 and 2
Table of enabled phones. Set a
user name and password,
whitch is set on desired phone
Copyright © 2008 – Linkcom – Tous droit réservés
Name or IP adress of external
SIP Server for module 1
Name or IP adress of external
SIP Server for module 2
9
Advertisement
