Advertisement
In default mode, the Link Gate SIP is set in SIP server mode, to switch to P2P mode, open the unit and changes the
dipswitch position N°3 to ON.
Dipswitch description:
1 : IP default Configuration. (OFF = Default position)
2 : not used
3 : mode, SIP server / P2P (ON = P2P mode / OFF = SIP Server mode)
4 : not used
3. Putting into Service
3.1. Module Description
SIM cards position :
Before inserting the SIM card, check the status of PIN code in a mobile phone
without PIN). When you want to start with PIN you have firstly to program this PIN to Link
Gate SIP. Without this setting the Link Gate SIP will not log to GSM network!
"We advise not to use PIN Code
SIM card position
LAN cable
Back Panel Vue
Front Panel – LED description
Linkcom France
11 rue du Soleil Levant 92140 CLAMART
SIM holders will release after pressing
the yellow button
GSM
antennas
Power supply –
connect at end
(starting with PIN or
Copyright © 2008 – Linkcom – Tous droit réservés
4
Advertisement
