Advertisement
4.2 - Network settings: DHCP or IP SIP mode
In Network setting menu, It is possible to use DHCP automatic setup or enter manually IP addresses.
After making all changes click on a save and restart button. Restarting is mandatory for those steps
4.3 Manual configuration IP SIP mode:
If you prefer to enter manually the IP addresses, make sure to fill out all IP addresses, Network mask, Default
Gateway and then all DNS parameters.
4.4 Automatic configuration DHCP mode:
Tick the Blanc box Setup via DHCP and Enter for each IP address ID1 – ID2 the Host name
And the DHCP Client ID SIP Server name
Linkcom France
11 rue du Soleil Levant 92140 CLAMART
Enable/disable ethernet
settings via DHCP
Identification ID of module 1 for DHCP
Identification ID of module 1 for DHCP
Identification ID of internal SIP Server
for DHCP
Copyright © 2008 – Linkcom – Tous droit réservés
6
Advertisement
