Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Linkcom Link Gate A Premium
Summary of Contents for Linkcom Link Gate A Premium
- Page 1 Analog GSM Gateway Link Gate A Premium p.2 | 23...
-
Page 2: Basic Features
BASIC FEATURES: Link Gate A Premium is dual band GSM Gate based on Telit GL865 GSM module equipped by a lot of adjustable features increased comfort of service. It has been designed for GSM network 850/900/1800/1900 MHz. • Polarity reversal of telephone line allows exact detection of start and end of call. - Page 3 1.1.1 1.1.2 1.1.3 antenna 1.1.4 1.1.5 1.1.6 1.1.7 1.1.8 1.1.9 1.1.10 Analog line 1.1.11 1.1.12 1.1.13 USB option Power supply Phone line Mini USB p.4 | 23...
-
Page 4: Connection Of Antenna
GSM signal strength (via LED table).When pick up connected analogue phone or call to Link Gate A Premium from PBX the LED of analogue line lights up (green LED). In the phone is hearing dial tone of Link Gate A Premium. It is ready to use. - Page 5 Notes to each parameters: 11 – 19 When you program some prefixes the Link Gate A Premium allows outgoing calls starts by those prefixes only. The others will get busy tone. When memories will be empty the calling won’t be restricted (default). Memory of prefixes can content 1 digit only.
- Page 6 “00” to send it to mobile phone. 31 This feature identificated connection of Link Gate A Premium to external line at some type of PBX (ex : Siemens Hicom). 29 This feature is used for searching of antenna best position. After feature activation you get tones immediately.
- Page 7 Table of programming Dial Number Default Password nnnn to programming mode access Memory x for permitted fix number(1 to 4 digits) Reversal polarity n=0 OFF n=1 ON Acknowledge character setting n=0 # n=1 * Type of dial tone n n=0 permanent tone n=1 dial tone up table of tone n=2 dial tone of public lines operator n=3 quiet...
- Page 8 Default setting Table of tones Dial tone (up setting) Link Gate A Premium is ready to accept dial Busy tone – short tone repeated Called part is busy, doesn’t exist, not permitted,etc... Ringing tone- long tone and pause repeated...
-
Page 9: Led Signaling
LED signaling Permanent light (lights after sec. After power connection) Power supply of unit Permanent light Line OFF HOOK Doesn’t light Line ON HOOK Flashing in rythm of busy tone Programming or PC connection mode Flashing in rhytm of busy tone. Initialization mode after power supply connection, restart after programming etc.. -
Page 10: Technical Parameters
Technical parameters: Type Link Gate A Premium Operating position various Operating conditions temperature: +5° C ÷ +40° C, Humidity: 10% ÷ 80% at 30° C Dimensions (mm) 140*97*37 Weight 215g Part of power supply Supply voltage 8-12V (AC/DC) (adapter) Protection thermal fuse in adapter ČSN EN 60950 group 2...