Table of Contents
Advertisement
When the oven is first installed
When the oven is first connected to the electrical
supply, or when supply is restored after a long
power failure, the upper section of the display
shows this message:
"WELCOME TO * KRONOS -3 * PYRO * DANSK
* DEUTSCH * ENGLISH * ESPANOL *
FRANCAIS * ÅËËÇÍÉÊÁ * ITALIANO *
NEDERLANDS * NORSK * PORTUGUES *
SVENSKA * РУССКИЙ"
This message lists all the languages which can be
chosen to operate with the Oven Electronic Control
(Fig. 1).
Symbol flashing near the "Clock Symbol"
means that you need to set the current time of day
before using the oven.
To set the correct time of day:
1. Touch the "Time Function Control"
symbol
flashes near the "Clock Symbol"
, set the current time of day touching
controls " " or " " (Fig. 2). Once you have
set the time, the symbol keeps flashing for
5 seconds and then comes off. This means that
the setting has been stored in the Electronic
Control memory.
2. If symbol
stops flashing before you have
had time to set the clock, touch the "Time
Function Control"
starts flashing again.
Then, proceed as described at point 1.
. While
twice. The symbol
electrolux 7
Fig. 1
Fig. 2
7
Advertisement
Table of Contents
