Programming The Oven - Zanussi ZYB 992 User Manual

Programming the oven

How to set the minute minder
1. Touch the "Time Function" control
symbol flashes near the "Minute Minder"
symbol and the time display shows "0.00"
(Fig. 10).
2. Symbol will flash for 5 seconds. Within this
time, touch control " " to select the required
time (Fig. 11). Maximum time is 23 hours 59
minutes. After another 5 seconds after you
have set the time, the symbol stops flashing.
This means that the setting has been stored in
the Electronic Control memory and that the
countdown started.
3. When the programmed time has elapsed, you
hear an acoustic alarm while symbol
flashes and the time display shows "0.00".
4. To switch off the acoustic alarm, touch any
control.
The oven will NOT switch off if in use.
The Minute Minder function can also
be used when the oven is off.
To change the Minute Minder setting
Touch the "Time Function" control
flashes near the "Minute Minder" symbol
It is now possible to change the Minute Minder
setting by touching control " " or " " (Fig.11).
To cancel the Minute Minder:
Touch time function control
flashes near the "Minute Minder" symbol
touch control " " until the time display shows
"0.00".
. The
: the symbol
.
: the symbol
. Then
electrolux 13
Fig. 10
Fig. 11
13