Zanussi ZYB 992 User Manual page 31

Hide thumbs Also See for ZYB 992:
Table of Contents

Advertisement

How to use the pyrolytic cleaning
function
Before activating the pyrolytic cleaning
function, remove any excessive spillage
and make sure that the oven is empty. Do
not leave anything inside it (e.g. pans,
grids, baking tray, dripping pan, etc.) as
this could heavily damage them.
Ensure that the oven door is closed before
activating the pyrolytic cleaning function.
During the pyrolytic cleaning cycle the
oven door becomes hot. Children should
be kept away until it has cooled.
When the pyrolytic cleaning function is on,
it is advisable not to use the hob as this
could cause overheating and damage the
appliance.
Choose this function to clean the oven by pyrolysis.
The following pyro levels are available:
Pyrolytic 1 (PYRO 1) time : 2 h = 30 min heat-up
+1 h at 480°C + 30 min cooling down.
Pyrolytic 2 (PYRO 2) time : 2 h 30 min. = 30 min
heat-up +1 h 30 min at 480°C + 30 min cooling
down.
The pyro duration time cannot be changed.
To activate the pyrolytic cleaning function proceed
as follows:
1. Touch control
2. Touch control
the "Pyro" function symbol
level 1) will appear on the display (Fig. 24).
The indication "REMOVE SHELF
SUPPORTS" will appear on the display.
Remove the shelf supports (not present
in this appliance) and all oven accessories
before activating the pyrolytic cleaning
cycle.
to switch on the oven.
as often as necessary, until
(PYRO 1-
electrolux 31
Fig. 24
31

Advertisement

Table of Contents
loading

Table of Contents