Table of Contents
Advertisement
To programme the pyrolytic cleaning
cycle (delayed start, automatic stop)
If you desire, you can programme the starting and
ending time of the pyrolytic cleaning cycle.
1. Touch control
2. Touch control
the "Pyro" function symbol
level 1) appears flashing in the display.
The indication "REMOVE SHELF
SUPPORTS" will appear in the display.
Remove the shelf supports (not present
in this appliance) and all oven accessories
before activating the pyrolytic cleaning
cycle.
3. While symbol
or ' ' to select the pyrolytic 1 (PYRO 1) or
pyrolytic 2 (PYRO 2) function.
4. Once you have chosen the desired pyrolytic
function, "the "Pyro" writing will flash in the
display waiting for confirmation to start the
pyrolytic cleaning function.
At this time, touch the time function control
until The "End of Cooking" symbol
and the arrow symbol
(Fig. 28). The control panel will display the
end of the cleaning cycle (that is, the actual
time + cooking duration time).
5. Touch controls ' ' or ' ' to select the required
end of cycle time. Then, the "Pyro" writing
starts flashing, the oven lamp switches off and
the pyrolytic cleaning cycle will start at the set
time.
6. After some time, the door lock will be activated
and the related symbol
to switch on the oven.
as often as necessary, until
(PYRO 1-
flashes, touch controls ' '
will flash
will be displayed.
At the end of the pyrolytic cleaning process, the
display shows the time of day. The oven door is
locked.
Once the oven has cooled down, an acoustic signal
will be emitted and the door will unlock.
To stop the pyrolytic cleaning cycle at any time,
touch control
.
electrolux 33
Fig. 28
33
Advertisement
Table of Contents
