Projector Controls And Indicators - Compaq MP1400 Service Manual

SERVICE MANUAL

2-1 Projector Controls and Indicators

Standby button
ON/OFF Switch
The projector shall have a AC mains power control switch visible and accessible on the
end of the projector, near the video and AC inlets.
Indicator LED
There shall be an LED located in the Standby button which lights green when the projector
is powered on with a stable and usable display. The color shall change from
yellow to indicate it is in the suspend or standby modes.
Projector Input Signal Selection
There is no input signal select switch on the projector itself. It is achieved either via the
projector OSD, pushing the
Source button on the remote control.
Martin 2-2
OSD Select button
OSD - and + buttons
Source button on the multimedia adapter or by pressing the
Auto-image
button
green to