Disassemble Fan, Ballast And Elevator Module - Compaq MP1400 Service Manual

SERVICE MANUAL

4-7 Disassemble Fan, Ballast and Elevator Module

Fan Module
Elevator Module
1. Unscrew one screw, unplug one cable connected to Ballast Module and tear off
Tape to separate Fan Module from Left Housing.
2. Unscrew one hex screw and six screws of Ballast & Elevator to separate it from
Left Housing.
3. Unscrew two screws on Ballast Module to remove it.
Martin 4-8
1
Tape
2
3
Left Housing
2
Ballast Module