Setting Up The Projector - Compaq MP1800 User Manual

Setting Up the Projector

Follow the instructions below and on the following pages to set up
the projector. Separate setup instructions are described for the
following products:
Portable and desktop computers
!"
Handheld computers with VGA capability
!"
videocassette recorder, DVD, or camcorder (requires optional
!"
Multimedia Video Adapter)
✎
The projector is hot pluggable and can be
connected to any video input source while
the source is in use.
IMPORTANT: Place the projector on a stable desk or table at a
distance
not less than 4.92 feet (1.5 meters) and not greater than 16.4 feet
(5 meters) from the projection screen.
WARNING:
!
shock or damage to your equipment:
!"
Do not disable the power cord
grounding plug. The grounding plug
is an important safety feature.
!"
Plug the power cord into a grounded
(earthed) electrical outlet that is
easily accessible at all times.
!"
Disconnect power from the projector
by unplugging the power cord from
the electrical outlet.
!"
Do not place anything on power
cords or cables. Arrange them so that
no one may accidentally step on or
trip over them. Do not pull on a cord
or cable. When unplugging from the
electrical outlet, grasp the cord by
the plug.
1-4
To reduce the risk of electric
Getting Started