Setting Advanced Options - IBM ThinkPad 310E User Manual

Setting Advanced Options

Note:
PCM automatically detects the
Socket Controller installed in your
computer. For each controller that
PCM supports, there is a
corresponding default IRQ.
4
Type in the complete path to the directory that contains the
Flash File System drivers for your Flash card.
5
When you have entered the Flash File System path, click on
Done, or click on Cancel to exit without saving the FFS path
designation.
When a path designation error occurs, an error message "Invalid
path entered. Please try again, or press CANCEL." appears.
Please set the correct path.
The Advanced menu contains options that are intended for
experienced and advanced computer users. The default settings
should suffice for most systems and users. However, there may be
occasions when you must change these settings to resolve conflicts.
To activate the Advanced dialog box, use your mouse to click on
Advanced, or press Alt-A.
The Advanced dialog box allows you to specify values for the
following resources:
IRQ
You have the option of specifying an IRQ, with a value ranging from
0 to 15. Be sure that you do not assign two devices to the same
IRQ, or an error will result.
Refer to your computer's documentation to determine the IRQ you
should specify for your computer.
CIS Address
This option allows you to store a PC Card's CIS, which stands for
Card Information Structure, at a specific location in memory.
The default CIS address should suffice for most PC cards.
However, if the card you are using requires a specific address (see
your card manufacturer's accompanying documentation), then you
must enter the address in this field.
PCMSetup For Windows
Appendix B. Advanced Information for PC Cards
B-5