Entering The Bios Utility - IBM ThinkPad 310E User Manual

Entering the BIOS Utility

Note:
If the Setup password is set, you
need to enter the Setup password to
gain access to the BIOS Utility.
Press F2 while the ThinkPad logo is being displayed after power-on
to enter the BIOS Utility. When the power-on password is set, press
F2 within three seconds after you input your password and hit the
Enter key to enter the BIOS Utility. The main screen displays.
↑↓=Move highlight bar, ↵=Select, Esc=Exit
There are four main menu items:
•
Basic System Settings
•
System Security
•
Power Management Settings
•
Load Setup Default Settings
Entering the BIOS Utility
BIOS Utility
Basic System Settings
System Security
Power Management Settings
Load Setup Default Settings
Appendix C. BIOS Utility
C-3