IBM ThinkPad 310E User Manual page 179

Power Management Settings
Note:
Auto-insert notification needs to be
disabled for the computer to enter
standby or hibernation mode. To
check, click on Start, Settings, then
Control Panel. Double-click on
System and click on the Device
Manager tab. Double-click on
CDROM, then double-click on the
CD-ROM device. Click on the
Settings tab and make sure the auto
insert notification item is not
checked. Click on OK to accept.
Note:
When the computer is in hibernation
mode, it cannot resume when this
parameter is enabled.
Note:
When the computer is in hibernation
mode, it cannot resume from a
modem ring.
C-14
IBM ThinkPad 310E/310ED: User's Guide
System Standby Timer
This parameter enables you to set a timeout period for the computer
to enter standby mode. The valid values for this timer range from 1
to 60 minutes with default set at Off.
System Hibernation Timer
This parameter enables you to set a timeout period for the computer
to enter hibernation mode. The valid values for this timer range
from 1 to 90 minutes with default set at Off.
System Resume Timer Mode
When enabled, the computer resumes from standby mode at the
specified Resume Date and Resume Time parameter settings.
System Resume Date
System Resume Time
The System Resume Date and System Resume Time parameters
let you set the date and time for the resume operation. The date
field format is MM/DD/YYYY. The time field takes the same format
as the System Time parameter in the Basic System Settings screen.
Setting a resume date and time that is not valid automatically
disables these fields. A successful resume occurring from a date
and time match automatically disables these fields.
Modem Ring Resume On Indicator
When enabled, the computer wakes up from standby mode and
returns to normal mode when a PCMCIA modem detects a ringing
tone. The default setting is Enabled.