Using Notebook Manager; Starting Notebook Manager - IBM ThinkPad 310E User Manual

Using Notebook Manager

Note:
Certain Fn key functions are disabled
when you access the notebook
manager, because these functions
are also found in the notebook
manager.

Starting Notebook Manager

Note:
Making changes to most settings in
the Notebook Manager take effect the
next time the computer restarts. If
you make changes in the Hotkey
Icon, Power Saving and Display
screens, these changes take effect
immediately.
The computer has a built-in system setup program called Notebook
Manager. The Windows 95-based Notebook Manager allows you to
set passwords, the startup sequence of the drives and power
management settings. It also shows current hardware
configurations.
To start the Notebook Manager:
1
Click on the Start button.
2
Select the Programs folder.
3
Select the Notebook Manager folder.
4
Select the Notebook Manager application to run the program.
Notebook Manager consists of eight sections:
•
Information Viewer
•
POST
•
Boot Device
•
Password
•
Hotkey Icon
•
Power Saving
•
Display
•
IDE Adapter
To select a section, click on the tab of the section you want to view.

Using Notebook Manager

Chapter 3. Operating Your Computer
3-3