Table of Contents
Advertisement
BES M/Q...-D12 Inductive Safety Sensors
7.2
Response times
Type
Response time to a safety request
(removing from the release zone)
Response time when approaching the close zone
(non-safety relevant done)
Response time when approaching the release zone
(release time)
Risk time / error response time for safety-relevant errors
Permissible dwell time in close area
Delay time for activating the setup aid
(see Section 6.1 Calibration aid on page 24).
Dwell time in undamped state (≥ 30 mm) for return to operating
mode (see Section 6.3 Disabling the calibration aid on
page 26).
Simultaneity of switching on and off of the outputs in case
of a safety request
Test pulse duration t i_max on A1A2
32
Response
time
≤ 50 ms
≤ 100 ms
typ. 100 ms
≤ 200 ms
≤ 100 ms
approx. 2 s
approx. 5 s
approx. 2 s
≤ 50 ms
max. 1 ms
Advertisement
Table of Contents
