Balluff BES M30EP-PFC12F-S04G-D12 User Manual page 31

BES M/Q...-D12 Inductive Safety Sensors
Non-delayed switching of the Signal LED
BES057A:
Undamping < 2 s:
0
*)
≈ 0 s
Signal
Power
BES057C:
Undamping < 2 s:
0
*)
≈ 0 s
Signal
Power
BES0577:
Undamping < 2 s:
0
*)
≈ 0 s
Signal
Power
Close zone
1
Release zone
2
*) except for initial startup
Figure 12 Non-delayed switching
www.balluff.com
If the damping element was removed from
the sensor for less than 2 sec. (> 30 mm),
the yellow Signal LED comes on with no
delay when damping in the release zone.
30 mm
If the damping element was removed from
the sensor for less than 2 sec. (> 45 mm),
the yellow Signal LED comes on with no
delay when damping in the release zone.
45
mm
If the damping element was removed from
the sensor for less than 2 sec. (> 30 mm),
the yellow Signal LED comes on with no
delay when damping in the release zone.
30
mm
31