BES M/Q...-D12 Inductive Safety Sensors
Installation conditions for BES057A:
The device cannot be installed flush in steel per IEC 60947-5-2,
Type I2C40SP2.
In addition the device may be installed flush on steel on one side.
In copper, aluminum and brass the device can be flush mounted per
IEC 60947-5-2, Type I1C40SP2.
►
Secure the device against coming loose.
►
Tighten screws to 1 Nm.
►
Limit use of slot holes to initial setting.
►
Note installation conditions per figures 1 to 5:
1
2
Angle
4
Figure 4 Minimum distances from metal surfaces for BES057A
18
3
Channel
5
80
105
80