Table of Contents
Advertisement
Connect Tech - Xtreme/Multi-I/O - Users Guide
Serial Port Configuration Method
When the Xtreme/Multi-I/O is installed into a computer and Serial Port 8 is enabled, a terminal program can be
used to access the settings of the board much like the Virtual Serial Port method using the OS running on the
PC/104 stack. Use a terminal program like qtalk, minicom, realterm, etc to configure the port settings
interactively.
This method is also applicable to situations where the application needs to change certain settings dynamically
as part of the application's operation. However, the primary PC/104 Bus settings (like IO/Memory addresses or
interrupts) would not be candidates for any dynamic operations.
NOTE: Because this method requires some settings to already be enabled, we do not recommend this as a
primary way to configure the board, but rather suggest using the USB port.
Each command is processed upon pressing "ENTER" key (CR character) and feedback is given in an "OK" or
"ERROR" with details format.
Document: CTIM-00116
Revision: 0.02
Page 13 of 50
Connect Tech Inc. Proprietary Information
0.02
Date: Apr. 14, 2015
Advertisement
Table of Contents
Need help?
Do you have a question about the Multi-I/O and is the answer not in the manual?
Questions and answers