Phasor Measurement Unit - GE t60 Instruction Manual

6 ACTUAL VALUES
The T60 Transformer Protection System is provided with optional IEC 61850 communications capability.
This feature is specified as a software option at the time of ordering. Refer to the Ordering section of chap-
ter 2 for additional details.
The IEC 61850 GGIO3 analog input data points are displayed in this menu. The GGIO3 analog data values are received
via IEC 61850 GOOSE messages sent from other devices.

PATH: ACTUAL VALUES METERING
 PMU 1

MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
The above actual values are displayed without the corresponding time stamp as they become available per the recording
rate setting. Also, the recording post-filtering setting is applied to these values.
GE Multilin


PHASOR MEASUREMENT UNIT

PMU 1 VA:
0.0000 kV, 0.00°
PMU 1 VB:
0.0000 kV, 0.00°
PMU 1 VC:
0.0000 kV, 0.00°
PMU 1 VX:
0.0000 kV, 0.00°
PMU 1 V1:
0.0000 kV, 0.00°
PMU 1 V2:
0.0000 kV, 0.00°
PMU 1 V0:
0.0000 kV, 0.00°
PMU 1 IA:
0.0000 kA, 0.00°
PMU 1 IB:
0.0000 kA, 0.00°
PMU 1 IC:
0.0000 kA, 0.00°
PMU 1 IG:
0.0000 kA, 0.00°
PMU 1 I1:
0.0000 kA, 0.00°
PMU 1 I2:
0.0000 kA, 0.00°
PMU 1 I0:
0.0000 kA, 0.00°
PMU 1 FREQUENCY:
0.0000 Hz
PMU 1 df/dt:
0.0000 Hz/s
PMU 1 CONFIG CHANGE
COUNTER: 0
T60 Transformer Protection System
6.3.8 PHASOR MEASUREMENT UNIT

PMU 1(4)
Range: Va or Vab per VT bank connection
Range: Va or Vab per VT bank connection
Range: Va or Vab per VT bank connection
Range: Substituted with zero if delta-connected VTs.
Range: 0 to 65535
6.3 METERING
6
6-23