Star SM-L304 Series User Manual page 37

 Press MODE button to switch the menu item, then press the FEED button once to enter the menu.
→ Press the FEED button once to get into the Density menu.
Density:
Display:
0-Medium
1-Low
2-High
3-Special
→ Press the MODE button once to input the number 1, then press and hold FEED button to
confirm the new setting and return to the previous menu.
(The density has set to Low)
0(Medium) → 1(Low)
 Press the MODE button once to switch the menu item--Standby Time.
→ Press the FEED button once to get into the menu.
Standby Time:
Display:
[0010-9999(Sec)]
→ Press the FEED button twice to move cursor("-"), then press the MODE button twice to input the
number: 8, finally press and hold FEED button to confirm the new setting and return to the
previous menu.
(The standby time has set to 80 seconds)
0060(Sec) →0080(Sec)
When set the parameter to 0000, the standby time becomes invalid.
If set the parameter to 0001~ 0009, a buzzer beeps, so do not set it.
 Press the MODE button twice to switch the menu item--Auto Off Time.
→ Press the FEED button once to get into the menu.
Auto Off Time:
Display:
[0000-9999(Min)]
→ Press the MODE button once to input the number on : 1, then press and hold FEED button to
confirm the new setting and return to previous menu.
(The auto off time has set to 1000 minutes)
0000(Min) →1000(Min)
When set the parameter to 0000, the auto off time becomes invalid.
0
0060
0000