Star SM-L304 Series User Manual page 30

Status
MSR Injecting key
Hex Dump Mode
Self Test Printing
at the button operation
Writing Firmware
Notes:
a) Bluetooth Status icon, Battery status icon and Roll paper Status Icon are always displayed
on LCD when Blacklight is ON.
b) Buzzer sound frequency or pattern
A : 530Hz/192msec
B : 670Hz/192msec
C : 800Hz/192msec
D : 800Hz/96msec

Bluetooth Status Icon:
Icon
No Bluetooth connection
Bluetooth connection

Battery Status Icon:
Table1-3
Action
Power
(Green)
Online ON
Succeeded key injection
Failed key injection
ON
While printing ON
After printing
Enter Writing Mode ON
While Writing
Finish Writing
E : 667Hz/96msec
F : 537Hz/96msec
G : 800Hz/96msec
Bluetooth Status
Lamp
LCD
Error
LCD back Light, [Discription]
(Red)
OFF Backlight ON
[Please Inject Key...]
Backlight ON
[Key Injection:Success]
Backlight ON
[Key Injection:Error]
OFF Backlight ON
[Hex Dump Mode]
OFF Backlight ON
[Printing...]
Backlight ON
maintain the original state
OFF Backlight OFF
Backlight OFF
Backlight OFF
(Power is also OFF)
Buzzer
Nothing
Beep
(G)
Beep
(G-G)
Nothing
Nothing
Nothing
Nothing
Nothing
Nothing