Example
When you want to change the settings of the printer mode as shown below,
Item
1 Density
2 Standby Time
3 Auto Off Time
4 Smart Power
5 Paper Type
6 Factory Reset
7 Password
Press and hold the MODE & FEED buttons for 5 seconds.
→ You will see present "Enter Menu Mode" in the LCD.
Press the MODE button once to switch the menu item.
Display: 1 Self Test →2 System Setting
Press the FEED button once to get into the System Setting menu.
→ You will see present "Input Password 0000" in the LCD.
→ Press FEED button to move cursor("_"), press MODE button to switch the number (0~9).
Password: 0000(default)
→ Press and hold the FEED button for 2 seconds to get into the menu.
Display: 1 Density
2 Standby Time
3 Auto Off Time
4 Smart Power
5 Paper Type
6 Factory Reset
7 Password
8 Previous Menu
Factory Setting
0(Medium)
1(Low)
0060(Sec)
0080(Sec)
0(Invalid)
1000(Min)
0(Disable)
0(Disable)
0(Receipt)
2(BM(2inch))
0(N)
0(N)
0000
2222
Configuration Example