Kd425 - Kohler KD 425-2 Workshop Manual

Any modifications to this document must be registered by the drafting body, by completing the following table.
Drafting Document
body code
Tech-Pubs ED0053031750
Manual's purpose
• This manual contains the instructions needed to carry out a proper maintenance of the engine, therefore it must always be
available, for future reference when required.
• Safety pictograms can be found on the engine and it is the operator's responsibility to keep them in a perfectly visible place and
replace them when they are no longer legible.
• Information, description and pictures in this manual reflect the state of the art at the time of the marketing ofengine.
• However, development on the engines is continuous.Therefore, the information within this manual is subject to change without
notice and without obligation.
• KOHLER co. reserves the right to make, at any time, changes in the engines for technical or commercial reasons.
• These changes do not require KOHLER co. to intervene on the marketed production up to that time and not to consider this
manual as inappropriate.
• Any additional section that KOHLER co. will deem necessary to supply some time after the main text shall be kept together
with the manual and considered as an integral part of it.
• The information contained within this manual is the sole property of KOHLER co. As such, no reproduction or replication in
whole or part is allowed without the express written permission of KOHLER co..
- 2 -
REGISTRATION OF MODIFICATIONS TO THE DOCUMENT
Model
Edition
N°
51500 1°
Original instructions translated from the Italian language
Data reported in this issue can be modified at any time by Kohler.
Revision Issue date
0
24/02/2017
KD425-2 Workshop Manual_cod. ED0053031750_1° ed_ rev. 00
Review
Endorsed
date
24/02/2017