Explanation Of The Safety Pictograms That Can Be Found On The Engine Or In The Workshop Manual; Indications Regarding The Points On The Engine Where The Safety Pictograms Are Placed - Kohler KD 425-2 Workshop Manual

1 General remarks and safety information

Explanation of the safety pictograms that can be found on the engine or in the Workshop manual

- Read the Operation and Workshop manual before
performing any operation on the engine
- High temperature components
- Danger of scalding
- Presence of rotating parts
- Danger of entangling and cutting
- Presence of explosive fuel
- Danger of fire or explosion
- Presence of steam and pressurized coolant
- Danger of scalding

Indications regarding the points on the engine where the safety pictograms are placed

- Ensure the good condition of safety signs.
- If the safety signs are damaged and / or illegible, you must replace them with other originals and place them in the positions
shown below.
- For cleaning use a cloth, water and soap.
- 12 -
- Use protective gloves before carrying out the
operation
- Use protective glasses before carrying out the
operation
- Use sound absorbing protections before carrying out
the operation
- Electric shock
- Danger of severe scalding or death
- Fluids under high pressure
- Danger of fluids penetration
- Lethal exhaust gas
- Danger of poisoning or death
KD425-2 Workshop Manual_cod. ED0053031750_1° ed_ rev. 00