Table of Contents
Advertisement
Specifications
Power supply:
AC 100 V to 40 V, 50/60 Hz
Power consumption:
Approx. 40 W
GENERAL
Operating temperature:
Storage temperature:
Allowable humidity ranges:
Weight:
Dimensions (W D H):
Finish:
Controller supported:
INPUT
Input connector:
OUTPUT
Output connector:
INPUT/OUTPUT
Input/Output connector:
FUNCTIONS AND PERFORMANCE
[Camera unit]
Imaging sensors:
Lens:
Focus:
Color separation optical system: Prism system
Gain selection:
Electronic shutter speed:
Gamma:
3 °F to 104 °F (0 °C to +40 °C)
–4 °F to 1 °F (–0 °C to +50 °C)
Less than 85 % (no condensation)
Approx. 16.5 lbs. (7.5 kg)
9-3/8˝ 10-1/8˝ 13-1/˝ (38 57 343.5 mm) [excluding protrusions]
Light silver matte finish
AW-RP655, AW-RP555, AW-RP400, AW-IF400, AW-CB400
It may be necessary to upgrade the version of the controller so that the controller will
support the unit.
AC 100 V to 40 V (50/60 Hz),
G/L IN (BNC)
BBS or VBS signal supported
Composite: 1.0 Vp-p/75 (BNC 1),
HD/SD analog component or SD Y/C signals (VGA 15P 1)
Y/C signals available in SD mode only; switching with Y/Pb/Pr signals possible
using menu setting
SD/HD selection possible when Y/Pb/Pr signals are output.
CONTROL IN RS4A (RJ-45)
1/3˝ CCD imaging sensors 3 (inter-line type, progressive system supported)
Motorized 13 zoom, f/1.6 to .8
(f=4. to 55 mm; 35 mm equivalent: 3.5 mm to 43 mm)
Switching between auto and manual
0 to 1 dB in step, 15 dB,
18 dB, AGC (iris always operated automatically at the AGC ON setting)
1/100, 1/50, 1/500, 1/1000, 1/000 sec.,
Synchro scan (60.04 to 48.8 Hz)
Low, Normal, High
40
indicates safety information.
Advertisement
Table of Contents
