Table of Contents
Advertisement
How to turn the power on and off
Turning the power off
When performing the operations using the
accessory wireless remote control
1
Press one of the [CAM1] to [CAM4]
buttons on the wireless remote control to
select the unit.
2
Press the [ON/STANDBY] button on the
wireless remote control for two seconds.
The unit's power is turned off.
The unit's status display lamp now lights up orange.
3
If a multiple number of units are going
to be used, repeat steps
required.
4
Set all the power switches of the units
and devices connected in the system to
OFF.
1
and
2
as
17
When performing the operations
using the controller
1
Set the [OPERATE] switch on the
controller to OFF.
The power of all the cameras (including the unit)
connected to the controller is turned off.
The unit's status display lamp now lights up orange.
2
Set all the power switches of the units
and devices connected in the system to
OFF.
For further details, refer to the Operating Instructions of the
controller.
Advertisement
Table of Contents
