Table of Contents
Advertisement
Safe modes
Concerning the safe modes
This unit comes with two safe modes which are designed to safeguard the user and others from injury and to prevent damage to
the unit.
When a safe mode is established, some or all of operations will no longer be accepted.
1
Collision-triggered safe mode
When the unit collides with a person or obstacle during panning or tilting, the "Collision-triggered safe mode" is established,
and all further panning or tilting in the direction of the collision is suspended.
To release the "Collision-triggered safe mode", return the panning or tilting to a neutral position.
2
Trouble-triggered safe mode
When trouble has occurred inside the unit, the "Trouble-triggered safe mode" is established, the unit's functions are shut
down, and the status display lamp lights up red.
To release the "Trouble-triggered safe mode", first place the unit in the standby mode, turn its power off and then turn it
back on. (If internal trouble is identified again, the "Trouble-triggered safe mode" will be established again.)
Note
The output of pictures might be suspended when the unit collides with a person or obstacle
and the safe mode is established.
In this case, the output of pictures will be restarted about 5 to 10 seconds later.
9
Advertisement
Table of Contents
