Samsung AC071MN4PKH Service Manual page 43

The procedure of setting option(Cont.)
7 Set the SEG9 and SEG10 values:
a Set the SEG9 value by pressing the
value you want to set appears on the remote control display.
b Set the SEG10 value by pressing the
value you want to set appears on the remote control display.
When you press the (Low Fan) or
following order:
8 Press the (Mode) button. Heat and On appear on the remote control display.
9 Set the SEG11 and SEG12 values:
a Set the SEG11 value by pressing the
the value you want to set appears on the remote control display.
b Set the SEG12 value by pressing the
the value you want to set appears on the remote control display.
When you press the (Low Fan) or
following order:
10 Press the (Mode) button. Auto and Off appear on the remote control display.
11 Set the SEG14 and SEG15 values:
a Set the SEG14 value by pressing the
the value you want to set appears on the remote control display.
b Set the SEG15 value by pressing the
value you want to set appears on the remote control display.
When you press the (Low Fan) or
the following order:
Steps
(Low Fan) button repeatedly until the
(High Fan) button repeatedly until the
(High Fan) button, values appear in the
(Low Fan) button repeatedly until
(High Fan) button repeatedly until
(High Fan) button, values appear in the
(Low Fan) button repeatedly until
(High Fan) button repeatedly until the
(High Fan) button, values appear in
4-3
Troubleshooting
Remote control display
SEG 9
SEG 10
SEG 11
SEG 12
SEG 14
SEG 15