Problems You Can Solve; Displayed Messages And Explanations; Problems And Possible Solutions - ASCOM 9P23 User Manual

Hide thumbs Also See for 9P23:
Table of Contents

Advertisement

Problems You Can Solve

Displayed Messages and
Explanations
The signal is too weak to make a call.
your system administrator.
Battery power is low. When the phone
rapid desk charger.
The phone does not recognize any base
administrator.
The text message memory is full and
ON. (See Messaging Menu, page 24.)
If you need additional information or assistance,
• In the U.S.A., call 1-877-71 ASCOM (1-877-712-7266)
Try again when
you are closer to
a base station or
turn the phone
OFF and ON. If
the problem
persists, notify
shuts itself off,
replace the
battery with a
fully charged
one. Or use an
alternate power
source, such as a
station. Try
turning the
phone OFF and
ON. If the
problem
persists, notify
your system
AutoDelete is
turned OFF.
Delete some
messages
yourself or
turn
AutoDelete
or would like to purchase accessories:
Problems You Can Solve
Problems and Possible
Solutions
The phone does not turn ON
Recharge or replace the battery.
Remove and reinsert the battery.
Phone is not ringing when a call is
received
Check the Sound Setup Menu to
make sure the phone is not set for
Meeting Profile.
Check the Ring Volume to make
sure it has not been set for the lowest
setting.
Phone becomes warm during long calls
This is not a problem. Because of its
size, the phone may feel slightly
warm during extended calls.
Battery does not seem to charge to full
capacity
Try a different battery.
Tones are not heard when pressing keys
during a call
Key Sound is turned OFF by default.
If audible tones are required, make
sure Key Sound in the Sound
Profile Menu is turned ON. See
page 28.
Beeping is heard through the headset
when the battery is low
The Battery Low alert indicates the
battery is reaching the end of its
charge. You should not attempt to
make calls in this state. Turn the
phone OFF and replace the battery.
Otherwise, the phone will shut off
automatically. The buzz should not
occur with an adequately charged
battery.
32

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 9P23 and is the answer not in the manual?

Table of Contents