Connect Power And Charge Headset; Connect Headset Base To Power Outlet; Charge The Headset For At Least 20 Minutes Before Using - Plantronics CS70 Series Setup Manual


C
onneCt
A. Connect Headset Base to power outlet
1
. Plug the Base Power Adapter into a wall outlet, then plug the power cord into the
labeled connector on the bottom of the Headset Base. The
front of the Headset Base will turn on. (See illustration at bottom of page.)
B. Charge the Headset for at least 20 Minutes before using
1
. Gently push the headset into the charging cradle as shown below. The
Status light on the base will flash to indicate the headset battery is charging. A solid
light indicates full charge. A full charge will take approximately 3 hours.
Power
(r )
ed

Plantronics CS70 Setup Guide
P
ower and
Headset Base
(bottom view)
Charge
Status
( )
amber
C h
harge eadSet
red
Insert into labeled power
yellow
connection on Headset Base as
shown to charge.
IMPORTANT! Make sure the headset
is facing correctly (as shown at left)
when inserted into the charging cradle.
yellow
Power light on the left
Base
Power
Adapter
Charge
amber