Install Automatic Handset Lifter; Connect Handset Lifter Power Cord To Headset Base - Plantronics CS70 Series Setup Manual


I
nStall
Why use a handset lifter?
a headset with your desk phone. It lets you answer and
end calls without being near your phone.
The HL10 Automatic Handset lifter is included with certain CS70 configurations and is
also available separately.
A. Connect Handset Lifter power cord to Headset Base
1
. Verify that the base-to-desk Phone Cable is connected to the handset port of the desk
phone, and not the headset port (Refer to Step 2, Configuration A).
2
.
firmly press
complete connection.
Headset Base
(bottom view)
Questions?
a
utomatIC
the Handset Lifter power cord into the
firmly
cord into
on Headset Base.
For fast, efficient Technical Support call:
h l
andSet Ifter
If you do not have the Lifter, skip to step 5.
The lifter greatly simplifies using
labeled port to ensure a
red
press Lifter power
labeled port
red
Automatic Handset Lifter
800-544-4660 Ext. 5538