Flashforge HUNTER Quick Start Manual page 9

1. Connect power cable and power adapter.
3. Insert the attached USB stick into Hunter.
Select Driver
Internal Memor y
USB Memor y
5. Tap [ USB Memory ].
Model View
7. Then tap start icon to start printing.
First Print
FileName: 20mm...dard
Material: FH1100(Stan...
Total Layer: 204
Layer Height: 0.05 MM
Build Time: 0 H 45 M
2. Plug the power cable into the input on the
back of Hunter and turn on the power switch.
Hunter
Settings
4. Press stand-by switch, then tap [Print].
File List
1/1
20mm_Box-Standard
6. Tap [20mm_box-Standard].
Print
08
Print
Name: 20mm_B...andard
Layer: 0/204
Time Remaining:
0H 45M