Get Started; Basic Voice Commands - Jeep 2018 GRAND CHEROKEE User Manual

Get Started

All you need to control your Uconnect system
with your voice are the buttons on your steer-
ing wheel.
1. Visit UconnectPhone.com to check mo-
bile device and feature compatibility and
to find phone pairing instructions.
2. Reduce background noise. Wind noise
and passenger conversations are ex-
amples of noise that may impact
recognition.
3. Speak clearly at a normal pace and vol-
ume while facing straight ahead. The mi-
crophone is located in the headliner and
aimed at the driver.
4. Each time you give a Voice Command, you
must first push either the VR or Phone
button, wait until after the beep, then say
your Voice Command.
5. You can interrupt the help message or
system prompts by pushing the VR or
Phone button and saying a Voice Com-
mand from current category.
346
Uconnect VR And Phone Buttons
1 — Uconnect Phone Button
2 — Uconnect Voice Recognition Button
3 — Phone Hang Up Button
Uconnect Phone Button , Push to initiate,
answer, or end a phone call.
Uconnect Voice Recognition Button
1. Short Press: Push and release the VR but-
ton to begin Radio, Climate, Navigation,
and other embedded functions. After you
hear the single beep, say a command.
2. Long Press: Push and hold continuously for
a few seconds, then release the VR button
for Siri functions. After you hear the fa-
miliar Siri "double beep," say a command.
Phone Hang Up Button, Push to end a call.

Basic Voice Commands

The basic Voice Commands below can be
given at any point while using your Uconnect
system.
Push the VR button . After the beep,
say...
• Cancel to stop a current voice session
• Help to hear a list of suggested Voice Com-
mands
• Repeat to listen to the system prompts
again
.