Table of Contents

Advertisement

5. Tail lamps are now visible. Rotate sock-
et(s) counter clockwise.
Rear Of Liftgate Tail Lamp
1 — Auxiliary LED Tail Connector –
Do Not Remove
2 — Backup Bulb Socket
6. Remove/replace bulb(s).
7. Reinstall the socket(s).
8. Reverse process to reinstall the liftgate
trim.
Center High-Mounted Stop Lamp (CHMSL)
The center high mounted stop lamp is an
LED. Service at an authorized dealer.
Center High-Mounted Stop Lamp
Rear License Lamp
The rear license lamps are LEDs. See your
authorized dealer for service.

FUSES

WARNING!
• When replacing a blown fuse, always use
an appropriate replacement fuse with
the same amp rating as the original fuse.
Never replace a fuse with another fuse of
higher amp rating. Never replace a
blown fuse with metal wires or any other
material. Do not place a fuse inside a
circuit breaker cavity or vice versa. Fail-
ure to use proper fuses may result in
serious personal injury, fire and/or prop-
erty damage.
• Before replacing a fuse, make sure that
the ignition is off and that all the other
services are switched off and/or disen-
gaged.
• If the replaced fuse blows again, contact
an authorized dealer.
• If a general protection fuse for safety
systems (air bag system, braking system),
power unit systems (engine system, trans-
mission system) or steering system blows,
contact an authorized dealer.
207

Advertisement

Table of Contents
loading

Table of Contents