Jeep 2018 GRAND CHEROKEE User Manual page 72

3. Push and hold the OK button until the
gauge resets to 100%.
Secondary Method For Oil Change Reset Proce-
dure
1. Without pushing the brake pedal, push
and release the ENGINE START/STOP
button and place the ignition to the ON/
RUN position (do not start the engine).
2. Fully press the accelerator pedal, slowly,
three times within ten seconds.
3. Without pushing the brake pedal, push
and release the ENGINE START/STOP
button once to return the ignition to the
OFF/LOCK position.
NOTE:
If the indicator message illuminates when
you start the vehicle, the oil change indicator
system did not reset. If necessary, repeat this
procedure.
70
Instrument Cluster Display Selectable Items
The instrument cluster display can be used to
view the following main menu items:
NOTE:
Depending on the vehicles options, feature
settings may vary.
• Speedometer • Trip
• MPH to km/h • Audio
• Vehicle Info • Stored Messages
• Driver Assist • Screen Setup
• Fuel Economy
NOTE:
Refer to your Owner's
www.mopar.com/en-us/care/owners-manual.html
(U.S. Residents) or www.owners.mopar.ca
(Canadian Residents) for further information.
Display Menu items
SRT Instrument Cluster Display Performance
Features
The instrument cluster display can be used to
program the following Performance Features.
SRT Performance Features Controls
• To access, press and release either the up or
down arrow button until "SRT" appears in
the instrument cluster display, then press
Manual at
and release the right arrow button to cycle
through the features. Press the OK button to
select a feature.
• 0-60 MPH
(0-100 km/h)
• 0-100 MPH
(0-161 km/h)
• 1/8 Mile Timer
• 1/4 Mile Timer
• 60 ft Timer
• Braking Distance
• Current G-Force
• Peak G-Force
• Lap Timer
• Lap History
• Top Speed