Page 1 Compass 2 0 1 4 O W N E R ’ S M A N U A L...
Page 2 VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name This manual illustrates and describes the operation of Chrysler Group LLC shall be deemed to be deleted and features and equipment that are either standard or the name Chrysler Canada Inc.
Page 3: Introduction 3
TABLE OF CONTENTS SECTION PAGE INTRODUCTION ............. 3 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE .
Page 5: Table Of Contents
INTRODUCTION CONTENTS INTRODUCTION ......4 WARNINGS AND CAUTIONS ....7 ROLLOVER WARNING .
Page 6: Introduction
4 INTRODUCTION INTRODUCTION When it comes to service, remember that your authorized dealer knows your vehicle best, has factory-trained tech- Congratulations on selecting your new Chrysler Group nicians and genuine parts, and cares about your satisfac- LLC vehicle. Be assured that it represents precision tion.
Page 7: How To Use This Manual
INTRODUCTION 5 control. Failure to operate this vehicle safely may result seat belts could cut the highway death toll by 10,000 or in a collision, rollover of the vehicle, and severe or fatal more each year and could reduce disabling injuries by injury.
Page 8 6 INTRODUCTION...
Page 9: Warnings And Cautions
INTRODUCTION 7 WARNINGS AND CAUTIONS This Owners Manual contains WARNINGS against op- erating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire Owners Manual, you may miss important information.
Page 10: Vehicle Modifications/Alterations
8 INTRODUCTION VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. Right Front Body VIN Location NOTE: It is illegal to remove or alter the VIN.
Page 11 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS ▫ Rearming The System ....19 A WORD ABOUT YOUR KEYS ... . .12 ▫...
Page 12 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Sound Horn With Remote Key Lock ..22 POWER WINDOWS — IF EQUIPPED ..36 ▫ Flash Lights With Remote Key Lock/Unlock . . .23 ▫...
Page 13 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Energy Management Feature ....55 ▫ Event Data Recorder (EDR) ....76 ▫...
Page 14: A Word About Your Keys
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Ignition Key Removal The authorized dealer that sold you your new vehicle has 1. Place the shift lever in PARK (if equipped with an the key code numbers for your vehicle locks. These automatic transmission).
Page 15 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 NOTE: If you try to remove the key before you place the shift lever in PARK, the key may become trapped tem- porarily in the ignition switch cylinder. If this occurs, place the shift lever in PARK, rotate the key clockwise slightly, then remove the key as described above.
Page 16: Locking Doors With A Key
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Locking Doors With A Key WARNING! (Continued) You can insert the key with either side up. To lock the • Allowing children to be in a vehicle unattended is door, turn the key to the right. To unlock the door, turn dangerous for a number of reasons.
Page 17: Sentry Key
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 SENTRY KEY® During normal operation, after turning on the ignition switch, the Vehicle Security Light will turn on for three The Sentry Key® Immobilizer System prevents unau- seconds for a bulb check. If the light remains on after the thorized vehicle operation by disabling the engine.
Page 18: Replacement Keys
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! CAUTION! The Sentry Key® Immobilizer system is not compat- Always remove the Sentry Keys® from the vehicle ible with some aftermarket remote starting systems. and lock all doors when leaving the vehicle unat- Use of these systems may result in vehicle starting tended.
Page 19: Customer Key Programming
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 Customer Key Programming 4. Insert a blank Sentry Key® into the ignition switch. Turn the ignition switch to the ON/RUN position If you have two valid Sentry Keys®, you can program within 60 seconds. After 10 seconds, a single chime new Sentry Keys®...
Page 20: General Information
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If a programmed key is lost, see your authorized NOTE: Changes or modifications not expressly approved dealer to have all remaining keys erased from the sys- by the party responsible for compliance could void the tem’s memory.
Page 21: To Arm The System
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 To Arm The System Rearming The System If something triggers the alarm, and no action is taken to 1. Remove the key from the ignition switch and get out disarm it, the Vehicle Security Alarm will turn off the of the vehicle.
Page 22: Vehicle Security Alarm Manual Override
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE once the Vehicle Security Alarm is armed (after 16 seconds), when you pull the door handle to exit, the alarm will sound. If this occurs, press the UNLOCK button on the RKE transmitter to disarm the Vehicle Security Alarm.
Page 23: To Unlock The Doors And Liftgate
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 • For vehicles not equipped with the EVIC, perform the To Unlock The Doors And Liftgate following steps: Press and release the UNLOCK button on the RKE transmitter once to unlock the driver’s door, or twice 1.
Page 24: Illuminated Approach - If Equipped
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Pressing the LOCK button on the RKE transmit- To Lock The Doors And Liftgate ter while you are inside the vehicle will activate the Press and release the LOCK button on the RKE transmit- Vehicle Security Alarm.
Page 25: Flash Lights With Remote Key Lock/Unlock
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 • For vehicles not equipped with the EVIC, perform the NOTE: Pressing the LOCK button on the RKE transmit- following steps: ter while you are in the vehicle will activate the Vehicle Security Alarm.
Page 26: Using The Panic Alarm
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the NOTE: Pressing the LOCK button on the RKE transmit- following steps: ter while you are in the vehicle will activate the Vehicle Security Alarm.
Page 27: Programming Additional Transmitters
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 NOTE: When you turn off the Panic Alarm by pressing the PANIC button a second time, you may have to move closer to the vehicle due to the radio frequency noises of the system.
Page 28: General Information
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If the RKE transmitter is equipped with a screw, 1. A weak battery in the transmitter. The expected life of reinstall and tighten the screw until snug. the battery is a minimum of three years. General Information 2.
Page 29: How To Use Remote Start
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 • Battery at an acceptable charge level NOTE: • The vehicle must be equipped with an automatic • RKE PANIC button not pressed transmission to be equipped with Remote Start. • System not disabled from previous remote start event •...
Page 30 28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Remote Start Abort Message On Electronic Vehicle To Enter Remote Start Information Center (EVIC) — If Equipped The following messages will display in the EVIC if the Press and release the REMOTE START button vehicle fails to remote start or exits remote start prema- on the RKE transmitter twice within five sec- turely:...
Page 31: To Exit Remote Start And Drive
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 • The engine can be started two consecutive times (two To Exit Remote Start Mode Without Driving The 15-minute cycles) with the RKE transmitter. However, Vehicle the ignition switch must be cycled to the ON/RUN Press and release the REMOTE START button one time or position before you can repeat the start sequence for a allow the engine to run for the entire 15-minute cycle.
Page 32: Door Locks
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE DOOR LOCKS Manual Door Locks Use the manual door lock knob to lock the doors from inside the vehicle. If the lock knob is down when the door is closed, the door will lock. Make sure the keys are not inside the vehicle before closing the door.
Page 33: Power Door Locks
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 Power Door Locks WARNING! (Continued) A power door lock switch is located on the driver’s and • Never leave children alone in a vehicle, or with front passenger’s door panel. Press this switch to lock or access to an unlocked vehicle.
Page 34 32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto Lock Doors — If Equipped The auto door lock feature default condition is enabled. When enabled, the door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h). Auto Lock Doors Programming The Automatic Door Locks feature can be enabled or disabled as follows:...
Page 35 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 2. Within 15 seconds, cycle the ignition switch between Automatic Unlock Doors On Exit LOCK and ON/RUN and then back to LOCK four The doors will unlock automatically if: times ending up in the LOCK position (do not start the •...
Page 36: Child-Protection Door Lock System - Rear Doors
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Equipped/Personal Settings (Customer- NOTE: Programmable Features)” in “Understanding Your In- • If you do not hear the chime it means that the system strument Panel” for further information. did not enter the programming mode and you will •...
Page 37 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 To Engage Or Disengage The Child-Protection Door Lock System 1. Open the rear door. 2. Insert the tip of the ignition key into the lock and rotate to the LOCK or UNLOCK position. 3.
Page 38: Power Windows - If Equipped
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: For emergency exit with the system engaged, move the lock knob up (unlocked position), roll down the window and open the door with the outside door handle. POWER WINDOWS — IF EQUIPPED Power Window Switches The window controls on the driver’s door trim panel control all the door windows.
Page 39 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 • For vehicles equipped with the EVIC, the power window switches will remain active for up to 10 minutes after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. The time for this feature is programmable.
Page 40: Auto-Down
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto-Down The driver’s door window switch has an Auto-Down feature. Push the window switch past the first detent, release, and the window will go down automatically. To cancel the Auto-Down movement, operate the switch in either the up or down direction and release the switch.
Page 41: Liftgate
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 LIFTGATE NOTE: The key that is used to start the vehicle is also used to lock or unlock the doors and open the liftgate. To unlock the liftgate, insert the key into the lock and turn it to the right (manual lock models only).
Page 42: Occupant Restraints
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Although the liftgate has no inside release mechanism, Gas props support the liftgate in the open position. the liftgate trim panel includes an opening with a However, because the gas pressure drops with tempera- snap-in cap that provides access to release the latch in ture, it may be necessary to assist the props when the event of an electrical system malfunction.
Page 43 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 • Supplemental Seat-Mounted Side Air Bags (SAB) — if Please pay close attention to the information in this equipped section. It tells you how to use your restraint system properly, to keep you and your passengers as safe as •...
Page 44 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Here are some simple steps you can take to minimize the ride properly buckled up in the rear seat. Never allow risk of harm from a deploying air bag: children to slide the shoulder belt behind them or under their arm.
Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 4. Do not lean against the door or window. If your WARNING! (Continued) vehicle has side air bags, and deployment occurs, the • Being too close to the steering wheel or instrument side air bags will inflate forcefully into the space panel during Advanced Front Air Bag deployment between you and the door.
Page 46: Lap/Shoulder Belts
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Research has shown that seat belts save lives, and they WARNING! (Continued) can reduce the seriousness of injuries in a collision. Some • In a collision, you and your passengers can suffer of the worst injuries happen when people are thrown much greater injuries if you are not properly buck- from the vehicle.
Page 47 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 WARNING! WARNING! (Continued) • Wearing your belt in the wrong place could make • It is dangerous to ride in a cargo area, inside or your injuries in a collision much worse. You might outside of a vehicle.
Page 48 46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE the belt. Slide the latch plate up the webbing as far as necessary to allow the belt to go around your lap. Inserting Latch Plate Into Buckle Pulling Out The Latch Plate 3.
Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 WARNING! WARNING! (Continued) • A belt that is worn under your arm is dangerous. • A belt buckled into the wrong buckle will not Your body could strike the inside surfaces of the protect you properly.
Page 50 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Position the lap belt across your thighs, below your WARNING! abdomen. To remove slack in the lap belt portion, pull • A lap belt worn too high can increase the risk of up on the shoulder belt.
Page 51: Adjustable Upper Shoulder Belt Anchorage
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 6. To release the belt, push the red button on the buckle. Adjustable Upper Shoulder Belt Anchorage The belt will automatically retract to its stowed posi- In the front seat, the shoulder belt can be adjusted tion.
Page 52: Second Row Center Lap/Shoulder Belt Operating Instructions
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE In the rear seat, move toward the center of the seat to position the belt away from your neck. Second Row Center Lap/Shoulder Belt Operating Instructions The second row center lap/shoulder belt features a three-point seat belt with a mini-latch and buckle, which allows the shoulder belt to detach from the lower anchor when the seat is folded.
Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 Mini-Latch Stowage Routing The Rear Center Shoulder Belt 2. Grasp the mini-latch plate and pull the belt over the 4. When the belt is long enough to fit, insert the mini- seat. latch plate into the mini-buckle until you hear a “click”.
Page 54 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click”. Rear Center Seat Belt Buckled 8. Position the shoulder belt on your chest so that it is Connecting Mini-Latch To Buckle comfortable and not resting on your neck.
Page 55: Lap/Shoulder Belt Untwisting Procedure
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 automatically retract to its stowed position. If neces- sary, slide the latch plate down the webbing to allow the belt to retract fully. Insert the mini-latch plate into the slot provided in the trim panel. Lap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ shoulder belt.
Page 56: Seat Belts In Passenger Seating Positions
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Continue to slide the latch plate up until it clears the If the passenger seating position is equipped with an folded webbing. ALR and is being used for normal usage: Only pull the belt webbing out far enough to comfortably Seat Belts In Passenger Seating Positions wrap around the occupant’s mid-section so as to not The seat belts in the passenger seating positions are...
Page 57: Energy Management Feature
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 position that has a belt with this feature. Children 12 WARNING! years old and under should always be properly re- • The belt and retractor assembly must be replaced if strained in a vehicle with a rear seat. the seat belt assembly Automatic Locking Retractor How To Engage The Automatic Locking Mode (ALR) feature or any other seat belt function is not...
Page 58: Seat Belt Pretensioners
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belt Pretensioners Supplemental Active Head Restraints (AHR) The seat belts for both front seating positions are These head restraints are passive, deployable compo- equipped with pretensioning devices that are designed to nents, and vehicles with this equipment cannot be readily remove slack from the seat belt in the event of a collision.
Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 This system is designed to help prevent or reduce the extent of injuries to the driver and front passenger in certain types of rear impacts. NOTE: The Active Head Restraints (AHR) may or may not deploy in the event of a front or side impact.
Page 60 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Grasp the deployed AHR from the rear seat. CAUTION! All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision.
Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. Review Table Below 1 — Downward Movement 2 — Rearward Movement 3 — Final Downward Movement To Engage Locking Mechanism...
Page 62: Enhanced Seat Belt Use Reminder System (Beltalert®)
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For safety reasons, have the Active Head Restraints checked by a qualified specialist at an authorized dealer. Enhanced Seat Belt Use Reminder System (BeltAlert®) BeltAlert® is a feature intended to remind the driver and front passenger (if equipped with front passenger BeltAlert®) to fasten their seat belts.
Page 63: Seat Belt Extender
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 Light remains illuminated until the respective seat belts NOTE: Although BeltAlert® has been deactivated, the are fastened. The driver should instruct all other occu- Seat Belt Reminder Light will continue to illuminate pants to fasten their seat belts.
Page 64: Seat Belts And Pregnant Women
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Restraint System (SRS) — Air Bags WARNING! (Continued) This vehicle has Advanced Front Air Bags for both the when the seat belt is not long enough when it is worn driver and front passenger as a supplement to the seat low and snug and in the recommended seating posi- belt restraint systems.
Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 The Advanced Front Air Bags have a multistage inflator design. This allows the air bag to have different rates of inflation that are based on the severity and type of collision. This vehicle may be equipped with a driver and/or front passenger seat belt buckle switch that detects whether the driver or front passenger seat belt is fastened.
Page 66: Advanced Front Air Bag Features
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Knee Impact Bolsters protection for an occupant during a side impact. The Supplemental Seat-Mounted Side Air Bags are located in • Driver Advanced Front Air Bag the outboard side of the front seats. •...
Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 The first stage inflator is triggered immediately during an WARNING! (Continued) impact that requires air bag deployment. This low output • Do not put anything on or around the air bag is used in less severe collisions. A higher energy output is covers or attempt to open them manually.
Page 68 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Seat-Mounted Side Air Bags (SAB) When the air bag deploys, it opens the seam between the — If Equipped front and side of the seat’s trim cover. Each air bag deploys independently; a left side impact deploys the left Supplemental Seat-Mounted Side Air Bags (SAB) may air bag only and a right-side impact deploys the right air provide enhanced protection to help protect an occupant...
Page 69 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 • Air Bag covers may not be obvious in the interior trim, but they will open during air bag deployment. • Being too close to the Supplemental Side Air Bag Inflatable Curtain and/or Seat-Mounted Side Air Bag during deployment could cause you to be severely injured or killed.
Page 70 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE windows, or area where the SAB or SABIC air bags WARNING! (Continued) inflate, even if they are in an infant or child restraint. • Do not use accessory seat covers or place objects Always sit upright as possible with your back against the between you and the SAB;...
Page 71: Air Bag Deployment Sensors And Controls
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 Air Bag Deployment Sensors And Controls The Advanced Front Air Bags will not deploy in all frontal collisions, including some that may produce sub- Occupant Restraint Controller (ORC) stantial vehicle damage — for example, some pole colli- The ORC is part of a Federally regulated safety system sions, truck underrides, and angle offset collisions.
Page 72 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The ORC monitors the readiness of the electronic parts of It also includes diagnostics that will illuminate the instru- the air bag system whenever the ignition switch is in the ment cluster Air Bag Warning Light if a malfunction is START or ON/RUN position.
Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 When the ORC detects a collision requiring the Ad- Supplemental Seat-Mounted Side Air Bag (SAB) vanced Front Air Bags, it signals the inflator units. A large Inflator Units quantity of non-toxic gas is generated to inflate the The Supplemental Seat-Mounted Side Air Bags (SAB) are Advanced Front Air Bags.
Page 74 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Side Air Bag Inflatable Curtain Because air bag sensors estimate deceleration over time, (SABIC) Inflator Units vehicle speed and damage are not good indicators of whether or not an air bag should have deployed. During collisions where the impact is confined to a particular area of the side of the vehicle, the ORC may NOTE: In a rollover the pretensioners and/or SAB and...
Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 • Flash hazard lights as long as the battery has power or If you do have a collision, which deploys the air bags, any until the ignition key is turned off. or all of the following may occur: •...
Page 76 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE throat irritation, move to fresh air. If the irritation Maintaining Your Air Bag System continues, see your doctor. If these particles settle on your clothing, follow the garment manufacturer’s in- WARNING! structions for cleaning. •...
Page 77 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 Air Bag Warning Light WARNING! (Continued) • Do not attempt to modify any part of your air bag You will want to have the air bags ready to system. The air bag may inflate accidentally or may inflate for your protection in a collision.
Page 78: Event Data Recorder (Edr)
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • How various systems in your vehicle were operating; NOTE: If the speedometer, tachometer, or any engine related gauges are not working, the Occupant Restraint • Whether or not the driver and passenger safety belts Controller (ORC) may also be disabled.
Page 79: Child Restraints
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 To read data recorded by an EDR, special equipment is There are different sizes and types of restraints for required, and access to the vehicle or the EDR is needed. children from newborn size to the child almost large In addition to the vehicle manufacturer, other parties, enough for an adult safety belt.
Page 80 78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: WARNING! • For additional information, refer In a collision, an unrestrained child can become a www.seatcheck.org or call 1–866–SEATCHECK. Cana- projectile inside the vehicle. The force required to dian residents should refer to Transport Canada’s hold even an infant on your lap could become so website for additional information: great that you could not hold the child, no matter...
Page 81 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Infants and Children who are two years old or Either an Infant Carrier or a Convertible Toddlers younger and who have not reached the Child Restraint, facing rearward in the rear...
Page 82 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infants And Child Restraints reach the highest weight or height allowed by their convertible child seat. Safety experts recommend that children ride rearward- facing in the vehicle until they are two years old or until WARNING! they reach either the height or weight limit of their rear facing child safety seat.
Page 83 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 have outgrown the rear-facing weight or height limit of WARNING! their rear-facing convertible child seat. Children should • Improper installation can lead to failure of an remain in a forward-facing child seat with a harness for as long as possible, up to the highest weight or height infant or child restraint.
Page 84 82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Can the child sit all the way back against the back of WARNING! (Continued) the vehicle seat? • When your child restraint is not in use, secure it in 2. Do the child’s knees bend comfortably over the front the vehicle with the seat belt or LATCH anchor- of the vehicle seat –...
Page 85 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 If the answer to any of these questions was “no,” then the WARNING! child still needs to use a booster seat in this vehicle. If the child is using the lap/shoulder belt, check belt fit peri- Never allow a child to put the shoulder belt under an odically and make sure the seat belt buckle is latched.
Page 86 84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Recommendations For Attaching Child Restraints Use any attachment method shown with an “X” Below Combined LATCH – Weight of the LATCH – Restraint Type Lower Anchors Seat Belt + Top Child + Child Lower Anchors Seat Belt Only + Top Tether...
Page 87 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 Lower Anchors And Tethers For Children (LATCH) Your vehicle is equipped with the child restraint anchor- Restraint System age system called LATCH, which stands for Lower Anchors and Tethers for CHildren. The LATCH system has three vehicle anchor points for installing LATCH- equipped child seats.
Page 88 86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH Positions For Installing Child Restraints In This Vehicle • Lower Anchorage Symbol 2 anchorages per seating position • Top Tether Anchorage Symbol...
Page 89 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 What is the weight limit (child’s weight + 65 lbs (29.5 kg) Use the LATCH anchorage system until weight of the child restraint) for using the the combined weight of the child and the LATCH anchorage system to attach the child child restraint is 65 lbs (29.5 kg).
Page 90 88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Can two child restraints be attached using Never “share” a LATCH anchorage with a common lower LATCH anchorage? two or more child restraints. If the center position does not have dedicated LATCH lower anchorages, use the seat belt to in- stall a child seat in the center position next to a child seat using the LATCH anchor-...
Page 91 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 Locating The LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They are just visible when you lean into the rear seat to install the child restraint.
Page 92 90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Locating The LATCH Anchorages of child restraint in the outboard seating positions. Child restraints with flexible, webbing mounted lower attach- ments can be installed in any rear seating position. In addition, there are tether strap anchorages behind each rear seating position located on WARNING! the back of the seat.
Page 93 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 To Install A LATCH-Compatible Child Restraint move it to its rear-most position to make room for the child seat. You may also move the front seat forward 1. If the selected seating position has a Switchable Auto- to allow more room for the child seat.
Page 94 92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 7. Test that the child restraint is installed tightly by WARNING! pulling back and forth on the child seat at the belt • Improper installation of a child restraint to the path. It should not move more than 1 inch (25.4 mm) in any direction.
Page 95 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 Installing Child Restraints Using The Vehicle Seat Lap/Shoulder Belt Systems For Installing Child Belt Restraints In This Vehicle The seat belts in the passenger seating positions are equipped with a Switchable Automatic Locking Retractor (ALR) that is designed to keep the lap portion of the seat belt tight around the child restraint so that it is not necessary to use a locking clip.
Page 96 94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE What is the weight limit (child’s Weight limit of the Always use the tether anchor when using the seat belt weight + weight of the child re- Child Restraint to install a forward facing child restraint, up to the straint) for using the Tether Anchor recommended weight limit of the child restraint.
Page 97 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 Installing A Child Restraint With A Switchable 4. Pull on the webbing to make the lap portion tight Automatic Locking Retractor (ALR) against the child seat. 1. Place the child seat in the center of the seating 5.
Page 98 96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE the tether strap to the anchorage and tighten the tether rear-most position to make room for the child seat. strap. See the section “Installing Child Restraints You may also move the front seat forward to allow Using the Top Tether Anchorage”...
Page 99 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 97 strap. Refer to “Installing Child Restraints Using The If the belt still cannot be tightened after you shorten the Top Tether Anchorage” for directions to attach a tether buckle, disconnect the latch plate from the buckle, turn anchor.
Page 100 98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Attach the tether strap hook of the child restraint to WARNING! the top tether anchorage as shown in the diagram. • An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child.
Page 101: Engine Break-In Recommendations
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99 ENGINE BREAK-IN RECOMMENDATIONS CAUTION! A long break-in period is not required for the engine and Never use Non-Detergent Oil or Straight Mineral Oil drivetrain (transmission and axle) in your vehicle. in the engine or damage may result. Drive moderately during the first 300 miles (500 km).
Page 102: Exhaust Gas
100 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Exhaust Gas WARNING! • Do not leave children or animals inside parked WARNING! vehicles in hot weather. Interior heat build-up may Exhaust gases can injure or kill. They contain carbon cause serious injury or death. monoxide (CO), which is colorless and odorless.
Page 103: Safety Checks You Should Make Inside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 101 Safety Checks You Should Make Inside The WARNING! (Continued) Vehicle • If it is necessary to sit in a parked vehicle with the Seat Belts engine running, adjust your heating or cooling controls to force outside air into the vehicle.
Page 104 102 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Air Bag Warning Light Floor Mat Safety Information Always use floor mats designed to fit the footwell of your The light should come on and remain on for vehicle. Use only floor mats that leave the pedal area four to eight seconds as a bulb check when the unobstructed and that are firmly secured so that they ignition switch is first turned ON.
Page 105 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 103 WARNING! (Continued) WARNING! (Continued) • Never place or install floor mats or other floor • Always make sure that objects cannot fall into the coverings in the vehicle that cannot be properly driver footwell while the vehicle is moving.
Page 106: Periodic Safety Checks You Should Make Outside
104 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Periodic Safety Checks You Should Make Outside Door Latches The Vehicle Check for positive closing, latching, and locking. Tires Fluid Leaks Examine tires for excessive tread wear and uneven wear Check area under vehicle after overnight parking for fuel, patterns.
Page 107: Understanding The Features Of Your Vehicle
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS MIRRORS ......109 Uconnect® Phone — IF EQUIPPED ..113 ▫...
Page 108 106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Commands ......146 ▫ Reclining Rear Seat — If Equipped ..163 ▫...
Page 109 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 ▫ To Accelerate For Passing ....180 WINDSHIELD WIPERS AND WASHERS ..172 ▫ Windshield Wiper Operation ... . .173 PARKVIEW®...
Page 110 108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Opening Sunroof — Manual Mode ..194 ▫ Glove Compartment And Storage Bin ..202 ▫ Closing Sunroof — Express....194 ▫...
Page 111: Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of vehicle).
Page 112: Automatic Dimming Mirror - If Equipped
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light to the left of the button will illuminate to indicate when the dimming feature is activated.
Page 113: Outside Mirror - Driver Side
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Outside Mirror — Driver Side Folding Outside Mirrors Adjust the flat outside mirror so you can just see the side The outside mirrors are hinged and may be moved, of your vehicle in the part of the mirror closest to the manually, either forward or rearward to resist damage.
Page 114: Heated Mirrors - If Equipped
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Heated Mirrors — If Equipped These mirrors are heated to melt frost or ice. This feature is activated whenever you turn on the rear window defroster. Refer to “Rear Window Features” in “Understanding The Features Of Your Vehicle” for fur- ther information.
Page 115: Sun Visor Sliding Feature
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 Uconnect® Phone — IF EQUIPPED Uconnect® Phone is a voice-activated, hands-free, in- vehicle communications system. Uconnect® Phone al- lows you to dial a phone number with your mobile phone using simple voice commands (e.g., “Call” “Mike”...
Page 116 114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE For Uconnect® customer support: long as your phone is turned on and has been paired to the vehicle’s Uconnect® Phone. The Uconnect® Phone • U.S. residents - visit www.UconnectPhone.com or call allows up to seven mobile phones to be linked to the 1-877-855-8400.
Page 117: Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 Uconnect® Phone Button The Uconnect® Phone is fully integrated with the vehi- cle’s audio system. The volume of the Uconnect® Phone The radio or steering wheel controls (if can be adjusted either from the radio volume control equipped) will contain the two control buttons knob or from the steering wheel radio control (right (Uconnect®...
Page 118 116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Prior to giving a voice command, one must wait for the Voice Command Tree beep, which follows the “Ready” prompt or another Refer to “Voice Tree” in this section. prompt. Help Command •...
Page 119 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 Pair (Link) Uconnect® Phone To A Mobile Phone into your mobile phone. You can enter any four-digit PIN. You will not need to remember this PIN after the To begin using your Uconnect® Phone, you must pair initial pairing process.
Page 120 118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the “Ready” prompt and the following beep, say can select to use a lower priority mobile phone at any time (refer to “Advanced Phone Connectivity” in this “Call.” section). • The system will prompt you to say the name of the Dial By Saying A Number person you want to call.
Page 121 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 • Press the button to begin. The Uconnect® Phone will allow you to enter up to 32 names in the phonebook with each name having up to • After the “Ready” prompt and the following beep, say four associated phone numbers and designations.
Page 122 120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Automatic download and update, if supported, begins • This downloaded phonebook cannot be edited or as soon as the Bluetooth® wireless phone connection is deleted on the Uconnect® Phone. These can only be made to the Uconnect®...
Page 123 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 • When prompted, recite the new phone number for the • After the “Ready” prompt and the following beep, say phonebook entry that you are editing. “Phonebook Delete.” • After you enter the Phonebook Delete menu, you will After you are finished editing an entry in the phonebook, you will be given the opportunity to edit another entry in then be asked for the name of the entry that you wish...
Page 124 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Automatic downloaded phonebook entries cannot be List All Names In The Uconnect® Phonebook deleted or edited. • Press the button to begin. Delete/Erase “All” Uconnect® Phonebook Entries • After the “Ready” prompt and the following beep, say •...
Page 125: Phone Call Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 Phone Call Features Answer Or Reject An Incoming Call — Call Currently In Progress The following features can be accessed through the Uconnect® Phone if the feature(s) are available on your If a call is currently in progress and you have another mobile service plan.
Page 126 124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Making A Second Call While Current Call Is In Toggling Between Calls Progress If two calls are in progress (one active and one on hold), To make a second call while you are currently on a call, press the button until you hear a single beep, press the...
Page 127 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 • The Uconnect® Phone will call the last number that established, press and hold the button until you hear a double beep, indicating that the two calls have was dialed from your mobile phone. been joined into one conference call.
Page 128: Uconnect® Phone Features
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. After the ignition is cycled to OFF, a call can continue After selecting one of the languages, all prompts and on the Uconnect® Phone for a certain duration, after voice commands will be in that language. which the call is automatically transferred from the NOTE: After every Uconnect®...
Page 129 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 • After the “Ready” prompt and the following beep, say WARNING! “Emergency” and the Uconnect® Phone will instruct the paired mobile phone to call the emergency number. To use your Uconnect® Phone System in an emer- This feature is supported in the U.S., Canada, and gency, your mobile phone must be: •...
Page 130 128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: You should program the desired Towing Assis- Working With Automated Systems tance phone number using the Voice Command system. This method is used in instances where one generally has To do this, press the button and say “Setup,” followed by to press numbers on the mobile phone keypad while “Towing Assistance.”...
Page 131 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 by “Send,” is also to be used for navigating through an NOTE: automated customer service center menu structure, • You may not hear all of the tones due to mobile phone and to leave a number on a pager. network configurations.
Page 132 130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turning Confirmation Prompts ON/OFF using Uconnect® Phone. The status is given for network signal strength, phone battery strength, etc. Turning confirmation prompts off will stop the system from confirming your choices (e.g., the Uconnect® Phone Dialing Using The Mobile Phone Keypad will not repeat a phone number before you dial it).
Page 133: Advanced Phone Connectivity
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 Mute/Un-Mute (Mute ON/OFF) from your Uconnect® Phone paired mobile phone to the Uconnect® Phone or vice versa, press the button When you mute the Uconnect® Phone, you will still be and say “Transfer Call.” able to hear the conversation coming from the other party, but the other party will not be able to hear you.
Page 134 132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When prompted, say “List Phones.” • The selected phone will be used for the next phone call. If the selected phone is not available, the • The Uconnect® Phone will play the phone names of all Uconnect®...
Page 135: Things You Should Know About Your Uconnect
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 • Press the Things You Should Know About Your Uconnect® button and say the “Voice Training,” Phone “System Training,” or “Start Voice Training” com- mand. Uconnect® Phone Tutorial You can either press the Uconnect® Phone button to To hear a brief tutorial of the system features, press the restore the factory setting or repeat the words and button and say “Uconnect®...
Page 136 134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Low-to-medium vehicle speed This will delete all phone pairing, phone book entries, and other settings in all language modes. The System will • Low road noise prompt you before resetting to factory settings. •...
Page 137 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 • It is not recommended to store similar sounding names Far End Audio Performance in the Uconnect® Phonebook. • Audio quality is maximized under: • Phonebook (Downloaded and Uconnect® Phone Lo- • Low-To-Medium Blower Setting cal) name recognition rate is optimized when the •...
Page 138 136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • In a convertible vehicle, system performance may be 2. After the “Ready” prompt and the following beep, say compromised with the convertible top down “SMS Read” or “Read Messages.” Recent Calls 3. Uconnect® Phone will play the new text message for you.
Page 139 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 To send a message, press the button while the 9. Call me later. system is listing the message and say “Send.” 10. Thanks. Uconnect® Phone will prompt you to say the name or number of the person you wish to send the message 11.
Page 140 138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn Voice Text Reply Incoming Announcement ON/ Bluetooth® Communication Link Mobile phones have been found to lose connection to the Uconnect® Phone. When this happens, the connection Turning the Voice Text Reply Incoming Announcement can generally be reestablished by switching the phone OFF will stop the system from announcing the new off/on.
Page 141 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139...
Page 142 140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 143 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141...
Page 144 142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Voice Commands Primary Alternate (s) Primary Alternate (s) zero call cancel three confirmation prompts four continue five delete dial seven download eight edit nine emergency star (*) English plus (+) erase all pound (#) Espanol add location...
Page 145 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 Voice Commands Voice Commands Primary Alternate (s) Primary Alternate (s) help previous home record again language redial list names return to main menu return or main menu list phones select phone select mobile send mute set up...
Page 146: General Information
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information VOICE COMMAND — IF EQUIPPED This device complies with Part 15 of the FCC rules and Voice Command System Operation RSS 210 of Industry Canada. Operation is subject to the following conditions: The Uconnect®...
Page 147 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 Pressing the Voice Command button while the WARNING! system is speaking is known as “barging in.” The system will be interrupted, and after the beep, you can Any voice commanded system should be used only add or change commands.
Page 148: Commands
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To hear the first available Menu, press the Voice Com- Main Menu mand button and say “Help” or “Main Menu.” Start a dialogue by pressing the Voice Command button. You may say “Main Menu” to switch to Commands the main menu.
Page 149 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 • “Menu Radio” (to switch to the radio menu) Radio AM • “Main Menu” (to switch to the main menu) To switch to the AM band, say “AM” or “Radio AM.” In this mode, you may say the following commands: Satellite Radio •...
Page 150 148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Disc Mode Bluetooth® Streaming (BT) Mode To switch to the disc mode, say “Disc.” In this mode, you To switch to Bluetooth® Streaming (BT) mode, say may say the following commands: “Bluetooth Streaming.” In this mode, you may say the following commands: •...
Page 151 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 • “Switch to system setup” – “Continue” (to continue recording) • “Main menu setup” – “Delete” (to delete the recording) • “Switch to setup” • “Play Memos” (to play previously recorded memos) — During the playback you may press the Voice Com- In this mode, you may say the following commands: mand...
Page 152: Voice Training
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Training SEATS For users experiencing difficulty with the system recog- Seats are a part of the Occupant Restraint System of the nizing their voice commands or numbers the Uconnect® vehicle. Voice “Voice Training” feature may be used. WARNING! 1.
Page 153: Power Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 Power Seats — If Equipped WARNING! Some models may be equipped with a power driver’s • Adjusting a seat while driving may be dangerous. seat. The power seat switch is located on the outboard Moving a seat while driving could result in loss of side of the seat near the floor.
Page 154: Heated Seats - If Equipped
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adjusting The Seat Forward Or Rearward Heated Seats — If Equipped The seat can be adjusted both forward and rearward. On some models, the front driver and passenger seats Push the seat switch forward or rearward, the seat will may be equipped with heaters in both the seat cushions move in the direction of the switch.
Page 155 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 When the HIGH-level setting is selected, the heater will WARNING! provide a boosted heat level during the initial stages of • Persons who are unable to feel pain to the skin operation. Then, the heat output will drop to the normal HI-level.
Page 156: Manual Front Seat Adjustment
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Front Seat Adjustment On models equipped with manual seats, the adjusting bar is located at the front of the seats, near the floor. While sitting in the seat, lift up on the bar and move the seat forward or rearward.
Page 157: Manual Seat Height Adjustment - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
Page 158: Manual Lumbar - If Equipped
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Lumbar — If Equipped Driver’s Seatback Recline The lumbar adjustment handle is located on the outboard To adjust the seatback, lift the lever located on the side of the driver’s seatback. Rotate the lever downward outboard side of the seat, lean back to the desired angle to increase the lumbar support or rotate the lever upward and release the lever.
Page 159: Fold-Flat Front Passenger Seat - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 WARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death. Fold-Flat Front Passenger Seat —...
Page 160: Head Restraints
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! The head restraints for all occupants must be prop- erly adjusted prior to operating the vehicle or occu- pying a seat. Head restraints should never be ad- justed while the vehicle is in motion. Driving a vehicle with the head restraints improperly adjusted or removed could cause serious injury or death in the event of a collision.
Page 161 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 When AHRs deploy during a rear impact, the front half of the head restraint extends forward to minimize the gap between the back of the occupant’s head and the AHR. This system is designed to help prevent or reduce the extent of injuries to the driver and front passenger in certain types of rear impacts.
Page 162 160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Active Head Restraint (Normal Position) Active Head Restraint (Tilted Position)
Page 163 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 NOTE: WARNING! • The head restraints should only be removed by quali- • Do not place items over the top of the Active Head fied technicians, for service purposes only. If either of Restraint, such as coats, seat covers or portable the head restraints require removal, see your autho- DVD players.
Page 164: Folding Rear Seat
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Head Restraints The head restraints in the rear are non adjustable. Refer to “Occupant Restraints” in “Things To Know Before Start- ing Your Vehicle” for information on Tether routing. Folding Rear Seat To provide additional storage area, each rear seatback can be folded forward.
Page 165: Reclining Rear Seat - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 WARNING! Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury.
Page 166: To Open And Close The Hood
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only when the vehicle is parked.
Page 167 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 Hood Safety Latch Location Prop Rod Location Lift the hood prop rod, clipped to the right side (left side CAUTION! facing hood) of the engine compartment to secure the hood in the open position. Place the hood prop at the To prevent possible damage, do not slam the hood to location stamped into the inner hood surface.
Page 168: Lights
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE the passing lights, and the fog lights. The multifunction CAUTION! (Continued) lever is located on the left side of the steering column. both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged. WARNING! Be sure the hood is fully latched before driving your vehicle.
Page 169: Daytime Running Lights - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 Lights-On Reminder If the headlights or parking lights are left on after the ignition is turned OFF, a chime will sound to alert the driver when the driver’s door is opened. Fog Lights — If Equipped The front fog light switch is on the multifunc- tion lever.
Page 170: Turn Signals
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn Signals Move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights. Front Fog Light Operation NOTE: The fog lights will only operate with the head- lights on low beam.
Page 171: High/Low Beam Switch
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 NOTE: If either light remains on and does not flash, or Flash-To-Pass there is a very fast flash rate, check for a defective outside You can signal another vehicle with your headlights by light bulb.
Page 172: Instrument Panel Dimming
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Instrument Panel Dimming Rotate the center portion of the lever to the extreme bottom position to fully dim the instrument panel lights and prevent the interior lights from illuminating when a door is opened. Rotate the center portion of the lever up to increase the brightness of the instrument panel lights when the park- ing lights or headlights are on.
Page 173: Map/Reading Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 Map/Reading Lights These lights are mounted between the sun visors above the rear view mirror. Each light is turned on by pressing the button. Press the button a second time to turn the light off.
Page 174: Windshield Wipers And Washers
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WINDSHIELD WIPERS AND WASHERS The windshield wiper/washer control lever is located on the right side of the steering column. The front wipers are operated by rotating a switch, located on the end of the lever. For information on the rear wiper/washer, refer to “Rear Window Fea- tures”...
Page 175: Windshield Wiper Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 Windshield Wiper Operation CAUTION! Rotate the end of the lever upward to the second detent • Turn the windshield wipers off when driving past the intermittent settings for low-speed wiper opera- through an automatic car wash. Damage to the tion.
Page 176: Intermittent Wiper System
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Intermittent Wiper System while the lever is pulled and for two wipe cycles after the lever is released, and then resume the intermittent inter- Use the intermittent wiper when weather conditions val previously selected. make a single wiping cycle, with a variable pause be- tween cycles, desirable.
Page 177: Mist Feature
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 Mist Feature Push down on the control lever to activate a single wipe to clear the windshield of road mist or spray from a passing vehicle. As long as the lever is held down, the wipers will continue to operate.
Page 178: Tilt Steering Column
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TILT STEERING COLUMN This feature allows you to tilt the steering column upward or downward. The tilt steering column lever is located on the left side of the steering column, below the turn signal lever. Push down on the lever to unlock the steering column.
Page 179: Electronic Speed Control - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 WARNING! (Continued) the driver to lose control of the vehicle. Failure to follow this warning may result in serious injury or death. ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 25 mph (40 km/h).
Page 180: To Activate
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: In order to ensure proper operation, the Elec- WARNING! tronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at Leaving the Electronic Speed Control system on the same time.
Page 181: To Deactivate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 To Deactivate The speed increment shown is dependant on the chosen speed unit of U.S. (mph) or Metric (km/h): A soft tap on the brake pedal, pushing the CANCEL button, or normal brake pressure while slowing the U.S.
Page 182: To Accelerate For Passing
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If the button is continually pressed, the set speed will To Decrease Speed continue to decrease until the button is released, then When the Electronic Speed Control is set, you can de- the new set speed will be established.
Page 183: Parkview® Rear Back Up Camera - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 After five seconds this note will disappear. The WARNING! ParkView® camera is located on the rear of the vehicle above the rear license plate. Electronic Speed Control can be dangerous where the system cannot maintain a constant speed. Your ve- When the vehicle is shifted out of REVERSE, the rear hicle could go too fast for the conditions, and you camera mode is exited and the last selected touchscreen...
Page 184 182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When displayed, static grid lines will illustrate the width that will help indicate the distance to the rear of the of the vehicle while a dashed center-line will indicate the vehicle. The following table shows the approximate center of the vehicle to assist with aligning to a hitch/ distances for each zone: receiver.
Page 185: Garage Door Opener - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 GARAGE DOOR OPENER — IF EQUIPPED CAUTION! HomeLink® replaces up to three hand-held transmitters • To avoid vehicle damage, ParkView® should only that operate devices such as garage door openers, motor- be used as a parking aid. The ParkView® camera is ized gates, lighting or home security systems.
Page 186 184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The HomeLink® buttons, located on either the overhead console, headliner or sunvisor, designate the three differ- ent HomeLink® channels. The HomeLink® indicator is located above the center button. HomeLink® Buttons/Sunvisor/Headliner NOTE: HomeLink® is disabled when the Vehicle Secu- rity Alarm is active.
Page 187: Before You Begin Programming Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 Before You Begin Programming HomeLink® NOTE: • Erasing all channels should only be performed when Be sure that your vehicle is parked outside of the garage before you begin programming. programming HomeLink® for the first time. Do not erase channels when programming additional buttons.
Page 188 186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink® button you wish to pro- gram while keeping the HomeLink® indicator light in view. 3. Simultaneously press and hold both the HomeLink® button you want to program and the hand-held trans- mitter button.
Page 189: Programming A Non-Rolling Code
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 Firmly press and release the “LEARN” or “TRAIN- Reprogramming A Single HomeLink® Button ING” button. On some garage door openers/devices To reprogram a channel that has been previously trained, there may be a light that blinks when the garage door follow these steps: opener/device is in the LEARN/TRAIN mode.
Page 190 188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • To program the two remaining HomeLink® buttons, 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink® button you wish to pro- repeat each step for each remaining button. DO NOT gram while keeping the HomeLink®...
Page 191: Canadian/Gate Operator Programming
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 Canadian/Gate Operator Programming 3. Continue to press and hold the HomeLink® button, while you press and release (“cycle”), your hand-held For programming transmitters in Canada/United States transmitter every two seconds until HomeLink® has that require the transmitter signals to “time-out”...
Page 192: Using Homelink
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If you unplugged the garage door opener/device for Using HomeLink® programming, plug it back in at this time. To operate, press and release the programmed HomeLink® button. Activation will now occur for the Reprogramming A Single HomeLink®...
Page 193: Troubleshooting Tips
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 The HomeLink® Universal Transceiver is disabled when WARNING! the Vehicle Security Alarm is active. Vehicle exhaust contains carbon monoxide, a danger- Troubleshooting Tips ous gas. Do not run your vehicle in the garage while If you are having trouble programming HomeLink®, programming the transceiver.
Page 194: General Information
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: WARNING! (Continued) • The transmitter has been tested and it complies with use a garage door opener without these safety fea- FCC and IC rules. Changes or modifications not ex- tures. Call toll-free 1–800–355–3515 or, on the Internet pressly approved by the party responsible for compli- at www.HomeLink.com for safety information or ance could void the user’s authority to operate the...
Page 195: Power Sunroof - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 POWER SUNROOF — IF EQUIPPED WARNING! The power sunroof switch is located on the overhead • Never leave children alone in a vehicle, or with console. access to an unlocked vehicle. Never leave the Key Fob in or near the vehicle, or in a location acces- sible to children.
Page 196: Opening Sunroof - Express
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof — Express position. The sunroof will close fully and stop automati- cally. This is called “Express Close”. During Express Press the switch rearward and release it within one-half Close operation, any movement of the switch will stop second.
Page 197: Venting Sunroof - Express
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 Venting Sunroof — Express open or partially open positions. This is a normal occur- rence and can be minimized. If the buffeting occurs with Press and release the Vent button within one half second the rear windows open, open the front and rear windows and the sunroof will open to the vent position.
Page 198: Electrical Power Outlets
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE For Vehicles Equipped With The EVIC The power sunroof switch will remain active for up to approximately ten minutes after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature.
Page 199 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 NOTE: To ensure proper operation a MOPAR® knob and element must be used. CAUTION! • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts. If the 160 Watt (13 Amp) power rating is exceeded the fuse protecting the system will need to be replaced.
Page 200 198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! • Many accessories that can be plugged in draw To avoid serious injury or death: • Only devices designed for use in this type of outlet power from the vehicle’s battery, even when not in should be inserted into any 12 Volt outlet.
Page 201: Power Inverter - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 POWER INVERTER — IF EQUIPPED A 115 Volt (150 Watt) AC power inverter is located on the front of the center console for added convenience. This outlet can power mobile phones, electronics and other low power devices requiring power up to 150 Watts.
Page 202 200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) CAUTION! (Continued) • Do not touch with wet hands. • Accessories that draw higher power (i.e., coolers, • Close the lid when not in use. vacuum cleaners, lights, etc.) will degrade the bat- •...
Page 203: Cupholders
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 CUPHOLDERS There are two cupholders located in the back for the rear passengers. Your vehicle is equipped with four cupholders. There are two illuminated cupholders located in the front. Rear Cupholders Front Cupholders...
Page 204: Storage
202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE STORAGE Glove Compartment And Storage Bin Located on the passenger side of the instrument panel are an upper storage bin and a lower glove compartment. Storage Bins 1 — Upper Storage Bin 2 — Lower Glove Compartment...
Page 205: Door Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 To open the lower glove compartment, pull outward on Door Storage the release handle. The interior door panels are equipped with lower storage areas. Glove Compartment Front Door Storage...
Page 206: Console Features
204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To open the upper storage compartment, push inward on the upper handle to unlatch the upper lid and lift the lid open. Rear Door Storage CONSOLE FEATURES The floor console contains both an upper and lower Upper Storage Compartment storage compartment.
Page 207: Cargo Area Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 To open the lower storage compartment, lift upward on WARNING! the lower handle to unlatch the lower storage compart- ment and lift the lid open. Do not operate this vehicle with a console compart- ment lid in the open position.
Page 208: Cargo Cover
206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press in on the flashlight to release it. Three Press Switch Cargo Cover Flashlight Location/Press To Release To operate the flashlight, press the switch once for high, The cargo area trim panels include two notches for twice for low, and a third time to return to off.
Page 209 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 To install the Cargo Cover, insert either end of the cover Using the handle, pull the cover toward you and guide into one of the two notches located in the rear trim the rear cover posts into the guides located on both sides panels.
Page 210: Removable Load Floor
208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! In a collision a cargo cover loose in the vehicle could cause injury. It could fly around in a sudden stop and strike someone in the vehicle. Do not store the cargo cover on the cargo floor or in the passenger compart- ment.
Page 211: Cargo Tie-Down Loops
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 Cargo Tie-Down Loops WARNING! There are four tie-downs (D-rings) installed in the cargo • Cargo tie-down loops are not safe anchors for a area for securing cargo. child seat tether strap. In a sudden stop or collision a loop could pull loose and allow the child seat to come loose.
Page 212: Fold Down Speakers - If Equipped
210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fold Down Speakers — If Equipped WARNING! (Continued) When the liftgate is open, the speakers can swing down • Place as much cargo as possible in front of the rear off the trim panel to face rearward, for tailgating and axle.
Page 213: Rear Window Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 REAR WINDOW FEATURES Rear Window Wiper/Washer The rear wiper/washer is controlled by a rotary switch located on the center portion of the control lever. The control lever is located on the right side of the steering column.
Page 214: Rear Window Defroster
212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The rear wiper operates in an intermittent mode Rear Window Defroster only. The rear window defroster button is located on Rotate the center portion of the lever past the the bottom right-side of the blower control knob. first detent to activate the rear washer.
Page 215: Roof Luggage Rack - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 ROOF LUGGAGE RACK — IF EQUIPPED CAUTION! The crossbars and siderails are designed to carry the Failure to follow these cautions can cause damage to cargo on vehicles equipped with a luggage rack. The load the heating elements: must not exceed 150 lbs (68 kg), and should be uniformly •...
Page 216 214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The grab handles on the back of the vehicle (if approximately eight turns, then move the crossbar to the desired position, keeping the crossbars perpendicular to equipped) are not to be used as a towing feature. the luggage rack side rails.
Page 217 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 CAUTION! (Continued) WARNING! • Long loads which extend over the windshield, such Cargo must be securely tied before driving your as wood panels or surfboards, or loads with large vehicle. Improperly secured loads can fly off the frontal area should be secured to both the front and vehicle, particularly at high speeds, resulting in per- rear of the vehicle.
Page 219 UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS ▫ Average Fuel Economy....242 INSTRUMENT PANEL FEATURES ..220 ▫ Distance To Empty (DTE) ....243 INSTRUMENT CLUSTER .
Page 220 218 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Operation Instructions — DISC Mode For CD And ▫ Operation Instructions — CD MODE For CD And MP3/WMA Audio Play, DVD – Video ..258 MP3 Audio Play ..... .274 ▫...
Page 221 UNDERSTANDING YOUR INSTRUMENT PANEL 219 ▫ Connecting The iPod® Or External USB ▫ CD Player ......305 Device .
Page 222: Instrument Panel Features
220 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 — Air Outlet 5 — Storage Bin 9 — Heated Seat Switch – If Equipped 2 — Demisters 6 — Glove Compartment 10 — Hazard Warning Flasher 3 — Instrument Cluster 7 —...
Page 223: Instrument Cluster
UNDERSTANDING YOUR INSTRUMENT PANEL 221 INSTRUMENT CLUSTER...
Page 224: Instrument Cluster Descriptions
222 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS If jump starting is required, refer to “Jump Starting Procedures” in “What To Do In Emergencies”. 1. Fuel Gauge /Fuel Door Reminder 3. Electronic Throttle Control (ETC) Light When the ignition switch is in the ON/RUN position, the pointer will show the level of fuel This light informs you of a problem with the remaining in the fuel tank.
Page 225 UNDERSTANDING YOUR INSTRUMENT PANEL 223 on briefly as a bulb check. If the light does not come on 6. Speedometer during starting, have the system checked by an autho- The Speedometer shows the vehicle speed in miles per rized dealer. hour (MPH) and kilometers per hour (km/h).
Page 226 224 UNDERSTANDING YOUR INSTRUMENT PANEL If the vehicle is driven more than 1 mile (1.6 km) with the conventional brake system will continue to operate either turn signal on, a continuous chime will sound to normally if the BRAKE warning light is not on. alert you to turn the signals off.
Page 227 UNDERSTANDING YOUR INSTRUMENT PANEL 225 12. Tachometer normal, turn the engine off immediately and call for service. Refer to “If Your Engine Overheats” in “What To The white area of the scale shows the permissible engine Do In Emergencies” for further information. revolutions-per-minute (RPM x 1000) for each gear range.
Page 228 226 UNDERSTANDING YOUR INSTRUMENT PANEL booster, the ABS pump will run when applying the brake WARNING! and a brake pedal pulsation may be felt during each stop. Driving a vehicle with the red brake light on is The dual brake system provides a reserve braking capac- dangerous.
Page 229 UNDERSTANDING YOUR INSTRUMENT PANEL 227 The light also will turn on when the parking brake is WARNING! applied with the ignition switch in the ON/RUN posi- tion. If you continue operating the vehicle when the Transmission Temperature Warning Light is illumi- NOTE: This light shows only that the parking brake is nated you could cause the fluid to boil over, come in applied.
Page 230 228 UNDERSTANDING YOUR INSTRUMENT PANEL The gauge pointer will likely indicate a higher tempera- WARNING! ture when driving in hot weather, up mountain grades, or when towing a trailer. It should not be allowed to A hot engine cooling system is dangerous. You or exceed the upper limits of the normal operating range.
Page 231 UNDERSTANDING YOUR INSTRUMENT PANEL 229 20. Shift Lever Indicator by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a The Shift Lever Indicator is self-contained within the different size than the size indicated on the vehicle instrument cluster.
Page 232 230 UNDERSTANDING YOUR INSTRUMENT PANEL maintain correct tire pressure, even if under-inflation has replacement or alternate tires and wheels allow the TPMS not reached the level to trigger illumination of the TPMS to continue to function properly. low tire pressure telltale. CAUTION! Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not...
Page 233 UNDERSTANDING YOUR INSTRUMENT PANEL 231 NOTE: U.S. Federal regulations require that upon trans- fer of vehicle ownership, the seller certify to the pur- gATE ......Gate Ajar chaser the correct mileage that the vehicle has been gASCAP .
Page 234 232 UNDERSTANDING YOUR INSTRUMENT PANEL gASCAP HOTOIL If the vehicle diagnostic system determines that the fuel When this message is displayed there is a engine over- filler cap is loose, improperly installed, or damaged, a temperature condition. When this condition occurs, the “gASCAP”...
Page 235 UNDERSTANDING YOUR INSTRUMENT PANEL 233 temporarily, press and release the Trip Odometer button monitors emissions, engine, and automatic transmission on the instrument cluster. To reset the oil change indica- control systems. The light will illuminate when the key is tor system (after performing the scheduled maintenance), in the ON/RUN position before engine start.
Page 236 234 UNDERSTANDING YOUR INSTRUMENT PANEL 26. Electronic Stability Control (ESC) OFF Indicator CAUTION! (Continued) Light — If Equipped converter damage and power loss will soon occur. This light indicates the Electronic Stability Con- Immediate service is required. trol system (ESC) has been turned off by the driver.
Page 237 UNDERSTANDING YOUR INSTRUMENT PANEL 235 (kilometers) at speeds greater than 30 mph (48 km/h), see 28. 4WD! Warning Light — If Equipped your authorized dealer as soon as possible to have the This light monitors the 4-Wheel Drive (4WD) problem diagnosed and corrected. system.
Page 238: Mini-Trip Computer - If Equipped
236 UNDERSTANDING YOUR INSTRUMENT PANEL 30. Hill Descent Indicator — If Equipped Control Buttons The symbol illuminates (is armed) when the 4WD Lock switch is activated and the trans- mission range indicator is in LOW or REVERSE position (Off-Road Mode). MINI-TRIP COMPUTER —...
Page 239 UNDERSTANDING YOUR INSTRUMENT PANEL 237 RESET Button Trip A To reset the display shown, turn the ignition switch to the Shows the total distance traveled for Trip A since the last ON position, then press and hold the RESET button reset.
Page 240: Electronic Vehicle Information Center (Evic) - If Equipped
238 UNDERSTANDING YOUR INSTRUMENT PANEL ELECTRONIC VEHICLE INFORMATION CENTER The EVIC consists of the following: (EVIC) — IF EQUIPPED • System Status The Electronic Vehicle Information Center (EVIC) fea- • Units tures a driver-interactive display that is located in the •...
Page 241 UNDERSTANDING YOUR INSTRUMENT PANEL 239 The system allows the driver to select information by MENU Button pressing the following buttons mounted on the steering Press and release the MENU button to scroll wheel: through the main menus (Fuel Economy, Warn- ings, Timer, Units, System, Personal Settings) or to exit sub-menus.
Page 242 240 UNDERSTANDING YOUR INSTRUMENT PANEL • Personal Settings Not Avail. — Vehicle not in PARK DOWN Button (automatic transmission) or vehicle is in motion Press and release the DOWN button to scroll (manual transmission). downward through the sub-menus. • Door Ajar (with vehicle graphic showing which door is open.
Page 243: Engine Oil Change Indicator System - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 241 • Remote Start Aborted — Fuel Low indicator system is duty-cycle based, which means the engine oil change interval may fluctuate dependent upon • Remote Start Aborted — System Fault your personal driving style. • Key In Ignition Unless reset, this message will continue to display each •...
Page 244: Evic Functions
242 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If the indicator message illuminates when you occur if a resettable function is currently being displayed. start the vehicle, the oil change indicator system did not To reset all resettable functions, press and release the reset.
Page 245: Distance To Empty (Dte)
UNDERSTANDING YOUR INSTRUMENT PANEL 243 history information will be erased, and the averaging will LOW FUEL text and a new DTE value will be dis- continue from the last fuel reading before the reset. played, based on the current values in the DTE calcula- tion and the current fuel tank level.
Page 246: Display Units Of Measure In
244 UNDERSTANDING YOUR INSTRUMENT PANEL reset all digits will change to zeros and time will start Language incrementing again if the ignition switch is in RUN or When in this display you may select different languages START. for all display nomenclature, including the trip functions. Pressing the SELECT button while in this display selects Display Units Of Measure In English, Espanol, Deutsch, Italiano, Francais or NL de-...
Page 247 UNDERSTANDING YOUR INSTRUMENT PANEL 245 Auto Unlock On Exit Flash Lamps With Lock When ON is selected, all the vehicle’s doors will unlock When ON is selected, the front and rear turn signals will when the driver’s door is opened, if the vehicle is flash when the doors are locked or unlocked using the stopped (manual transmission) or the vehicle is stopped RKE transmitter.
Page 248 246 UNDERSTANDING YOUR INSTRUMENT PANEL when exiting the vehicle. Press and hold the SELECT SELECT button when in this display until “OFF”, “30 button when in this display until 0, 30, 60, or 90 appears sec.”, “60 sec.”, or “90 sec.” appears to make your to make your selection.
Page 249 UNDERSTANDING YOUR INSTRUMENT PANEL 247 Automatic Compass Calibration 1. Start the engine. Leave the shift lever in PARK in order to enter the EVIC Programming Menus. This compass is self-calibrating, which eliminates the need to set the compass manually. When the vehicle is 2.
Page 250 248 UNDERSTANDING YOUR INSTRUMENT PANEL Compass Variance Compass Variance is the difference between Magnetic North and Geographic North. To compensate for the differences, the variance should be set for the zone where the vehicle is driven, per the zone map. Once properly set, the compass will automatically compensate for the differences and provide the most accurate compass head- ing.
Page 251: Uconnect® 230 - Am/Fm Stereo Radio And 6-Disc Cd/Dvd Changer
UNDERSTANDING YOUR INSTRUMENT PANEL 249 3. Press the DOWN button until “Compass Variance” Uconnect® 230 – AM/FM STEREO RADIO AND message and the last variance zone number displays 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) in the EVIC. 4. Press and release the SELECT button until the proper variance zone is selected according to the map.
Page 252: Understanding Your Instrument Panel
250 UNDERSTANDING YOUR INSTRUMENT PANEL Power Switch/Volume Control (Rotary) another selection. Holding either button will bypass stations without stopping, until you release it. Push the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME control knob a second SCAN Button time to turn off the radio.
Page 253 UNDERSTANDING YOUR INSTRUMENT PANEL 251 Phone Button Uconnect® Phone — If Equipped 3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes Press this button to operate the Uconnect® Phone feature will begin to blink.
Page 254 252 UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display. Turn the TUNE/SCROLL Pressing the RW (Rewind) or FF (Fast Forward) buttons control knob to the right or left to increase or decrease the causes the tuner to search for the next frequency in the treble tones.
Page 255 UNDERSTANDING YOUR INSTRUMENT PANEL 253 or turning the TUNE/SCROLL control knob within five 16-Digit Character Dis- Program Type seconds will allow the program format type to be se- play lected. Many radio stations do not currently broadcast Information Inform Music Type information. Jazz Jazz Toggle the MUSIC TYPE button to select the following...
Page 256 254 UNDERSTANDING YOUR INSTRUMENT PANEL SETUP Button 16-Digit Character Dis- Program Type play Pressing the SETUP button allows you to select between the following items: Sports Sports Talk Talk NOTE: Turn the TUNE/SCROLL control knob to scroll Top 40 Top 40 through the entries.
Page 257 UNDERSTANDING YOUR INSTRUMENT PANEL 255 • DVD Play Options — Selecting the DVD Play Options • VES™ Power — Allows you to turn VES™ ON and will display the following: OFF (if equipped). • Subtitle — Repeatedly pressing SELECT will switch •...
Page 258 256 UNDERSTANDING YOUR INSTRUMENT PANEL Menu Language — If Equipped Subtitle Language — If Equipped Selecting this item will allow the user to choose the Selecting this item allows you to choose a default subtitle default startup DVD menu language (effective only if language (effective only if the language is supported by language supported by disc).
Page 259 UNDERSTANDING YOUR INSTRUMENT PANEL 257 Aspect Ratio — If Equipped SET Button — To Set The Pushbutton Memory When you are receiving a station that you wish to Selecting this item allows you to choose between wide commit to pushbutton memory, press the SET button. screen, pan scan, and letter box.
Page 260: Operation Instructions - Disc Mode For Cd And Mp3/Wma Audio Play, Dvd - Video
258 UNDERSTANDING YOUR INSTRUMENT PANEL Every time a preset button is used, a corresponding to an authorized dealer to change the region code of the button number will display. player a maximum of five times. Buttons 1 - 6 CAUTION! These buttons tune the radio to the stations that you The radio may shut down during extremely hot commit to pushbutton memory {12 AM, 12 FM, and 12...
Page 261 UNDERSTANDING YOUR INSTRUMENT PANEL 259 prompt when to INSERT DISC. After the radio displays display will show EJECTING DISC when the disc is INSERT DISC, insert the CD into the player. being ejected and prompt the user to remove the disc. Radio display will show LOADING DISC when the disc Press and hold the EJECT button for five seconds and all is loading and “READING DISC”...
Page 262 260 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button (CD MODE) Supported Media (Disc Types) Press this button to change the display from a large CD The MP3/WMA file recording media supported by the playing time display to a small CD playing time display. radio are CDDA, CD-R, CD-RW, MP3,WMA, DVD Video, DVD-R, DVD-RW, DVD+R, DVD+RW, and CDDA+MP3.
Page 263 UNDERSTANDING YOUR INSTRUMENT PANEL 261 • Maximum number of characters in file/folder names: Supported MP3/WMA File Formats • Level 1: 12 (including a separator . and a three- The radio will recognize only files with the *.MP3/WMA character extension) extension as MP3/WMA files. Non-MP3/WMA files •...
Page 264 262 UNDERSTANDING YOUR INSTRUMENT PANEL Playlist files are not supported. MP3 Pro files are not MPEG Specifi- Sampling Fre- Bit Rate (kbps) supported. cation quency (kHz) MPEG-1 Audio 48, 44.1, 32 320, 256, 224, Playback Of MP3/WMA Files Layer 3 192, 160, 128, When a medium containing MP3/WMA data is loaded, 112, 96, 80, 64,...
Page 265: List Button - Disc Mode For Mp3/Wma Play
UNDERSTANDING YOUR INSTRUMENT PANEL 263 To increase the speed of disc loading, it is recommended Press the INFO button once more to return to elapsed to use CD-R media and single-session discs. To create a time priority mode. single-session disc, enable the “Disc at Once” option Press and hold the INFO button for three seconds or before writing to the disc.
Page 266 264 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The AUX device must be turned on and the TIME Button (Auxiliary Mode) device’s volume set to the proper level. If the AUX audio Press the TIME button to change the display from is not loud enough, turn the device’s volume up. If the elapsed playing time to time of day.
Page 267: Uconnect® (Satellite Radio) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 265 Operating Instructions — Video Entertainment DTS™ System (VES™) (If Equipped) “DTS™ and “DTS™ 2.0” are trademarks of Digital The- Refer to “Video Entertainment System (VES™)” for fur- ater Systems, Inc. ther details. Uconnect® (Satellite Radio) — If Equipped Dolby®...
Page 268 266 UNDERSTANDING YOUR INSTRUMENT PANEL radio system in your vehicle. Sirius will supply a wel- ESN/SID Access come kit that contains general information, including With the ignition switch in the ON/RUN or ACC posi- how to setup your on-line listening account. For further tion and the radio on, press the SETUP button and scroll information, call the toll-free number 888-539-7474, or using the TUNE/SCROLL control knob until Sirius ID is...
Page 269 UNDERSTANDING YOUR INSTRUMENT PANEL 267 bikes should be placed as far rearward as possible, within Operating Instructions — Uconnect® (Satellite) the loading design of the rack. Do not place items directly Mode on or above the antenna. NOTE: The ignition switch must be in the ON/RUN or Reception Quality ACC position to operate the radio.
Page 270 268 UNDERSTANDING YOUR INSTRUMENT PANEL INFO Button MUSIC TYPE Button Pressing the INFO button will cycle the display informa- Pressing this button once will turn on the Music Type tion between Artist, Song Title, and Composer (if avail- mode for five seconds. Pressing the MUSIC TYPE button able).
Page 271 UNDERSTANDING YOUR INSTRUMENT PANEL 269 SETUP Button You may add a second station to each pushbutton by repeating the above procedure with this exception: Press Pressing the SETUP button allows you to select the the SET/RND button twice and SET 2 will show in the following items: display window.
Page 272: If Equipped
270 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect® 730N/430/430N CD/DVD/HDD/NAV — Uconnect® 130 IF EQUIPPED Refer to your Uconnect® Supplement Manual for de- tailed operating instructions. Operating Instructions (Voice Command System) — If Equipped Refer to “Voice Command” for further details. Operating Instructions (Uconnect® Phone) — If Equipped Refer to “Uconnect®...
Page 273 UNDERSTANDING YOUR INSTRUMENT PANEL 271 Power Switch/Volume Control (Rotary) another selection. Holding either button will bypass stations without stopping, until you release it. Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second TIME Button time to turn off the radio.
Page 274 272 UNDERSTANDING YOUR INSTRUMENT PANEL 5. To exit, press any button/knob, or wait five seconds. Push the rotary TUNE/SCROLL control knob a second time and MID will display. Turn the TUNE/SCROLL RW/FF control knob to the right or left to increase or decrease the Pressing the RW (Rewind) or FF (Fast Forward) buttons mid-range tones.
Page 275 UNDERSTANDING YOUR INSTRUMENT PANEL 273 Push the rotary TUNE/SCROLL control knob again to display window. Each button can be set for SET 1 and exit setting tone, balance, and fade. SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory.
Page 276: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
274 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions — CD MODE For CD And If you insert a disc with the ignition ON and the radio MP3 Audio Play ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will NOTE: show the track number, and index time in minutes and •...
Page 277 UNDERSTANDING YOUR INSTRUMENT PANEL 275 SEEK Button CAUTION! (Continued) Press the right SEEK button for the next selection on the • Dual-media disc types (one side is a DVD, the CD. Press the left SEEK button to return to the beginning other side is a CD) should not be used, and they can of the current selection, or return to the beginning of the cause damage to the player.
Page 278: Notes On Playing Mp3 Files
276 UNDERSTANDING YOUR INSTRUMENT PANEL AM/FM Button Notes On Playing MP3 Files Press the button to select either AM or FM mode. The radio can play MP3 files; however, acceptable MP3 file recording media and formats are limited. When SET/RND Button (Random Play Button) writing MP3 files, pay attention to the following restric- Press this button while the CD is playing to activate tions.
Page 279 UNDERSTANDING YOUR INSTRUMENT PANEL 277 The radio uses the following limits for file systems: Multi-session disc formats are supported by the radio. Multi-session discs may contain combinations of normal • Maximum number of folder levels: 8 CD audio tracks and computer files (including MP3 files). •...
Page 280 278 UNDERSTANDING YOUR INSTRUMENT PANEL use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or Playback Of MP3 Files VBR bit rate. When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium MPEG Specifi- Sampling Fre- Bit Rate (kbps)
Page 281: Operation Instructions - Auxiliary Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 279 To increase the speed of disc loading, it is recommended Pressing the DISC/AUX button will change the mode to to use CD-R media and single-session discs. To create a auxiliary device if the AUX jack is connected. single-session disc, enable the “Disc at Once”...
Page 282: Uconnect® 130 With Satellite Radio
280 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect® 130 WITH SATELLITE RADIO Power Switch/Volume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio. Electronic Volume Control The electronic volume control turns continuously (360 degrees) in either direction, without stopping.
Page 283 UNDERSTANDING YOUR INSTRUMENT PANEL 281 another selection. Holding either button will bypass Phone Button Uconnect® Phone — If Equipped stations without stopping, until you release it. Press this button to operate the Uconnect® Phone feature (if equipped). Refer to “Uconnect® Phone” in “Under- Voice Command System (Radio) —...
Page 284 282 UNDERSTANDING YOUR INSTRUMENT PANEL 3. After adjusting the hours, press the right side TUNE/ INFO Button SCROLL control knob to set the minutes. The minutes Press the INFO button for an RDS station (one with call will begin to blink. letters displayed).
Page 285 UNDERSTANDING YOUR INSTRUMENT PANEL 283 Setting The Tone, Balance And Fade Push the rotary TUNE/SCROLL control knob a fifth time and FADE will display. Turn the TUNE/SCROLL control Push the rotary TUNE/SCROLL control knob and BASS knob to the left or right to adjust the sound level between will display.
Page 286 284 UNDERSTANDING YOUR INSTRUMENT PANEL Toggle the MUSIC TYPE button to select the following 16-Digit Character Dis- Program Type format types: play Oldies Oldies 16-Digit Character Dis- Program Type Personality Persnlty play Public Public No program type or un- None defined Rhythm and Blues R &...
Page 287 UNDERSTANDING YOUR INSTRUMENT PANEL 285 By pressing the SEEK button when the Music Type icon the minutes using the right side TUNE/SCROLL con- is displayed, the radio will be tuned to the next frequency trol knob. Press the TUNE/SCROLL control knob to station with the same selected Music Type name.
Page 288: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
286 UNDERSTANDING YOUR INSTRUMENT PANEL You may add a second station to each pushbutton by Operation Instructions — CD MODE For CD And repeating the above procedure with this exception: Press MP3 Audio Play the SET/RND button twice and SET 2 will show in the NOTE: display window.
Page 289 UNDERSTANDING YOUR INSTRUMENT PANEL 287 If you insert a disc with the ignition ON and the radio CAUTION! (Continued) ON, the unit will switch from radio to CD mode and • Dual-media disc types (one side is a DVD, the begin to play when you insert the disc.
Page 290: Notes On Playing Mp3 Files
288 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Button AM/FM Button Press the right SEEK button for the next selection on the Press the button to select either AM or FM mode. CD. Press the left SEEK button to return to the beginning SET/RND Button (Random Play Button) of the current selection, or return to the beginning of the Press this button while the CD is playing to activate...
Page 291 UNDERSTANDING YOUR INSTRUMENT PANEL 289 Supported Media (Disc Types) display the file name and folder name, and will assign a number instead. With a maximum number of files, The MP3 file recording media supported by the radio are exceeding 20 folders will result in this display. With CDDA, CD-R, CD-RW, MP3, and CDDA+MP3.
Page 292 290 UNDERSTANDING YOUR INSTRUMENT PANEL Supported MP3 File Formats MPEG Specifi- Sampling Fre- Bit Rate (kbps) cation quency (kHz) The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 MPEG-1 Audio 48, 44.1, 32 320, 256, 224, extension may cause playback problems.
Page 293: List Button - Cd Mode For Mp3 Play
UNDERSTANDING YOUR INSTRUMENT PANEL 291 Playback Of MP3 Files To increase the speed of disc loading, it is recommended to use CD-R media and single-session discs. To create a When a medium containing MP3 data is loaded, the single-session disc, enable the “Disc at Once” option radio checks all files on the medium.
Page 294: Info Button - Cd Mode For Mp3 Play
292 UNDERSTANDING YOUR INSTRUMENT PANEL INFO Button — CD Mode For MP3 Play Pressing the AUX button will change the mode to auxil- iary device if the AUX jack is connected. Pressing the INFO button repeatedly will scroll through the following TAG information: Song Title, Artist, File NOTE: The AUX device must be turned on and the Name, and Folder Name (if available).
Page 295 UNDERSTANDING YOUR INSTRUMENT PANEL 293 sports, news, entertainment, and programming for chil- Electronic Serial Number/Sirius Identification dren, directly from its satellites and broadcasting studios. Number (ESN/SID) Please have the following information available when NOTE: Sirius service is not available in Hawaii and has calling: limited coverage in Alaska.
Page 296 294 UNDERSTANDING YOUR INSTRUMENT PANEL • Dense tree coverage may interrupt reception in the Selecting Uconnect® (Satellite) Mode form of short audio mutes. Press the SAT button until SAT appears in the display. A • Driving under wide bridges or along tall buildings can CD may remain in the radio while in the Satellite radio mode.
Page 297 UNDERSTANDING YOUR INSTRUMENT PANEL 295 remain tuned to the new channel until you make another RW/FF selection. Holding either button will bypass channels Pressing the RW (Rewind) or FF (Fast Forward) buttons without stopping until you release it. causes the tuner to search for the next channel in the direction of the arrows.
Page 298 296 UNDERSTANDING YOUR INSTRUMENT PANEL By pressing the SEEK button when the Music Type Select the button (1-6) you wish to lock onto this channel function is active, the radio will be tuned to the next and press and release that button. If a button is not channel with the same selected Music Type name.
Page 299: Ipod®/Usb/Mp3 Control - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 297 Buttons 1 - 6 NOTE: • If the radio has a USB port, refer to the appropriate These buttons tune the radio to the channels that you commit to pushbutton memory (12 Satellite stations). Uconnect® Multimedia radio User’s Manual for iPod®...
Page 300: Using This Feature
298 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If the audio device battery is completely dis- charged, it may not communicate with the iPod®/USB/ MP3 control system until a minimum charge is attained. Leaving the audio device connected to the iPod®/USB/ MP3 control system may charge it to the required level. Using This Feature By using an iPod®...
Page 301: Controlling The Ipod® Or External Usb Device
UNDERSTANDING YOUR INSTRUMENT PANEL 299 • Turning it clockwise (forward) by one click, while Controlling The iPod® Or External USB Device Using Radio Buttons playing a track, skips to the next track or press the VR button and say Next Track. To get into the iPod®/USB/MP3 control mode and •...
Page 302: List Or Browse Mode
300 UNDERSTANDING YOUR INSTRUMENT PANEL during play mode will jump to the next track in the SCAN button again. During Scan mode, pressing the list, or press the VR button and say Next or Previous << SEEK and SEEK >> buttons will select the previous Track.
Page 303 UNDERSTANDING YOUR INSTRUMENT PANEL 301 • Turning it clockwise (forward) and counterclockwise • Preset 2 – Artists (backward) scrolls through the lists, displaying the • Preset 3 – Albums track detail on the radio display. Once the track to be •...
Page 304: Bluetooth® Streaming Audio (Btsa)
302 UNDERSTANDING YOUR INSTRUMENT PANEL device, then follow the same steps to go to the desired WARNING! track in that list. Not all iPod® or external USB device sub-menu levels are available on this system. Do not plug in or remove the iPod® or external USB device while driving.
Page 305: Steering Wheel Audio Controls
UNDERSTANDING YOUR INSTRUMENT PANEL 303 device first, then it will get streamed to the Uconnect® Previous Track phone system. Seven devices can be paired to the Use the SEEK DOWN button, or press the VR button on Uconnect® phone system, but just one can be selected the radio and say “Previous Track,”...
Page 306: Radio Operation
304 UNDERSTANDING YOUR INSTRUMENT PANEL Pressing the center button will make the radio switch between the various modes available (AM/FM/SAT/ CD/HDD/AUX/VES, etc.). The left-hand control is a rocker-type switch with a pushbutton in the center. The function of the left-hand control is different depending on which mode you are in.
Page 307: Cd Player
UNDERSTANDING YOUR INSTRUMENT PANEL 305 CD Player CD/DVD DISC MAINTENANCE Pressing the top of the switch once will go to the next To keep a CD/DVD in good condition, take the following track on the CD. Pressing the bottom of the switch once precautions: will go to the beginning of the current track, or to the 1.
Page 308: Radio Operation And Mobile Phones
306 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If you experience difficulty in playing a particular not satisfactorily “clear” by the repositioning of the disc, it may be damaged (e.g., scratched, reflective coat- antenna, it is recommended that the radio volume be ing removed, a hair, moisture or dew on the disc) turned down or off during mobile phone operation when oversized, or have protection encoding.
Page 309: Manual Heating And Air Conditioning
UNDERSTANDING YOUR INSTRUMENT PANEL 307 Manual Heating And Air Conditioning Blower Control Rotate this control to regulate the amount of air forced through the ven- tilation system in any mode. The blower speed increases as you move the control to the right from the “O” (OFF) position.
Page 310 308 UNDERSTANDING YOUR INSTRUMENT PANEL Temperature Control Mode Control (Air Direction) Rotate this control to choose from sev- Rotate this control to regulate the tem- eral patterns of air distribution. You perature of the air inside the passenger can select either a primary mode as compartment.
Page 311 UNDERSTANDING YOUR INSTRUMENT PANEL 309 • Bi-Level windshield. This setting is good for maintaining comfort while reducing moisture on the windshield. Air is directed through the panel and floor outlets. • Defrost Air is directed through the windshield and side NOTE: For all settings, except full cold or full hot, there window demist outlets.
Page 312 310 UNDERSTANDING YOUR INSTRUMENT PANEL • Recirculation Control • The A/C will engage automatically to prevent fogging when the recirculation button is pressed and the mode Pressing the Recirculation Control button will control is set to panel or panel / floor. put the system in recirculation mode.
Page 313: Automatic Temperature Control (Atc) - If
UNDERSTANDING YOUR INSTRUMENT PANEL 311 NOTE: The air conditioning compressor will not engage until the engine has been running for about 10 seconds. • MAX A/C For maximum cooling use the A/C and recirculation buttons at the same time. • ECONOMY MODE If economy mode is desired, press the A/C button to turn OFF the indicator light and the A/C compressor.
Page 314 312 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The AUTO position performs best for front seat The recommended setting for maximum comfort for the occupants only. average person is 72°F (22°C); however, this may vary. NOTE: • The temperature setting can be adjusted at anytime 2.
Page 315 UNDERSTANDING YOUR INSTRUMENT PANEL 313 Blower Control Manual Operation Override This system offers a full complement of manual override For full automatic operation or for features, which consist of Blower Preferred Automatic, automatic blower operation, turn the Mode Preferred Automatic, or Blower and Mode Pre- blower knob to the AUTO position.
Page 316 314 UNDERSTANDING YOUR INSTRUMENT PANEL...
Page 317 UNDERSTANDING YOUR INSTRUMENT PANEL 315 • Floor The operator can override the AUTO mode setting to change airflow distribution by rotating the Mode Control Air is directed through the floor outlets with a knob (on the right) to one of the following positions. small amount flowing through the defrost and •...
Page 318 316 UNDERSTANDING YOUR INSTRUMENT PANEL • Air Conditioner Control NOTE: • When the ignition switch is turned to the LOCK Press this button to turn on the air conditioning during manual operation position, the recirculation feature will be cancelled. only. When the air conditioning is •...
Page 319: Operating Tips
UNDERSTANDING YOUR INSTRUMENT PANEL 317 • Most of the time, when in Automatic Operation, you Summer Operation can temporarily put the system into Recirculation The engine cooling system must be protected with a Mode by pressing the Recirculation button. However, high-quality antifreeze coolant to provide proper corro- under certain conditions, while in Automatic Mode, sion protection and to protect against engine overheating.
Page 320 318 UNDERSTANDING YOUR INSTRUMENT PANEL fresh air and high blower settings. This will ensure FLOOR, MIX, or DEFROST mode. The air is directed at adequate system lubrication to minimize the possibility the area of the windows through which you view the of compressor damage when the system is started again.
Page 321 UNDERSTANDING YOUR INSTRUMENT PANEL 319 Control Setting Suggestions For Various Weather Conditions...
Page 323 STARTING AND OPERATING CONTENTS ▫ Five-Speed Manual Transmission...329 STARTING PROCEDURES ....326 ▫ Manual Transmission — If Equipped ..326 ▫...
Page 324 322 STARTING AND OPERATING ▫ After Driving Off-Road ....360 AUTOSTICK® (SIX-SPEED AUTOMATIC TRANSMISSION) — IF EQUIPPED ..347 POWER STEERING .
Page 325 STARTING AND OPERATING 323 ▫ Electronic Stability Control (ESC) ..375 ▫ All Season Tires — If Equipped... .396 ▫ ESC Activation/Malfunction Indicator Light And ▫...
Page 326 324 STARTING AND OPERATING ▫ Fuel System Cautions....417 TIRE ROTATION RECOMMENDATIONS ..403 ▫ Carbon Monoxide Warnings ... . .418 TIRE PRESSURE MONITORING SYSTEM (TPMS) .
Page 327 STARTING AND OPERATING 325 ▫ Towing Requirements ....429 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) ....437 ▫...
Page 328: Starting Procedures
326 STARTING AND OPERATING STARTING PROCEDURES WARNING! (Continued) Before starting your vehicle, adjust your seat, adjust both • Do not leave the Key Fob in or near the vehicle, or inside and outside mirrors, and fasten your seat belts. in a location accessible to children. A child could operate power windows, other controls, or move WARNING! the vehicle.
Page 329: Automatic Transmission - If Equipped
STARTING AND OPERATING 327 Automatic Transmission — If Equipped Normal Starting The shift lever must be in the PARK or NEUTRAL Normal starting of either a cold or a warm engine does position before you can start the engine. Depress the not require pumping or pressing the accelerator pedal.
Page 330: Extreme Cold Weather (Below -20°F Or −29°C)
328 STARTING AND OPERATING in the ON position, release the accelerator pedal and WARNING! (Continued) repeat the “Normal Starting” procedure. another vehicle. This type of start can be dangerous if done improperly, so follow the procedure carefully. WARNING! Refer to “Jump Starting” in “What To Do In Emer- Never pour fuel or other flammable liquid into the gencies”...
Page 331: Engine Block Heater - If Equipped
STARTING AND OPERATING 329 ENGINE BLOCK HEATER — IF EQUIPPED MANUAL TRANSMISSION — IF EQUIPPED The engine block heater warms the engine, and permits Five-Speed Manual Transmission quicker starts in cold weather. Connect the cord to a standard 110-115 Volt AC electrical outlet with a WARNING! grounded, three-wire extension cord.
Page 332 330 STARTING AND OPERATING CAUTION! • Launching in any gear except 1st gear will result in excessive slipping of the clutch and potentially lugging or stalling the engine. • Use each gear in numerical order, do not skip a gear. Be sure the transmission is in first gear, (not third), when starting from a standing position.
Page 333: Recommended Shift Speeds
STARTING AND OPERATING 331 Never shift into REVERSE until the vehicle has come to a Recommended Shift Speeds complete stop. To use your manual transmission for optimal fuel economy, it should be upshifted as listed in the following NOTE: During cold weather, until the transmission lu- table.
Page 334: Downshifting
332 STARTING AND OPERATING Downshifting When turning a corner or driving up a steep grade, downshift early so that the engine will not be overbur- Proper downshifting will improve fuel economy and dened. prolong engine life. AUTOMATIC TRANSMISSION — IF EQUIPPED CAUTION! CAUTION! If you skip a gear while downshifting or downshift...
Page 335 STARTING AND OPERATING 333 NOTE: You must press and hold the brake pedal while WARNING! (Continued) shifting out of PARK. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. WARNING! • Allowing children to be in a vehicle unattended is •...
Page 336: Key Ignition Park Interlock
334 STARTING AND OPERATING NOTE: If a malfunction occurs, the system will trap the WARNING! (Continued) key in the ignition switch to warn you that this safety • It is dangerous to shift out of PARK or NEUTRAL feature is inoperable. The engine can be started and if the engine speed is higher than idle speed.
Page 337 STARTING AND OPERATING 335 out of PARK (refer to “Brake/Transmission Shift Inter- left or right (-/+) while in the DRIVE position will manu- lock System” in this section). To drive, move the shift ally select the transmission gear, and will display the lever from PARK or NEUTRAL to the DRIVE position.
Page 338 336 STARTING AND OPERATING When parking on a level surface, you may shift the WARNING! (Continued) transmission into PARK first, and then apply the parking • Your vehicle could move and injure you and others brake. if it is not completely in PARK. Check by trying to When parking on a hill, apply the parking brake before move the shift lever out of PARK with the brake shifting the transmission to PARK, otherwise the load on...
Page 339 STARTING AND OPERATING 337 WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure • Allowing children to be in a vehicle unattended is those in or near the vehicle. As with all vehicles, dangerous for a number of reasons. A child or you should never exit a vehicle while the engine is others could be seriously or fatally injured.
Page 340 338 STARTING AND OPERATING • Look at the transmission gear position display and CAUTION! verify that it indicates the PARK position. • Before moving the shift lever out of PARK, you • With brake pedal released, verify that the shift lever must turn the ignition switch from the LOCK/OFF will not move out of PARK.
Page 341 STARTING AND OPERATING 339 NOTE: Do not coast in NEUTRAL and never turn off the automatically upshifts through underdrive first, second, ignition to coast down a hill. These are unsafe practices third, and fourth gears, direct fifth gear and overdrive that limit your response to changing traffic or road sixth gear.
Page 342 340 STARTING AND OPERATING transmission becomes extremely hot, the “Transmission illuminated. Limp Home Mode allows the vehicle to be Temperature Warning Light” may illuminate and the driven to an authorized dealer for service without dam- transmission may operate differently until the transmis- aging the transmission.
Page 343 STARTING AND OPERATING 341 • The engine coolant has reached an adequate tempera- NOTE: Even if the transmission can be reset, we recom- mend that you visit your authorized dealer at your ture. earliest possible convenience. Your authorized dealer has •...
Page 344: Continuously Variable Automatic Transmission (Cvt) - If Equipped
342 STARTING AND OPERATING NOTE: Engagement of the torque converter clutch is NOTE: The Continuously Variable Automatic Transmis- inhibited at very cold temperatures. Because the engine sion (CVT) changes ratios in a continuous manner. This speed is higher when the torque converter clutch is not may sometimes feel as if it is slipping, but this is normal engaged, it may seem as if the transmission is not shifting and does not harm anything.
Page 345 STARTING AND OPERATING 343 Gear Ranges the transmission locking mechanism may make it diffi- cult to move the shift lever out of PARK. As an added DO NOT race the engine when shifting from PARK or precaution, turn the front wheels toward the curb on a NEUTRAL into another gear range.
Page 346 344 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • It is dangerous to shift out of PARK or NEUTRAL • Unintended movement of a vehicle could injure if the engine speed is higher than idle speed. If those in or near the vehicle. As with all vehicles, your foot is not firmly pressing the brake pedal, the you should never exit a vehicle while the engine is vehicle could accelerate quickly forward or in re-...
Page 347 STARTING AND OPERATING 345 WARNING! (Continued) CAUTION! • Allowing children to be in a vehicle unattended is • Before moving the shift lever out of PARK, you dangerous for a number of reasons. A child or must turn the ignition switch from the LOCK/OFF others could be seriously or fatally injured.
Page 348 346 STARTING AND OPERATING • Look at the transmission gear position display and NOTE: Do not coast in NEUTRAL and never turn off the verify that it indicates the PARK position. ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road •...
Page 349: Autostick® (Six-Speed Automatic Transmission) - If Equipped
STARTING AND OPERATING 347 DRIVE (D) slow slightly until the transmission cools down enough to allow a return to the requested speed. This is done to This range should be used for most city and highway prevent transmission damage due to overheating. If the driving.
Page 350: Operation
348 STARTING AND OPERATING system can also provide you with more control during condition would result. It will remain in the selected gear passing, city driving, cold slippery conditions, mountain until another upshift or downshift is chosen, except as driving, trailer towing, and many other situations. described below: •...
Page 351: Autostick® (Cvt) - If Equipped
STARTING AND OPERATING 349 • If a requested downshift would cause the engine to WARNING! overspeed, that shift will not occur. Do not downshift for additional engine braking on a • Avoid using speed control when AutoStick® is en- slippery surface. The drive wheels could lose their gaged.
Page 352: Operation
350 STARTING AND OPERATING • The transmission will automatically upshift when nec- Operation essary to prevent engine over-speed. NOTE: AutoStick® is not available until the CVT warms • The transmission will automatically downshift as the up in cold weather. vehicle slows (to prevent engine lugging) and will When the shift lever is in the DRIVE position, AutoStick®...
Page 353: Four-Wheel Drive Operation - If
STARTING AND OPERATING 351 To disengage AutoStick® mode, hold the shift lever to the right (+) until “D” is once again displayed in the instru- ment cluster. You can shift in or out of the AutoStick® mode at any time without taking your foot off the accelerator pedal.
Page 354: On-Road Driving Tips
352 STARTING AND OPERATING cluster. This can be done on the fly, at any vehicle speed. low-slung sports cars are designed to perform satisfacto- To deactivate, simply pull on the switch one more time. rily in off-road conditions. If at all possible, avoid sharp The “4WD Indicator Light”...
Page 355: When To Use Low (L Off-Road) With The 4Wd
STARTING AND OPERATING 353 safe and what is not. When on a trail, you should always When To Use Low (L Off-Road) With The 4WD be looking ahead for surface obstacles and changes in Lock Lever Engaged terrain. The key is to plan your future driving route while When driving off-road, shift into low (L Off-Road) and remembering what you are currently driving over.
Page 356: Driving In Snow, Mud And Sand
354 STARTING AND OPERATING Driving In Snow, Mud And Sand while still applying throttle. This will allow the tires to get a fresh bite and help maintain your momentum. There is a drastic reduction in traction when driving in snow, mud or sand. The vehicle will be less responsive to CAUTION! steering, acceleration and braking inputs.
Page 357: Hill Climbing
STARTING AND OPERATING 355 any mud hole, get out and determine how deep it is, if surfaces. Be sure you have a way to reinflate the tires there are any hidden obstacles and if the vehicle can be prior to reducing the pressure. safely recovered if stuck.
Page 358 356 STARTING AND OPERATING Before Climbing A Steep Hill the front end begins to bounce, ease off the throttle slightly to bring all four tires back on the ground. As you As you approach a hill consider its grade or steepness. approach the crest of the hill, ease off the throttle and Determine if it is too steep.
Page 359 STARTING AND OPERATING 357 Driving Down Hill Driving Across An Incline Before driving down a steep hill you need to determine if If at all possible avoid driving across an incline. If it is it is too steep for a safe descent. What is the surface necessary, know your vehicle’s abilities.
Page 360: Driving Through Water
358 STARTING AND OPERATING and hill descent braking to control the descent and apply be attempted when necessary in a safe responsible man- your brakes if necessary, but do not allow the tires to lock. ner. You should only drive through areas which are designated and approved.
Page 361 STARTING AND OPERATING 359 soft bottoms, the vehicle will sink in, effectively increas- CAUTION! ing the water level on the vehicle. Be sure to consider this when determining the depth and the ability to safely Water ingestion into the transaxle, transfer case, cross.
Page 362: After Driving Off-Road
360 STARTING AND OPERATING • Check threaded fasteners for looseness, particularly on CAUTION! the chassis, drivetrain components, steering, and sus- pension. Retighten them, if required, and torque to the Muddy waters can reduce the cooling system effec- values specified in the Service Manual. tiveness by depositing debris onto the radiator.
Page 363: Power Steering
STARTING AND OPERATING 361 If for some reason the power assist is interrupted, it will WARNING! (Continued) still be possible to steer your vehicle. Under these condi- not have full braking power when you need it to tions, you will observe a substantial increase in steering prevent a collision.
Page 364: Power Steering Fluid Check
362 STARTING AND OPERATING CAUTION! CAUTION! Prolonged operation of the steering system at the end Do not use chemical flushes in your power steering of the steering wheel travel will increase the steering system as the chemicals can damage your power fluid temperature and it should be avoided when steering components.
Page 365: Parking Brake
STARTING AND OPERATING 363 PARKING BRAKE Before leaving the vehicle, make sure that the parking brake is fully applied. Also, be certain to leave an automatic transmission in PARK, or manual transmission in REVERSE or first gear. The parking brake lever is located in the center console. To apply the parking brake, pull the lever up as firmly as possible.
Page 366 364 STARTING AND OPERATING NOTE: WARNING! • When the parking brake is applied and the automatic • When leaving the vehicle, always remove the Key transmission is placed in gear, the “Brake Warning Fob from the ignition and lock your vehicle. Light”...
Page 367: Brake System
STARTING AND OPERATING 365 BRAKE SYSTEM WARNING! (Continued) Your vehicle is equipped with power assisted brakes as • Always fully apply the parking brake when leav- standard equipment. In the event power assist is lost for ing your vehicle or it may roll and cause damage or any reason (for example, repeated brake applications injury.
Page 368: Anti-Lock Brake System (Abs)
366 STARTING AND OPERATING If either of the two hydraulic systems lose normal capa- Anti-Lock Brake System (ABS) bility, the remaining system will still function with some The ABS provides increased vehicle stability and brake loss of overall braking effectiveness. This will be evident performance under most braking conditions.
Page 369 STARTING AND OPERATING 367 required. However, the conventional brake system will WARNING! (Continued) continue to operate normally if the “Brake Warning • The ABS cannot prevent collisions, including those Light” is not on. resulting from excessive speed in turns, following If the “ABS Warning Light”...
Page 370: Electronic Brake Control System
368 STARTING AND OPERATING working properly. This self-check occurs each time the WARNING! vehicle is started and accelerated past 7 mph (11 km/h). The Anti-Lock Brake System (ABS) contains sophis- ABS is activated during braking under certain road or ticated electronic equipment that may be susceptible stopping conditions.
Page 371: Anti-Lock Brake System (Abs)
STARTING AND OPERATING 369 (TCS), Brake Assist System (BAS), Electronic Roll Mitiga- WARNING! tion (ERM), Hill Descent Control (HDC), Hill Start Assist • Pumping of the anti-lock brakes will diminish (HSA), and Electronic Stability Control (ESC). All sys- tems work together to enhance vehicle stability and their effectiveness and may lead to a collision.
Page 372: Traction Control System (Tcs)
370 STARTING AND OPERATING Traction Control System (TCS) system detects an emergency braking situation by sens- ing the rate and amount of brake application and then This system monitors the amount of wheel spin of each of applies optimum pressure to the brakes. This can help the driven wheels.
Page 373: Electronic Roll Mitigation (Erm)
STARTING AND OPERATING 371 engine power to lessen the chance that wheel lift will WARNING! (Continued) occur. ERM will only intervene during very severe or • The BAS cannot prevent collisions, including those evasive driving maneuvers. resulting from excessive speed in turns, driving on ERM can only reduce the chance of wheel lift occurring very slippery surfaces, or hydroplaning.
Page 374: Hill Descent Control (Hdc) - If Equipped
372 STARTING AND OPERATING or REVERSE. Refer to “Safe Off-Road Driving” in “Start- WARNING! (Continued) ing and Operating” for further information. that wheel lift or rollover may occur. ERM cannot When HDC is properly enabled, the “Hill prevent all wheel lift or roll overs, especially those Decent Control Light”...
Page 375: Hill Start Assist (Hsa)
STARTING AND OPERATING 373 normal. When either the brake or the accelerator is the level of brake pressure the driver applied for a short released, HDC will control the vehicle back to the origi- period of time after the driver takes their foot off of the nal set speed.
Page 376 374 STARTING AND OPERATING • Gear selection matches vehicle uphill direction (i.e., “Electronic Vehicle Information Center (EVIC)” in “Un- vehicle facing uphill is in forward gear; vehicle back- derstanding Your Instrument Panel” for further informa- ing uphill is in REVERSE gear). tion.
Page 377: Electronic Stability Control (Esc)
STARTING AND OPERATING 375 7. Press the “ESC Off” switch (located in the lower Electronic Stability Control (ESC) switch bank below the climate controls) four times This system enhances directional control and stability of within 20 seconds. The “ESC Activation/Malfunction the vehicle under various driving conditions.
Page 378 376 STARTING AND OPERATING ESC Operating Modes WARNING! The ESC system has three available operating modes for • The Electronic Stability Control (ESC) cannot pre- four–wheel drive equipped vehicles and two available vent the natural laws of physics from acting on the operating modes for two–wheel drive equipped vehicles.
Page 379 STARTING AND OPERATING 377 Indicator Light will be illuminated. All other stability WARNING! features of ESC function normally. This mode is intended to be used if the vehicle is in deep snow, sand or gravel When in “Partial Off” mode, the TCS functionality of conditions and more wheel spin than ESC would nor- ESC (except for the limited slip feature described in mally allow is required to gain traction.
Page 380 378 STARTING AND OPERATING Light will illuminate and the “ESC OFF” message will NOTE: The “ESC OFF” message will display and an appear in the odometer. Press and release the Trip audible chime will sound when the shift lever is placed Odometer button located on the instrument cluster to into the PARK position from any other position, and then clear this message.
Page 381: Esc Activation/Malfunction Indicator Light And Esc Off Indicator Light
STARTING AND OPERATING 379 ESC Activation/Malfunction Indicator Light And The “ESC Activation/Malfunction Indicator Light” (lo- ESC OFF Indicator Light cated in the instrument cluster) starts to flash as soon as the tires lose traction and the ESC system becomes active. The “ESC Activation/Malfunction Indicator Light”...
Page 382: Tire Safety Information
380 STARTING AND OPERATING • The ESC system will make buzzing or clicking sounds TIRE SAFETY INFORMATION when it is active. This is normal; the sounds will stop Tire Markings when ESC becomes inactive following the maneuver that caused the ESC activation. The “ESC OFF Indicator Light”...
Page 383 STARTING AND OPERATING 381 • Temporary spare tires are designed for temporary NOTE: emergency use only. Temporary high pressure com- • P (Passenger) — Metric tire sizing is based on U.S. pact spare tires have the letter “T” or “S” molded into design standards.
Page 384 382 STARTING AND OPERATING Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ..blank..= Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards T or S = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm)
Page 385 STARTING AND OPERATING 383 EXAMPLE: Service Description: 95 = Load Index – A numerical code associated with the maximum load a tire can carry H = Speed Symbol – A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions –...
Page 386: Tire Identification Number (Tin)
384 STARTING AND OPERATING EXAMPLE: Maximum Load – Maximum load indicates the maximum load this tire is designed to carry Maximum Pressure – Maximum pressure indicates the maximum permissible cold tire inflation pressure for this tire Tire Identification Number (TIN) Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle.
Page 387: Tire Terminology And Definitions
STARTING AND OPERATING 385 EXAMPLE: DOT MA L9 ABCD 0301 ABCD = Code used by the tire manufacturer (one to four digits) 03 = Number representing the week in which the tire was manufactured (two digits) – 03 means the 3rd week 01 = Number representing the year in which the tire was manufactured (two digits) –...
Page 388 386 STARTING AND OPERATING Term Definition Cold Tire Inflation Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period. In- flation pressure is measured in units of PSI (pounds per square inch) or kPa (kilopascals).
Page 389: Tire Loading And Tire Pressure
STARTING AND OPERATING 387 Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door. B-Pillar Location For Tire And Loading Information Placard...
Page 390 388 STARTING AND OPERATING Tire And Loading Information Placard 3. Tire size designed for your vehicle. 4. Cold tire inflation pressures for the front, rear, and spare tires. Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the Tire and Loading...
Page 391 STARTING AND OPERATING 389 To determine the maximum loading conditions of your 4. The resulting figure equals the available amount of vehicle, locate the statement “The combined weight of cargo and luggage load capacity. For example, if “XXX” occupants and cargo should never exceed XXX lbs or amount equals 1,400 lbs (635 kg) and there will be five XXX kg”...
Page 392 390 STARTING AND OPERATING • For the following example, the combined weight of NOTE: occupants and cargo should never exceed 865 lbs • If your vehicle will be towing a trailer, load from your (392 kg). trailer will be transferred to your vehicle. The follow- ing table shows examples on how to calculate total load, cargo/luggage, and towing capacities of your vehicle with varying seating configurations and num-...
Page 393 STARTING AND OPERATING 391...
Page 394: Tires - General Information
392 STARTING AND OPERATING Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause collisions. recommended load capacity for your vehicle.
Page 395: Tire Inflation Pressures
STARTING AND OPERATING 393 Ride Comfort And Vehicle Stability WARNING! (Continued) Proper tire inflation contributes to a comfortable ride. • Unequal tire pressures from one side of the vehicle Over-inflation produces a jarring and uncomfortable to the other can cause the vehicle to drift to the ride.
Page 396 394 STARTING AND OPERATING At least once a month: 1 mile (1.6 km) after a three hour period. The cold tire inflation pressure must not exceed the maximum infla- • Check and adjust tire pressure with a good quality tion pressure molded into the tire sidewall. pocket-type pressure gauge.
Page 397: Tire Pressures For High Speed Operation
STARTING AND OPERATING 395 Tire Pressures For High Speed Operation Radial Ply Tires The manufacturer advocates driving at safe speeds and WARNING! within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle...
Page 398: All Season Tires - If Equipped
396 STARTING AND OPERATING Consult an authorized tire dealer for tire repairs and on ice. If your vehicle is equipped with summer tires, be additional information. aware these tires are not designed for winter or cold driving conditions. For more information, contact a au- Damaged Run Flat tires, or Run Flat tires that have thorized dealer.
Page 399: Spare Tire Matching Original Equipped Tire And Wheel - If Equipped
STARTING AND OPERATING 397 Snow tires generally have lower speed ratings than what rotation for your vehicle. If your vehicle has this option, was originally equipped with your vehicle and should refer to an authorized tire dealer for the recommended not be operated at sustained speeds over 75 mph tire rotation pattern.
Page 400: Full Size Spare - If Equipped
398 STARTING AND OPERATING Do not install a wheel cover or attempt to mount a front or rear axle of your vehicle, but it is not. This spare conventional tire on the compact spare wheel, since the tire may have limited tread life. When the tread is worn wheel is designed specifically for the compact spare tire.
Page 401: Tire Spinning
STARTING AND OPERATING 399 Refer to “Freeing A Stuck Vehicle” in “What To Do In WARNING! Emergencies” for further information. Limited-use spares are for emergency use only. In- WARNING! stallation of this limited-use spare tire affects vehicle handling. With this tire, do not drive more than the Fast spinning tires can be dangerous.
Page 402: Life Of Tire
400 STARTING AND OPERATING tread wear indicators, the tire should be replaced. Refer to “Replacement Tires” in this section for further infor- mation. Life Of Tire The service life of a tire is dependent upon varying factors including, but not limited to: •...
Page 403: Replacement Tires
STARTING AND OPERATING 401 Information placard or the Vehicle Certification Label for WARNING! the size designation of your tire. The Load Index and Speed Symbol for your tire will be found on the original Tires and the spare tire should be replaced after six equipment tire sidewall.
Page 404: Tire Chains (Traction Devices)
402 STARTING AND OPERATING WARNING! WARNING! (Continued) • Failure to equip your vehicle with tires having • Do not use a tire, wheel size or rating other than adequate speed capability can result in sudden tire that specified for your vehicle. Some combinations failure and loss of vehicle control.
Page 405: Tire Rotation Recommendations
STARTING AND OPERATING 403 These effects can be reduced by timely rotation of tires. CAUTION! The benefits of rotation are especially worthwhile with aggressive tread designs such as those on all season type Damage to the vehicle may result if tire chains are tires.
Page 406: Tire Pressure Monitoring System (Tpms)
404 STARTING AND OPERATING The tire pressure will vary with temperature by about 1 psi (7.0 kPa) for every 12°F (6.5°C). This means that when the outside temperature decreases, the tire pressure will decrease. Tire pressure should always be set based on “cold inflation tire pressure”.
Page 407 STARTING AND OPERATING 405 The TPMS will continue to warn the driver of low tire For example, your vehicle may have a recommended pressure as long as the condition exists, and will not turn cold (parked for more than three hours) placard pressure off until the tire pressure is at or above the recommended of 30 psi (207 kPa).
Page 408 406 STARTING AND OPERATING CAUTION! CAUTION! (Continued) • After inspecting or adjusting the tire pressure, • The TPMS has been optimized for the original always reinstall the valve stem cap. This will equipment tires and wheels. TPMS pressures and prevent moisture and dirt from entering the valve warning have been established for the tire size stem, which could damage the Tire Pressure Moni- equipped on your vehicle.
Page 409: Base System
STARTING AND OPERATING 407 Under-inflation also reduces fuel efficiency and tire The TPMS uses wireless technology with wheel rim tread life, and may affect the vehicle’s handling and mounted electronic sensors to monitor tire pressure lev- stopping ability. els. Sensors, mounted to each wheel as part of the valve stem, transmit tire pressure readings to the Receiver •...
Page 410 408 STARTING AND OPERATING audible chime will be activated when one or more of the Pressure Monitoring Telltale Light will turn off when the four active road tire pressures are low. Should this occur, fault condition no longer exists. A system fault can occur you should stop as soon as possible, check the inflation with any of the following scenarios: pressure of each tire on your vehicle, and inflate each tire...
Page 411: Premium System - If Equipped
STARTING AND OPERATING 409 2. If you install the compact spare tire in place of a road long as no tire pressure is below the low-pressure tire that has a pressure below the low-pressure warn- warning limit in any of the four active road tires. The ing limit, upon the next ignition key cycle, a chime will vehicle may need to be driven for up to 20 minutes sound and the Tire Pressure Monitoring Telltale Light...
Page 412 410 STARTING AND OPERATING • Three Trigger Modules (mounted in three of the four wheel wells) • Various Tire Pressure Monitoring System Messages, which display in the Electronic Vehicle Information Center (EVIC) • Tire Pressure Monitoring Telltale Light Tire Pressure Monitoring Low Pressure Warnings The Tire Pressure Monitoring Telltale Light will illumi- nate in the instrument cluster and an audible chime will be activated when one or more of the four active road tire...
Page 413 STARTING AND OPERATING 411 the graphic display of the pressure value(s) will stop flashing, and the Tire Pressure Monitoring Light will extinguish once the updated tire pressure(s) have been received. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) to receive this infor- mation.
Page 414 412 STARTING AND OPERATING will be displayed instead of dashes. A system fault can pressure values still shown. This indicates that the pres- occur with any of the following scenarios: sure values are still being received from the TPM sensors but they may not be located in the correct vehicle 1.
Page 415: General Information
STARTING AND OPERATING 413 3. However, after driving the vehicle for up to 20 min- long as no tire pressure is below the low-pressure utes above 15 mph (24 km/h), the Tire Pressure warning limit in any of the four active road tires. The Monitoring Telltale Light will flash on and off for 75 vehicle may need to be driven for up to 20 minutes seconds and then remain on solid.
Page 416: Fuel Requirements
414 STARTING AND OPERATING The tire pressure sensors are covered under one of the high speeds can cause damage and immediate service is following licenses: required. Poor quality gasoline can cause problems such as hard starting, stalling, and hesitations. If you experi- United States MRXC4N3MF9 ence these symptoms, try another brand of gasoline...
Page 417: Gasoline/Oxygenate Blends
STARTING AND OPERATING 415 The manufacturer supports the use of reformulated gaso- Problems that result from using gasoline containing line. Properly blended reformulated gasoline will pro- Methanol or gasoline containing more than 10% Ethanol vide excellent performance and durability of engine and are not the responsibility of the manufacturer and may fuel system components.
Page 418: Mmt In Gasoline
416 STARTING AND OPERATING • Poor engine performance. blended with MMT provides no performance advantage beyond gasoline of the same octane number without • Poor cold start and cold drivability. MMT. Gasoline blended with MMT reduces spark plug • Increased risk for fuel system component corrosion. life and reduces emissions system performance in some vehicles.
Page 419: Fuel System Cautions
STARTING AND OPERATING 417 Fuel System Cautions CAUTION! (Continued) • The use of fuel additives, which are now being CAUTION! sold as octane enhancers, is not recommended. Follow these guidelines to maintain your vehicle’s Most of these products contain high concentrations performance: of methanol.
Page 420: Carbon Monoxide Warnings
418 STARTING AND OPERATING Carbon Monoxide Warnings WARNING! (Continued) • Guard against carbon monoxide with proper main- WARNING! tenance. Have the exhaust system inspected every Carbon monoxide (CO) in exhaust gases is deadly. time the vehicle is raised. Have any abnormal Follow the precautions below to prevent carbon conditions repaired promptly.
Page 421 STARTING AND OPERATING 419 After removing the gas cap, place the gas cap tether cable CAUTION! over a hook on the inside of the fuel door. This keeps the • Damage to the fuel system or emission control gas cap suspended away from and protects the vehicle’s surface.
Page 422: Loose Fuel Filler Cap Message
420 STARTING AND OPERATING • If the gas cap is not tightened properly, the MIL will WARNING! (Continued) come on. Be sure the gas cap is tightened every time • Never add fuel when the engine is running. This is the vehicle is refueled.
Page 423: Vehicle Loading
STARTING AND OPERATING 421 VEHICLE LOADING The bar code allows a computer scanner to read the Vehicle Identification Number (VIN). As required by National Highway Traffic Safety Admin- istration regulations, your vehicle has a certification label Gross Vehicle Weight Rating (GVWR) affixed to the driver’s side door or B-Pillar.
Page 424 422 STARTING AND OPERATING Inflation Pressure The best way to figure out the total weight of your vehicle is to weigh it when it is fully loaded and ready for This is the cold tire inflation pressure for your vehicle for operation.
Page 425: Trailer Towing
STARTING AND OPERATING 423 Common Towing Definitions CAUTION! The following trailer towing related definitions will assist Do not load your vehicle any heavier than the you in understanding the following information: GVWR. If you do, parts on your vehicle can break, or Gross Vehicle Weight Rating (GVWR) it can change the way your vehicle handles.
Page 426 424 STARTING AND OPERATING measure GTW is to put your fully loaded trailer on a WARNING! vehicle scale. The entire weight of the trailer must be supported by the scale. It is important that you do not exceed the maximum front or rear GAWR.
Page 427 STARTING AND OPERATING 425 Trailer Sway Control tow vehicle’s front axle and the trailer axle(s). When used in accordance with the manufacturer’s directions, it pro- The trailer sway control is a telescoping link that can be vides for a more level ride, offering more consistent installed between the hitch receiver and the trailer tongue steering and brake control thereby enhancing towing that typically provides adjustable friction associated with...
Page 428: Trailer Hitch Classification
426 STARTING AND OPERATING Trailer Hitch Classification Definitions WARNING! Class Max. Trailer Hitch In- • An improperly adjusted Weight Distributing Hitch dustry Standards system may reduce handling, stability, braking Class I - Light Duty 2,000 lbs (907 kg) performance, and could result in a collision. •...
Page 429: Trailer Towing Weights
STARTING AND OPERATING 427 Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Maximum GTW (Gross Maximum Tongue Wt. Engine/Transmission Frontal Area Trailer Wt.) (See Note) 2.0L Auto/Man 22 sq ft (2.04 sq m) 1,000 lbs (450 kg) 150 lbs (68 kg)
Page 430: Trailer And Tongue Weight
428 STARTING AND OPERATING NOTE: The trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight referenced on the Tire and Loading Information placard. Refer to “Tire Safety Information”...
Page 431 STARTING AND OPERATING 429 NOTE: Remember that everything put into or on the CAUTION! (Continued) trailer adds to the load on your vehicle. Also, additional • Then, during the first 500 miles (805 km) that a factory-installed options or dealer-installed options must trailer is towed, do not drive over 50 mph (80 km/h) be considered as part of the total load on your vehicle.
Page 432 430 STARTING AND OPERATING WARNING! WARNING! (Continued) • Safety chains must always be used between your Improper towing can lead to a collision. Follow these vehicle and trailer. Always connect the chains to guidelines to make your trailer towing as safe as the frame or hook retainers of the vehicle hitch.
Page 433 STARTING AND OPERATING 431 • Proper tire inflation pressures are essential to the safe WARNING! (Continued) and satisfactory operation of your vehicle. Refer to • Total weight must be distributed between the tow “Tires – General Information” in “Starting And Oper- vehicle and the trailer such that the following four ating”...
Page 434 432 STARTING AND OPERATING Towing Requirements — Trailer Brakes WARNING! • Do not interconnect the hydraulic brake system or • Do not connect trailer brakes to your vehicle’s vacuum system of your vehicle with that of the trailer. hydraulic brake lines. It can overload your brake This could cause inadequate braking and possible system and cause it to fail.
Page 435 STARTING AND OPERATING 433 The electrical connections are all complete to the vehicle CAUTION! but you must mate the harness to a trailer connector. Refer to the following illustrations. If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they should be of adequate capacity.
Page 436 434 STARTING AND OPERATING Towing Tips Before setting out on a trip, practice turning, stopping, and backing up the trailer in an area located away from heavy traffic. Manual Transmission — If Equipped If using a manual transmission vehicle for trailer towing, all starts must be in first gear to avoid excessive clutch slippage.
Page 437 STARTING AND OPERATING 435 NOTE: Using a lower gear ratio while operating the AutoStick® — If Equipped vehicle under heavy loading conditions, will improve When using the AutoStick® shift control, select the performance and extend transmission life by reducing highest gear that allows for adequate performance and excessive shifting and heat buildup.
Page 438 436 STARTING AND OPERATING Electronic Speed Control — If Equipped Cooling System • Do not use in hilly terrain or with heavy loads. To reduce potential for engine and transmission over- heating, take the following actions: • When using the speed control, if you experience speed City Driving drops greater than 10 mph (16 km/h), disengage until you can get back to cruising speed.
Page 439 STARTING AND OPERATING 437 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Towing Condition Wheels OFF the Ground Manual Transmission Automatic Transmission • Transmission in NEU- Flat Tow None NOT ALLOWED TRAL • Key in ACC Position Dolly Tow Front OK (FWD Only)
Page 440 438 STARTING AND OPERATING CAUTION! • DO NOT flat tow any vehicle equipped with an automatic transmission. Damage to the drivetrain will result. If these vehicles require towing, make sure all drive wheels are OFF the ground. • DO NOT dolly tow any 4WD vehicle. Internal damage to the transmission or transfer case will occur if a dolly is used when recreational towing.
Page 441 WHAT TO DO IN EMERGENCIES CONTENTS ▫ Preparations For Jacking ....446 HAZARD WARNING FLASHERS ...441 ▫...
Page 442 440 WHAT TO DO IN EMERGENCIES ▫ Jump-Starting Procedure ....468 TOWING A DISABLED VEHICLE ...474 ▫...
Page 443: Hazard Warning Flashers
WHAT TO DO IN EMERGENCIES 441 HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the instrument panel below the climate controls. potential for overheating by taking the appropriate ac- tion.
Page 444: Automatic Transmission Overheating
442 WHAT TO DO IN EMERGENCIES CAUTION! WARNING! (Continued) to cool. Never try to open a cooling system pressure Driving with a hot cooling system could damage cap when the radiator or coolant bottle is hot. your vehicle. If the pointer rises to the H (red) mark, the instrument cluster will sound a chime.
Page 445: Wheel And Tire Torque Specifications
WHAT TO DO IN EMERGENCIES 443 WHEEL AND TIRE TORQUE SPECIFICATIONS Proper lug nut/bolt torque is very important to ensure that the wheel is properly mounted to the vehicle. Any time a wheel has been removed and reinstalled on the vehicle the lug nuts/bolts should be torqued using a properly calibrated torque wrench.
Page 446: Jacking And Tire Changing
444 WHAT TO DO IN EMERGENCIES WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. JACKING AND TIRE CHANGING WARNING! •...
Page 447: Jack Location
WHAT TO DO IN EMERGENCIES 445 WARNING! (Continued) • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift.
Page 448: Preparations For Jacking
446 WHAT TO DO IN EMERGENCIES Preparations For Jacking 6. Block both the front and rear of the wheel diagonally opposite of the jacking position. For 1. Park the vehicle on a firm level surface, avoiding ice or example, if changing the right front slippery areas.
Page 449: Jacking Instructions
WHAT TO DO IN EMERGENCIES 447 Jacking Instructions WARNING! (Continued) • Do not let anyone sit in the vehicle when it is on a WARNING! jack. • Do not get under the vehicle when it is on a jack. If Carefully follow these tire changing warnings to help prevent personal injury or damage to your you need to get under a raised vehicle, take it to a...
Page 450 448 WHAT TO DO IN EMERGENCIES 1. Remove the scissors jack and lug wrench from the spare wheel as an assembly. Turn the jack screw to the left to loosen the lug wrench and remove the wrench from the jack assembly. NOTE: The jack handle attaches to the side of the jack Jack Warning Label with two attachment points.
Page 451 WHAT TO DO IN EMERGENCIES 449 NOTE: There are front and rear jacking locations on each side of the body. The front locations are outlined by two triangular cutouts on one of the flanges in the sill flange assembly. The rear location is the same but with two rectangular cutouts.
Page 452 450 WHAT TO DO IN EMERGENCIES Jacking Locations Front Jacking Location CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated.
Page 453 WHAT TO DO IN EMERGENCIES 451 jack head is properly engaged with the lift area closest to the wheel to be changed. WARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it.
Page 454 452 WHAT TO DO IN EMERGENCIES WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. Mounting Spare Tire CAUTION! Be sure to mount the spare tire with the valve stem...
Page 455 WHAT TO DO IN EMERGENCIES 453 8. Remove the wheel blocks and lower the jack until it is WARNING! free. Release the parking brake. Reassemble the lug wrench to the jack assembly and stow it in the spare To avoid possible personal injury, handle the wheel tire area.
Page 456: Road Tire Installation
454 WHAT TO DO IN EMERGENCIES WARNING! A loose tire thrown forward in a collision or hard stop could injure the occupants in the vehicle. Have the deflated (flat) tire repaired or replaced immediately. 10. Check the spare tire pressure as soon as possible. Correct the tire pressure as required.
Page 457 WHAT TO DO IN EMERGENCIES 455 3. Install the five wheel lug nuts with the cone shaped 6. After 25 miles (40 km) check the lug nut torque with a end of the nut toward the wheel. Lightly tighten the torque wrench to ensure that all lug nuts are properly lug nuts.
Page 458: Tirefit Kit - If Equipped
456 WHAT TO DO IN EMERGENCIES 4. Finish tightening the lug nuts. Push down on the This kit will provide a temporary tire seal, allowing you wrench while at the end of the handle for increased to drive your vehicle up to 100 miles (160 km) with a leverage.
Page 459: Tirefit Kit Components And Operation
WHAT TO DO IN EMERGENCIES 457 TIREFIT Kit Components And Operation Using The Mode Select Knob And Hoses Your TIREFIT kit is equipped with the following symbols to indicate the air or sealant mode. Selecting Air Mode Push in the Mode Select Knob (5) and turn to this position for air pump operation only.
Page 460: Tirefit Usage Precautions
458 WHAT TO DO IN EMERGENCIES Using The Power Button Push and release the Power Button (4) once to turn On the TIREFIT kit. Push and release the Power Button (4) again to turn Off the TIREFIT kit. Using The Deflation Button Press the Deflation Button (2) to reduce the air pressure in the tire if it becomes over-inflated.
Page 461 WHAT TO DO IN EMERGENCIES 459 the vehicle or tire and wheel components. Once the WARNING! sealant dries, it can easily be peeled off and properly • Do not attempt to seal a tire on the side of the discarded. vehicle closest to traffic.
Page 462: Sealing A Tire With Tirefit
460 WHAT TO DO IN EMERGENCIES WARNING! (Continued) WARNING! (Continued) • Keep TIREFIT away from open flames or heat • TIREFIT Sealant solution contains latex. In case of source. an allergic reaction or rash, consult a physician • A loose TIREFIT kit thrown forward in a collision immediately.
Page 463 WHAT TO DO IN EMERGENCIES 461 kit when injecting the sealant into the deflated tire and 4. Remove the cap from the valve stem and then screw running the air pump. Move the vehicle as necessary the fitting at the end of the Sealant Hose (6) onto the to place the valve stem in this position before proceed- valve stem.
Page 464 462 WHAT TO DO IN EMERGENCIES NOTE: Sealant may leak out through the puncture in the NOTE: If the Mode Select Knob (5) is on Air Mode and tire. the pump is operating, air will dispense from the Air Pump Hose (7) only, not the Sealant Hose (6). If the sealant (white fluid) does not flow within 0 –...
Page 465 WHAT TO DO IN EMERGENCIES 463 If the tire does not inflate to at least 26 psi (1.8 Bar) the hose, and place the TIREFIT kit in the vehicle storage pressure within 15 minutes: location. Quickly proceed to (D) “Drive Vehicle.” •...
Page 466 464 WHAT TO DO IN EMERGENCIES 3. Uncoil the Air Pump Hose (7) (black in color) and WARNING! screw the fitting at the end of hose (7) onto the valve stem. TIREFIT is not a permanent flat tire repair. Have the tire inspected and repaired or replaced after using 4.
Page 467 WHAT TO DO IN EMERGENCIES 465 2. Disconnect the TIREFIT kit from the valve stem, (F) Sealant Bottle And Hose Replacement: reinstall the cap on the valve stem and unplug from 12 1. Uncoil the Sealant Hose (6) (clear in color). Volt outlet.
Page 468: Jump-Starting Procedures
466 WHAT TO DO IN EMERGENCIES 6. Verify that the cap is installed on the fitting at the end CAUTION! of the Sealant Hose (6) and return the hose to its storage area (located on the bottom of the air pump). Do not use a portable battery booster pack or any other booster source with a system voltage greater 7.
Page 469: Preparations For Jump-Start
WHAT TO DO IN EMERGENCIES 467 Preparations For Jump-Start The battery in your vehicle is located in the front of the engine compartment below the air intake duct. To access the battery remove the air intake duct by turning the two finger screws, located on the radiator support.
Page 470: Jump-Starting Procedure
468 WHAT TO DO IN EMERGENCIES 3. If using another vehicle to jump-start the battery, park WARNING! the vehicle within the jumper cables reach, set the • Take care to avoid the radiator cooling fan when- parking brake and make sure the ignition is OFF. ever the hood is raised.
Page 471 WHAT TO DO IN EMERGENCIES 469 the discharged vehicle’s engine) away from the battery CAUTION! and the fuel injection system. Failure to follow these procedures could result in WARNING! damage to the charging system of the booster vehicle or the discharged vehicle. Do not connect the jumper cable to the negative (-) post of the discharged battery.
Page 472: Freeing A Stuck Vehicle
470 WHAT TO DO IN EMERGENCIES 6. Once the engine is started, remove the jumper cables If frequent jump-starting is required to start your vehicle in the reverse sequence: you should have the battery and charging system in- spected at your authorized dealer. Disconnecting The Jumper Cables 1.
Page 473 WHAT TO DO IN EMERGENCIES 471 and REVERSE (with automatic transmission) or 2nd gear NOTE: Press the ESC Off switch, to place the Electronic and REVERSE (with manual transmission), while gently Stability Control (ESC) system in Partial Off mode, pressing the accelerator. Use the least amount of accel- before rocking the vehicle.
Page 474: Shift Lever Override
472 WHAT TO DO IN EMERGENCIES SHIFT LEVER OVERRIDE WARNING! If a malfunction occurs and the shift lever cannot be Fast spinning tires can be dangerous. Forces gener- moved out of the PARK position, you can use the ated by excessive wheel speeds may cause damage, or following procedure to temporarily move the shift lever: even failure, of the axle and tires.
Page 475 WHAT TO DO IN EMERGENCIES 473 5. Press and maintain firm pressure on the brake pedal. 6. Insert the screwdriver or similar tool into the access port, and push and hold the override release lever forward. 7. Move the shift lever to the NEUTRAL position. 8.
Page 476: Towing A Disabled Vehicle
474 WHAT TO DO IN EMERGENCIES TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial wrecker service. Towing Condition Wheels Manual Transmission Automatic Transmis- Automatic Transmis- OFF the sion (FWD Only) sion 4WD Ground Flat Tow NONE...
Page 477: With Ignition Key
WHAT TO DO IN EMERGENCIES 475 With Ignition Key Front Wheel Drive (FWD) models may also be towed (under the same limitations shown above) with the rear Automatic Transmission wheels elevated. • Front Wheel Drive (FWD) vehicles can be towed with the front wheels elevated, or on a flatbed truck (all four CAUTION! wheels OFF the ground).
Page 478 476 WHAT TO DO IN EMERGENCIES • FWD vehicles can be towed with the front wheels position, not the ACC position. Make certain the trans- elevated. mission remains in NEUTRAL. • FWD or 4WD vehicles can be towed on a flatbed truck CAUTION! (all wheels OFF the ground).
Page 479 MAINTAINING YOUR VEHICLE CONTENTS ▫ Engine Oil Filter ..... .488 ENGINE COMPARTMENT — 2.0L ..479 ▫...
Page 480 478 MAINTAINING YOUR VEHICLE ▫ Automatic Transmission (Six-Speed) — If REPLACEMENT BULBS ....524 Equipped ......506 BULB REPLACEMENT .
Page 481: Engine Compartment - 2.0L
MAINTAINING YOUR VEHICLE 479 ENGINE COMPARTMENT — 2.0L 1 — Washer Fluid Reservoir 6 — Air Cleaner Filter 2 — Power Steering Fluid Reservoir 7 — Coolant Pressure Cap 3 — Engine Oil Fill 8 — Engine Oil Dipstick 4 — Brake Fluid Reservoir 9 —...
Page 482: Engine Compartment - 2.4L
480 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 2.4L 1 — Washer Fluid Reservoir 6 — Air Cleaner Filter 2 — Power Steering Fluid Reservoir 7 — Coolant Pressure Cap 3 — Engine Oil Fill 8 — Engine Oil Dipstick 4 — Brake Fluid Reservoir 9 —...
Page 483: Onboard Diagnostic System - Obd Ii
MAINTAINING YOUR VEHICLE 481 ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated onboard • Prolonged driving with the MIL on could cause diagnostic system called OBD II. This system monitors further damage to the emission control system. It the performance of the emissions, engine, and automatic could also affect fuel economy and driveability.
Page 484: Emissions Inspection And Maintenance Programs
482 MAINTAINING YOUR VEHICLE persists, the message will appear the next time the serviced, recently had a dead battery or a battery replace- vehicle is started. This might indicate a damaged cap. If ment. If the OBD II system should be determined not the problem is detected twice in a row, the system will ready for the I/M test, your vehicle may fail the test.
Page 485: Replacement Parts
MAINTAINING YOUR VEHICLE 483 3. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD II system is happen: ready or not, if the MIL is illuminated during normal vehicle operation you should have your vehicle serviced •...
Page 486: Maintenance Procedures
484 MAINTAINING YOUR VEHICLE available which include detailed service information for MAINTENANCE PROCEDURES your vehicle. Refer to these Service Manuals before The pages that follow contain the required maintenance attempting any procedure yourself. services determined by the engineers who designed your vehicle.
Page 487: Engine Oil
MAINTAINING YOUR VEHICLE 485 fully warmed engine is shut off. Do not check oil level CAUTION! (Continued) before starting the engine after it has sat overnight. • Your vehicle has been built with improved fluids Checking engine oil level when the engine is cold will that protect the performance and durability of your give you an incorrect reading.
Page 488 486 MAINTAINING YOUR VEHICLE Engine Oil Selection CAUTION! (Continued) For best performance and maximum protection under all pressure and an increase in oil temperature. This types of operating conditions, the manufacturer only could damage your engine. Also, be sure the oil fill recommends engine oils that are API Certified and meet cap is replaced and tightened after adding oil.
Page 489 MAINTAINING YOUR VEHICLE 487 Synthetic Engine Oils CAUTION! You may use synthetic engine oils provided the recom- Do not use chemical flushes in your engine oil as the mended oil quality requirements are met, and the recom- chemicals can damage your engine. Such damage is mended maintenance intervals for oil and filter changes not covered by the New Vehicle Limited Warranty.
Page 490: Engine Oil Filter
488 MAINTAINING YOUR VEHICLE station or governmental agency for advice on how and WARNING! where used oil and oil filters can be safely discarded in your area. The air induction system (air cleaner, hoses, etc.) can provide a measure of protection in the case of engine Engine Oil Filter backfire.
Page 491: Maintenance-Free Battery
MAINTAINING YOUR VEHICLE 489 Maintenance-Free Battery WARNING! (Continued) Your vehicle is equipped with a maintenance-free battery. • Battery gas is flammable and explosive. Keep You will never have to add water, nor is periodic main- flame or sparks away from the battery. Do not use tenance required.
Page 492: Air Conditioner Maintenance
490 MAINTAINING YOUR VEHICLE CAUTION! WARNING! • It is essential when replacing the cables on the • Use only refrigerants and compressor lubricants battery that the positive cable is attached to the approved by the manufacturer for your air condi- positive post and the negative cable is attached to tioning system.
Page 493 MAINTAINING YOUR VEHICLE 491 A/C Air Filter CAUTION! Refer to the “Maintenance Schedule” for the proper Do not use chemical flushes in your air conditioning maintenance intervals. system as the chemicals can damage your air condi- tioning components. Such damage is not covered by WARNING! the New Vehicle Limited Warranty.
Page 494: Body Lubrication
492 MAINTAINING YOUR VEHICLE 4. Disengage the two retaining tabs that secure the filter 6. Install the A/C air filter with the arrow on the filter cover to the HVAC housing, and remove the cover. pointing toward the floor. When installing the filter cover, make sure the retaining tabs fully engage the cover.
Page 495: Windshield Wiper Blades
MAINTAINING YOUR VEHICLE 493 the application of any lubricant, the parts concerned Operation of the wipers on dry glass for long periods should be wiped clean to remove dust and grit; after may cause deterioration of the wiper blades. Always use lubricating excess oil and grease should be removed.
Page 496: Exhaust System
494 MAINTAINING YOUR VEHICLE When refilling the washer fluid reservoir, take some Exhaust System washer fluid and apply it to a cloth or towel and wipe The best protection against carbon monoxide entry into clean the wiper blades, this will help blade performance. the vehicle body is a properly maintained engine exhaust To prevent freeze-up of your windshield washer system system.
Page 497 MAINTAINING YOUR VEHICLE 495 WARNING! CAUTION! • Exhaust gases can injure or kill. They contain • The catalytic converter requires the use of un- carbon monoxide (CO), which is colorless and leaded fuel only. Leaded gasoline will destroy the odorless. Breathing it can make you unconscious effectiveness of the catalyst as an emissions control and can eventually poison you.
Page 498 496 MAINTAINING YOUR VEHICLE Under normal operating conditions, the catalytic con- To minimize the possibility of catalytic converter dam- verter will not require maintenance. However, it is im- age: portant to keep the engine properly tuned to assure • Do not shut off the engine or interrupt the ignition, proper catalyst operation and prevent possible catalyst when the transmission is in gear and the vehicle is in damage.
Page 499: Cooling System
MAINTAINING YOUR VEHICLE 497 Cooling System Coolant Checks Check engine coolant (antifreeze) protection every 12 WARNING! months (before the onset of freezing weather, where applicable). If the engine coolant (antifreeze) is dirty or • When working near the radiator cooling fan, rusty in appearance, the system should be drained, disconnect the fan motor lead or turn the ignition flushed, and refilled with fresh engine coolant (anti-...
Page 500 498 MAINTAINING YOUR VEHICLE Cooling System — Drain, Flush And Refill CAUTION! If the engine coolant (antifreeze) is dirty or contains visible • Mixing of engine coolant (antifreeze) other than sediment, have an authorized dealer clean and flush with specified Organic Additive Technology (OAT) en- OAT coolant (antifreeze) (conforming to MS-12106).
Page 501 MAINTAINING YOUR VEHICLE 499 you use the same engine coolant (OAT coolant conform- CAUTION! (Continued) ing to MS-12106) throughout the life of your vehicle. • Do not use water alone or alcohol-based engine Please review these recommendations for using Organic coolant (antifreeze) products.
Page 502 500 MAINTAINING YOUR VEHICLE • Mixing engine coolant (antifreeze) types is not recom- (antifreeze) solution. The use of lower quality water will reduce the amount of corrosion protection in the mended and can result in cooling system damage. If engine cooling system. HOAT and OAT coolant are mixed in an emergency, have a authorized dealer drain, flush, and refill with Please note that it is the owner’s responsibility to main-...
Page 503 MAINTAINING YOUR VEHICLE 501 rules for your community. To prevent ingestion by ani- WARNING! mals or children, do not store ethylene glycol-based • The warning words “DO NOT OPEN HOT” on the engine coolant in open containers or allow it to remain in puddles on the ground.
Page 504 502 MAINTAINING YOUR VEHICLE • Check the coolant freeze point in the radiator and in long as the engine operating temperature is satisfactory, the coolant bottle need only be checked once a month. the coolant expansion bottle. If engine coolant (anti- freeze) needs to be added, the contents of the coolant When additional engine coolant (antifreeze) is needed to expansion bottle must also be protected against freez-...
Page 505: Brake System
MAINTAINING YOUR VEHICLE 503 • Do not change the thermostat for Summer or Winter WARNING! (Continued) operation. If replacement is ever necessary, install high brake temperatures, excessive lining wear, and ONLY the correct type thermostat. Other designs may possible brake damage. You would not have your full result in unsatisfactory engine coolant (antifreeze) braking capacity in an emergency.
Page 506 504 MAINTAINING YOUR VEHICLE NOTE: If your vehicle is equipped with a manual trans- WARNING! mission, the brake fluid reservoir supplies fluid to both • Use only manufacturer’s recommended brake the brake system and the clutch release system. The two systems are separated in the reservoir, and a leak in one fluid.
Page 507 MAINTAINING YOUR VEHICLE 505 WARNING! (Continued) WARNING! (Continued) • To avoid contamination from foreign matter or • Do not allow petroleum based fluid to contaminate moisture, use only new brake fluid or fluid that has the brake fluid. Brake seal components could be been in a tightly closed container.
Page 508: Maintaining Your Vehicle ▫ Automatic Transmission (Six-Speed) - If Equipped
506 MAINTAINING YOUR VEHICLE Automatic Transmission (Six-Speed) — If CAUTION! (Continued) Equipped in transmission shift quality, and will require more Selection Of Lubricant (Six-Speed Transmission) frequent fluid and filter changes. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for It is important to use the proper transmission fluid to fluid specifications.
Page 509 MAINTAINING YOUR VEHICLE 507 CAUTION! CAUTION! Do not use chemical flushes in your transmission as If a transmission fluid leak occurs, visit your autho- the chemicals can damage your transmission compo- rized dealer immediately. Severe transmission dam- nents. Such damage is not covered by the New age may occur.
Page 510: Automatic Transmission (Cvt) - If Equipped
508 MAINTAINING YOUR VEHICLE Automatic Transmission (CVT) — If Equipped CAUTION! Selection Of Lubricant (CVT) • Do not use chemical flushes in your transmission It is important to use the proper transmission fluid to as the chemicals can damage your transmission ensure optimum transmission performance and life.
Page 511 MAINTAINING YOUR VEHICLE 509 use of special dyes for diagnosing fluid leaks. Avoid your authorized dealer immediately to have the trans- using transmission sealers as they may adversely affect mission fluid level checked. Operating the vehicle with seals. an improper fluid level can cause severe transmission damage.
Page 512: Manual Transmission - If Equipped
510 MAINTAINING YOUR VEHICLE Manual Transmission — If Equipped NOTE: If contaminated with water, the fluid should be changed immediately. Lubricant Selection Rear Drive Assembly (RDA) — AWD/4WD Models Use only the manufacturers recommended transmission Only fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle”...
Page 513: Only
MAINTAINING YOUR VEHICLE 511 Frequency Of Fluid Change Frequency Of Fluid Change Refer to the “Maintenance Schedule” for the proper Refer to the “Maintenance Schedule” for the proper maintenance intervals. maintenance intervals. Power Transfer Unit (PTU) — AWD/4WD Models Appearance Care And Protection From Corrosion Only Protection Of Body And Paint From Corrosion Lubricant Selection...
Page 514 512 MAINTAINING YOUR VEHICLE • If insects, tar, or other similar deposits have accumu- What Causes Corrosion? lated on your vehicle, use MOPAR® Super Kleen Bug Corrosion is the result of deterioration or removal of and Tar Remover to remove. paint and protective coatings from your vehicle.
Page 515 MAINTAINING YOUR VEHICLE 513 • If you carry special cargo such as chemicals, fertilizers, Special Care de-icer salt, etc., be sure that such materials are well • If you drive on salted or dusty roads or if you drive packaged and sealed. near the ocean, hose off the undercarriage at least once •...
Page 516 514 MAINTAINING YOUR VEHICLE NOTE: If your vehicle is equipped with Dark Vapor Stain Repel Fabric Cleaning Procedure — If Chrome wheels DO NOT USE wheel cleaners, abrasives Equipped or polishing compounds. They will permanently damage Stain Repel seats may be cleaned in the following man- this finish and such damage is not covered by the New ner: Vehicle Limited Warranty.
Page 517 MAINTAINING YOUR VEHICLE 515 Interior Care WARNING! Use MOPAR® Total Clean to clean fabric upholstery and Do not use volatile solvents for cleaning purposes. carpeting. Many are potentially flammable, and if used in Use MOPAR® Total Clean to clean vinyl upholstery. closed areas they may cause respiratory harm.
Page 518 516 MAINTAINING YOUR VEHICLE To minimize the possibility of scratching the lenses and When cleaning the rear view mirror, spray cleaner on the reducing light output, avoid wiping with a dry cloth. To towel or rag that you are using. Do not spray cleaner remove road dirt, wash with a mild soap solution fol- directly on the mirror.
Page 519 MAINTAINING YOUR VEHICLE 517 Cleaning Plastic Instrument Cluster Lenses Replace the belts if they appear frayed or worn or if the buckles do not work properly. The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care WARNING! must be taken to avoid scratching the plastic.
Page 520: Fuses
518 MAINTAINING YOUR VEHICLE FUSES WARNING! (Continued) • If a general protection fuse for safety systems (air WARNING! bag system, braking system), power unit systems • When replacing a blown fuse, always use an ap- (engine system, gearbox system) or steering system propriate replacement fuse with the same amp blows, contact an authorized dealer.
Page 521: Integrated Power Module
MAINTAINING YOUR VEHICLE 519 Integrated Power Module The Integrated Power Module is located in the engine compartment near the air cleaner assembly. This center contains cartridge fuses and mini-fuses. A label that identifies each component may be printed on the inside of the cover.
Page 522 520 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description 10 Amp Red Rear Center Brake Light Switch 10 Amp Red Ignition Switch/Occupant Classification Module 15 Amp Lt Blue Battery Feed For Power Tech 10 Amp Red Power Mirror/Steering Con- trol Satellite Radio/Hands- Free Phone 30 Amp Green Ignition Off Draw...
Page 523 MAINTAINING YOUR VEHICLE 521 Cavity Cartridge Fuse Mini-Fuse Description 20 Amp Yellow Cigar Lighter 10 Amp Red Instrument Cluster 40 Amp Green Radiator Fan 15 Amp Lt Blue Dome Lamp/Sunroof/Rear Wiper Motor 10 Amp Red Wireless Control Module 40 Amp Green Auto Shutdown Relay 20 Amp Yellow Radio Amplifiers...
Page 524 522 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description 15 Amp Lt Blue Auto Shutdown Relay 10 Amp Red Airbag Control Module 10 Amp Red Airbag Control Module/ Occupant Classification Mod- Hot Car (No Fuse Required) 20 Amp Yellow Heated Seat – If Equipped 10 Amp Red Headlamp Washer –...
Page 525 MAINTAINING YOUR VEHICLE 523 Cavity Cartridge Fuse Mini-Fuse Description 30 Amp Pink Headlamp/Washer Control/ Smart Glass – If Equipped 25 Amp Clear Diesel Fuel Heater – If Equipped CAUTION! CAUTION! (Continued) • When replacing a blown fuse, it is important to use •...
Page 526: Vehicle Storage
524 MAINTAINING YOUR VEHICLE VEHICLE STORAGE REPLACEMENT BULBS If you will not be using your vehicle for more than 21 Interior Bulbs days, you may want to take steps to preserve your Bulb Number battery. • Disengage the mini-fuse in the Power Distribution Front Header Lamp T578 Center labeled IOD (Ignition Off-Draw).
Page 527: Bulb Replacement
MAINTAINING YOUR VEHICLE 525 BULB REPLACEMENT Bulb Number Daytime Running Light 3157K NOTE: Lens fogging can occur under certain atmo- (DRL) spheric conditions. This will usually clear as atmospheric conditions change to allow the condensation to change Front Park/Turn Signal 7444NA back into a vapor.
Page 528: Fog Lamps
526 MAINTAINING YOUR VEHICLE NOTE: These are halogen bulbs. Take care not to touch the bulb with your fingers. Body oils from your fingers could cause excessive heat buildup which reduces bulb life. Fog Lamps 1. Access lamp through the lower fascia cutout. 2.
Page 529: License Lamps
MAINTAINING YOUR VEHICLE 527 License Lamps 3. Pull bulb from socket. 1. Use a screw driver to gently pry against the side of the Center High-Mounted Stoplamp snap tab to remove the lamp from the liftgate. This light is an LED assembly. See your authorized dealer for replacement.
Page 530: Fluids, Lubricants And Genuine Parts
528 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant We recommend you use MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Chrysler Material Standard MS-12106. Engine Oil We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395 such as MOPAR®,...
Page 531: Chassis
MAINTAINING YOUR VEHICLE 529 Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission (CVT) — If Equipped We recommend you use MOPAR® CVTF+4® Continu- ously Variable Transmission Fluid. Automatic Transmission (Six-Speed) — If Equipped We recommend you use SK Energy ATF SP-4 Transmis- sion Fluid.
Page 533: Maintenance Schedules
MAINTENANCE SCHEDULES CONTENTS ▫ Maintenance Chart.....534 MAINTENANCE SCHEDULE ... . .532...
Page 534 532 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE On Electronic Vehicle Information Center (EVIC) equipped vehicles, “Oil Change Required” will be dis- Your vehicle is equipped with an automatic oil change played in the EVIC and a single chime will sound, indicator system. The oil change indicator system will indicating that an oil change is necessary.
Page 535 MAINTENANCE SCHEDULES 533 Severe Duty All Models At Every Oil Change Interval As Indicated By Oil Change Indicator System: Change Engine Oil at 4000 miles (6,500 km) if the vehicle • Change oil and filter. is operated in a dusty and off road environment. This type of vehicle use is considered Severe Duty.
Page 536 534 MAINTENANCE SCHEDULES Maintenance Chart Refer to the Maintenance Schedules on the following pages for the required maintenance intervals. Mileage or time passed (whichever comes first) Or Years: 2 Or Kilometers: Additional Inspections Inspect the CV joints. Inspect front suspension, boot seals. tie rod ends, and replace if necessary.
Page 537 MAINTENANCE SCHEDULES 535 Mileage or time passed (whichever comes first) Or Years: 2 Or Kilometers: Additional Maintenance Replace engine air cleaner filter. Replace air conditioning/cabin air filter. Replace spark plugs** Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first.
Page 538 536 MAINTENANCE SCHEDULES Mileage or time passed (whichever comes first) Or Years: 2 Or Kilometers: Change the automatic transmission fluid and filter. (CVT only) Change the automatic transmission fluid and filter (six-speed only) if you frequently drive: on rough or unpaved roads, on mountain roads, on short trips, in heavy city traffic during hot weather, or if you use the vehicle for police, taxi, fleet, or frequent...
Page 539 MAINTENANCE SCHEDULES 537 Mileage or time passed (whichever comes first) Or Years: 2 Or Kilometers: Change the manual transmission fluid if using your vehicle for any of the following: trailer towing, heavy loading, taxi, police, delivery service (com- mercial service), off-road, desert operation or more than 50% of your driving is at sustained high speeds during hot weather, above 90°F (32°C).
Page 540 538 MAINTENANCE SCHEDULES WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.
Page 541: If You Need Consumer Assistance
IF YOU NEED CONSUMER ASSISTANCE CONTENTS ▫ Customer Assistance For The Hearing Or Speech SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE ..... . .541 Impaired (TDD/TTY).
Page 542 540 IF YOU NEED CONSUMER ASSISTANCE ▫ Traction Grades ..... . .547 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES ....547 ▫...
Page 543: Suggestions For Obtaining Service For Your Vehicle
IF YOU NEED CONSUMER ASSISTANCE 541 SUGGESTIONS FOR OBTAINING SERVICE FOR Be Reasonable With Requests YOUR VEHICLE If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with Prepare For The Appointment the service advisor and list the items in order of priority.
Page 544: Chrysler Group Llc Customer Center
542 IF YOU NEED CONSUMER ASSISTANCE • Authorized dealer name facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed • Vehicle Identification Number (VIN) correctly and in a timely manner. • Vehicle delivery date and mileage This is why you should always talk to an authorized Chrysler Group LLC Customer Center dealer service manager first.
Page 545: In Mexico Contact
IF YOU NEED CONSUMER ASSISTANCE 543 In Mexico Contact: Canadian residents with hearing difficulties that require assistance can use the special needs relay service offered Av. Prolongacion Paseo de la Reforma, 1240 by Bell Canada. For TTY teletypewriter users, dial 711 Sante Fe C.P.
Page 546: Warranty Information
544 IF YOU NEED CONSUMER ASSISTANCE The manufacturer will not stand behind any service WARNING! contract that is not the manufacturer’s service contract. It is not responsible for any service contract other than the Engine exhaust, some of its constituents, and certain manufacturer’s service contract.
Page 547: Mopar® Parts
IF YOU NEED CONSUMER ASSISTANCE 545 MOPAR® PARTS campaign. However, NHTSA cannot become involved in individual problems between you, your authorized MOPAR® fluids, lubricants, parts, and accessories are dealer, and the manufacturer. available from an authorized dealer. They are recom- mended for your vehicle in order to help keep the vehicle To contact NHTSA, you may either call the Auto Safety operating at its best.
Page 548: Publication Order Forms
546 IF YOU NEED CONSUMER ASSISTANCE PUBLICATION ORDER FORMS Diagnostic Procedure Manuals To order the following manuals, you may use either the Diagnostic Procedure Manuals are filled with diagrams, website or the phone numbers listed below. Visa, Mas- charts and detailed illustrations. These practical manuals tercard, American Express, and Discover orders are ac- make it easy for students and technicians to find and fix cepted.
Page 549: Department Of Transportation Uniform Tire Quality Grades
IF YOU NEED CONSUMER ASSISTANCE 547 Call toll free at: Treadwear • 1–800–890–4038 (U.S.) The Treadwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled • 1–800–387–1143 (Canada) conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded Visit us on the Worldwide Web at:...
Page 550: Temperature Grades
548 IF YOU NEED CONSUMER ASSISTANCE Vehicle Safety Standard No. 109. Grades B and A repre- WARNING! sent higher levels of performance on the laboratory test wheel, than the minimum required by law. The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not WARNING! include acceleration, cornering, hydroplaning, or...
Page 551 INDEX...
Page 552 550 INDEX ABS (Anti-Lock Brake System) ....366 Air Pressure, Tires......393 Adding Engine Coolant (Antifreeze) .
Page 553 INDEX 551 Fluid and Filter Changes ....507 Parking ......363 Fluid Level Check .
Page 554 552 INDEX Light ....... .205 Installing Child Restraints Using The Vehicle Seat Luggage Carrier .
Page 555 INDEX 553 Connector Cupholders ......204 UCI ....... . .297 Customer Assistance .
Page 556 554 INDEX Remote Keyless Entry (RKE) ....30 Emergency, In Case of Door Locks, Automatic ..... .32 Jacking .
Page 557 INDEX 555 Overheating ......441 Fluid Capacities ......527 Temperature Gauge .
Page 558 556 INDEX Capacity ......527 Gasoline (Fuel) ......414 Clean Air .
Page 559 INDEX 557 High Beam/Low Beam Select Switch ..169 Ignition Key Removal ..... . .12 Passing .
Page 560 558 INDEX Jump Starting ......466 Liftgate Window Wiper/Washer ....211 Light Bulbs.
Page 561 INDEX 559 Headlight Switch ..... . .166 Loading Vehicle ......421 High Beam .
Page 562 560 INDEX Manual Transaxle Modifications/Alterations, Vehicle ....8 Fluid Level Check ..... . .510 Monitor, Tire Pressure System .
Page 563 INDEX 561 Disposal ......487 Passing Light ......169 Filter .
Page 564 562 INDEX Pretensioners Reformulated Gasoline .....414 Seat Belts ......56 Refrigerant .
Page 565 INDEX 563 Roll Over Warning ......4 Extender ......61 Roof Type Carrier .
Page 566 564 INDEX Sentry Key Programming ....17 Automatic Transmission ....327 Sentry Key Replacement .
Page 567 INDEX 565 System, Remote Starting .....26 Jacking .......444 Life of Tires .
Page 568 566 INDEX 24-Hour Towing Assistance ....127 Transmission Disabled Vehicle ......474 Automatic .
Page 569 INDEX 567 Things You Should Know About Your Uconnect® Untwisting Procedure, Seat Belt ....53 Phone .......133 Uconnect®...
Page 570 568 INDEX Warranty Information ..... .544 Windows ....... .36 Washer Power .
Page 571 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into The antenna cable should be as short as practical this vehicle’s electronic system to provide immunity and routed away from the vehicle wiring when pos- to radio frequency signals. Mobile two-way radios sible.
Page 572 Chrysler Group LLC 14MK49-126-AE Fifth Edition Printed in U.S.A.

Jeep 2014 Compass Owner's Manual

Introduction

Things to Know before Starting Your Vehicle

Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Starting and Operating

Quick Links

Chapters

Related Manuals for Jeep 2014 Compass

Summary of Contents for Jeep 2014 Compass