Program Flow Chart - Hach Sigma 900 User Manual

Appendix B

Program Flow Chart

Press
NEW PROGRAM
key
NO
Set # of Samples
Note: Boxes with dark border denote ADVANCED PROGRAM feature.
Page 66
Quick Reference Guide
Ready to Start
Yes
Advanced Program? (YES to Enable, NO to Disable)
Enter number of sample bottles (1 or 24 with standard program, 1, 2, 4, 8, or 24 with Adv Prog.)
Enter units for bottle volume (ML or Gal)
Enter bottle volume (in specified units)
Enter units for tubing length (FT or CM)
Enter length of intake tubing (in whole FT or CM)
Program Lock (enable or disable)
Enter Cabinet Temperature
If previously entered parameters are desired for another (new) program, it is not
necessary to re-enter the parameters. Simply press the NEW PROGRAM key and start
here:
YES
Program Delay? Set Hour, Minute, AM/PM, Month/Day/Year
NO
Set Hour, Minute, AM/PM, Month/Day/Year
Program Restart?
NO
Set Hour, Minute, AM/PM, Month/Day/
Year
NO
Set Hour, Minute, AM/PM, Month/Day/
Year
Timed Mode?
YES
Set Next Interval
Between
Variable Interval
YES
Samples
Set Interval
NO
Between Samples
NO
Other Changes?
YES
Composite Mode?
YES
Continuous Mode?
NO
YES
Program Halted Program Complete
\
Parameter Entry Press
Alter Parameters?
NO
Program Stop?
Program Stop?
NO
Set Flow Interval
Between
Samples
YES
Timed Overide
Set-up Complete - Ready To Start
NO
Samples /
Bottles /
Bottle?
NO
Sample?
YES
Set # of
Set # of
Samples
Bottles
ADVANCED
PROGRAM
Review Parameters
Return to Standby
Flow Mode?
YES
Variable Interval
NO
YES
Set Next Flow
Interval
Between
NO
Samples
YES
Discrete Mode?
Timed Bottle?
NO
YES
Real Time?
YES NO
Set
Set Hour:Min:AM/PM
Interval
Bottles/Intvl = _____
Continuous Mode?
Change Volume?
YES NO
A B
Con't on next page
8837apdx_qrg.fm