Advertisement
Table of Contents
DREAM ON ME INC.
125 HELEN STREET
S.PLAINFIELD NJ 07080
732-748-1300
Adult assembly required
Small parts may present choking hazard prior to assembly.
Enclosed please find simple step-by-step instructions to help you
quickly assemble your products. Before you begin we recommend
that you following the steps below:
1. Plesae read the instructions thoroughly.
2. Identify all parts and hardware.
3. You will need the following tools:
Philips head screw drive
Flat head screw drive
Hammer
DO NOT use power drills or drivers
To protect your parts during assembly please place them on a soft
surface.
To clean surface use only water on a damp cloth. DO NOT use
window cleaners or cleaning abrasives as it will scratch the surface
and could damage the protective coating.
ASSEMBLY INSTRUCTIONS
ITEM NO: 645
1
MADE IN CHINA
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dream On Me 645
Summary of Contents for Dream On Me 645
- Page 1 DREAM ON ME INC. ASSEMBLY INSTRUCTIONS 125 HELEN STREET ITEM NO: 645 S.PLAINFIELD NJ 07080 732-748-1300 Adult assembly required Small parts may present choking hazard prior to assembly. Enclosed please find simple step-by-step instructions to help you quickly assemble your products. Before you begin we recommend that you following the steps below: 1.
- Page 2 WARNING Failure to follow these warnings and the assembly instructions could result in serious injury or death. Read all instructions before assembling cradle.KEEP INSTRUCTIONS FOR FUTURE USE. Periodically check the safety of your cradle, by making certain all scerws,nuts and bolts are tightened securely and insepect cradle for damaged hardware, loose joints,missing parts or sharp edges.
- Page 3 PARTS LIST FOR #645 Head board (2PCS) Rail (2PCS) Panel MDF (1PC) D:Mattress (1PC) HARDWARE AND TOOLS DIAGRAM Assembly bolt 5/8’ (8 pcs) Shelf brace screw 3/5’ (2 pcs) Allen key(1 pc) Cradle lock screw (2 pcs) Metal shelf brace(1 pc)
- Page 4 STEP 1 Connect rail (B) to one of the headboard ( A) by bolts (a) DO NOT FULLY TIGHTEN ALL THE BOLTS. STE P 2 Insent the bottom shelf (C) to the gap of the headboard(A) and rails (B).
- Page 5 STEP 3 Connect another headboard (A) to the rail (B) by bolts (a) . TIGHTEN ALL BOLTS. STEP 4 Connect the metal shelf brace (e) to the botto m bar of rails (B) with bolts (b).
- Page 6 STEP 6 Connect the cradle lock (f) to the headboard (A) with the bolts (d) and plastic washers (g). Then put in the mattress (D). STEP 7 Put down the cradle locks (f) to make the cradle stable. T ake it ,then it can swing. UNLOCK LOCK...
Need help?
Do you have a question about the 645 and is the answer not in the manual?
Questions and answers