Advertisement

Please note that the warning sticker is placed on the cribs to keep parents and
caregivers informed it is a requirement by law under CPSC And ASTM.
We do apologize for any inconvenience this may cause you.
Read all instructions before assembling crib.
Save instructions for future use.
Adult assembly required.
Small parts may present choking hazard prior to assembly.
Enclosed please find simple step-by-step instructions to help you
quickly assemble your products. Before you begin we recommend
that you following the steps below:
1. Please read the instructions thoroughly.
2. Identify all parts and hardware.
3. You will need the following tools:
Philips head screw driver
Flat head screw driver Hammer
Do Not Use Power Drills or Drivers
To protect your parts during assembly please place them on a soft
surface.
To clean surface use only water on a damp cloth. Do not use
window cleaners or cleaning abrasives as it will scratch the surface
and could damage the protective coating.
Lisez attentivement les instructions avant l'assemblage du lit.
Gardez le manuel pour future référence.
L'assemblage de ce meuble par un adulte est nécessaire.
Non-assemblées, les petites pièces présentent le risque d'étouffement.
Pour vous aider pendant l'assemblage de votre produit, veuillez trouver
en bas des instructions simples, en étapes. Avant de commencer l'as
semblage, les étapes suivantes sont vivement recommandées :
1. Lisez attentivement les instructions.
2. Identifiez toutes les pièces et la quincaillerie
3. Vous avez besoin des outils suivants :
Tournevis cruciforme
Tournevis plat
Dream On Me Inc.
1532 S WASHINGTON AVE
PISCATAWAY TWP NJ 08854
OFFICE: 732-752-7220
CUSTOMER SERVICE: 732-366-1788
ASSEMBLY INSTRUCTIONS
INSTRUCTIONS D'ASSEMBLAGE
NUMÉRO DU MODÈLE : 629
s
1
ITEM NO: 629
-

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 629 and is the answer not in the manual?

Questions and answers

Summary of Contents for Dream On Me 629

  • Page 1 PISCATAWAY TWP NJ 08854 ITEM NO: 629 OFFICE: 732-752-7220 NUMÉRO DU MODÈLE : 629 CUSTOMER SERVICE: 732-366-1788 Please note that the warning sticker is placed on the cribs to keep parents and caregivers informed it is a requirement by law under CPSC And ASTM.
  • Page 2 Marteau N'utilisez pas d'outils électriques. Pour protéger les pièces pendant l'assemblage, placez-les sur une sur face souple. Pour nettoyer la surface du meuble n'utilisez que de l'eau sur une lingette humide. N'utilisez pas des nettoyants à vitre ou des nettoyants abrasifs, car ils vont égratigner cette surface et endommager le fini.
  • Page 3 PARTS OR SHARP EDGES BEFORE AND AFTER ASSEMBLY.A FREQUENT CHECK SHOULD BE MADE DURING USE.DO NOT USE CRIB IF ANY PARTS ARE MISSING, DAMAGED OR BROKEN.CONTACT DREAM ON ME INC.1532 S WASHINGTON AVE PISCATAWAY TWP NJ 08854 FOR REPLACEMENT PARTS AND INSTRUCTIONAL LITERATURE IF NEEDED.DO NOT SUBSTITUTE PARTS.
  • Page 4 MANQUANTES, QU’AUCUN JOINT N’EST LÂCHE ET QU’AUCUN BORD N’EST TRANCHANT. NE PAS L’UTILISER SI DES PIÈCES MANQUENT OU SONT FAUTIVES. POUR DES PIÈCES DE REMPLACEMENT ET DES INSTRUCTIONS D’ASSEMBLAGE, CONTACTEZ DREAM ON ME INC, 1532 S WASHINGTON AVE PISCATAWAY TWP NJ 08854. NE PAS SUBSTITUER DE PIÈCES.
  • Page 5 CONNECTION HARD WARE QUINCAILLERIE DE CONNEXION d:3” Allen head bolt (4pcs) a: 1-3/5” Allen head b:Wood dowels (18pcs) c:Allen wrench (1pc) bolt (19 pcs) d: Vis à six pans 3" (4pcs) b: Goujons en bois (18pcs) c: Clé Allen (1pc) a: Vis à...
  • Page 6 Changer front bar I:Changing surface (1pc) K:Changer bottom shelf (1pc) Barre avant de la table à langer I : Surface à langer (1pc) K : Étagère inférieure de la table à langer (1pc) J:Changer middle panel J : Panneau central de la table à langer F: T op (1pc) F : Haut (1pc) G: Middle (1pc)
  • Page 7 CRIB ASSEMBLY (ASSEMBLAGE DU BERCEAU) STEP 1 Attach The changer back(B&C) , and The changer middle(D&E) , and The changer front (F,G,&H) toThe changer right side (A) using wood dowels (b) bolts (a) by allen wrench (c) . ÉTAPE 1 Attachez l'arrière de la table à...
  • Page 8 STEP 3 Attach The changer back (B&C) and ÉTAPE 3 The changer middle (B&C) and The changer front (F,G&H) to The changer left side (L) using wood dowels (b),bolts (a) by allen wrench (c) . Attachez l'arrière de la table à langer (B et C), le centre de la table à...
  • Page 9 STEP 5 ÉTAPE 5 Attach The top rail (P) and the bottom rail (Q) to The changer side (L) and left headboard using wood dowels(b),bolts(a&g) and barrel nuts(e) by allen wrench. Attachez le rail supérieur (P) et le rail inférieur (Q) au côté de la table à...
  • Page 10 STEP 7 Attach The top rail (P) and bottom front ÉTAPE 7 rail (S) to The changer side (L) and the left head board using wood dowels (b),bolts (a&g),barrel nuts (e) and allen wrench (c) . Attachez le rail supérieur (P) et le rail inférieur avant (S) au côté...
  • Page 11 STEP 9 Slide the bottom panel (X) painted side up , into grooves of the left side panel (U) and the right side panel (V) . In the end , insert the bottom (X) into the groove of back panel (W) . ÉTAPE 9 Faites glisser le panneau inférieur (X), le côté...
  • Page 12 STEP 11 Insert the shelf supports (j) in the holes in the posts of changing table. Then place the changer middle shelf (Y) inside the shelf support. Tighten the screws in the shelf supports (j) . ÉTAPE 11 Insérez les supports d'étagères (j) à travers les trous dans les poteaux de la table à...
  • Page 13 STEP 12 1.Slide the drawers into rails on head board (A&L) . 2.Assembly the belt (m) to the changer side (A&L) using washer(k) and bolt(l).Note:please assemble the longer belt to the far side from the crib. 3.Add the pad (Z) . 4.Put the child on the pad,then insert safty restraint s ystem of the tape across child's waist.
  • Page 14 Converting crib to a day bed You have the option to convert crib to a day bed 1:Remove the front rail bottom(S) and the top rail (P), 2:Install the mattress support (R) in its lowest position. 3:Assembly the top rail (P) to left head board and changer side (L) using allen head bolt (a) and wood dowel (b) as shown .
  • Page 15 Converting crib to a twin bed II TRANSFORMER LA TABLE À LANGER EN LIT JUMEAU II (Hollywood bed frame sold separately) PIÈCES REQUISES POUR COMPLÉTER L'ÉTAPE POTEAU POUR LA POTEAU POUR LA POTEAU POUR PLATEFORME PIED PLATEFORME PIED BALUSTRADE X 1 GAUCHE x 1 DROIT x 1 PAS INCLUS...
  • Page 16 FURNITURE TIPPING DETERRENT HARDWARE DISPOSITIF ANTIBASCULEMENT HOW TO LOCKED Tipping furniture may injury young children . Use of this tipping restraint hardware is highly recommended . This hardware , when peoperly installed , could provide protection against the unexpected tipping of furniture due to improper use . WARNING This hardware is only a deterrent .
  • Page 17 6. Assurez-vous que la sangle est bien fixée et verrouillée aux supports de montage. LIMITED WARRANTY Dream on Me warrants its product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers 30 days from the date of original purchase.

Table of Contents

Save PDF