Table of Contents
Advertisement
Dream On Me Inc.
1532 S WASHINGTON AVE
PISCATAWAY TWP NJ 08854
OFFICE: 732-752-7220
CUSTOMER SERVICE: 732-366-1788
Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE.
Adult assembly required.
Small parts may present choking hazard prior to assembly.
Enclosed please find simple step-by-step instructions to help you
quickly assemble your products. Before you begin we recommend
that you following the steps below:
1. Please read the instructions thoroughly.
2. Identify all parts and hardware.
3. You will need the following tools:
Philips head screw driver
Flat head screw driver
Hammer
Do Not Use Power Drills or Drivers
To protect your parts during assembly please place them on a soft
surface.
To clean surface use only water on a damp cloth. Do not use
window cleaners or cleaning abrasives as it will scratch the surface
and could damage the protective coating.
Please note that the warning sticker is placed on the cribs to keep parents and
caregivers informed it is a requirement by law under CPSC And ASTM.
We do apologize for any inconvenience this may cause you.
ASSEMBLY INSTRUCTIONS
s
1
ITEM NO: 628
Advertisement
Table of Contents
Related Manuals for Dream On Me 628
Summary of Contents for Dream On Me 628
- Page 1 Dream On Me Inc. ASSEMBLY INSTRUCTIONS 1532 S WASHINGTON AVE PISCATAWAY TWP NJ 08854 OFFICE: 732-752-7220 ITEM NO: 628 CUSTOMER SERVICE: 732-366-1788 Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FOR FUTURE USE. Adult assembly required. Small parts may present choking hazard prior to assembly.
- Page 3 · READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP INSTRUCTIONS FOR FUTURE USE. USE ONLY MATTRESS/PAD PROVIDED BY DREAM ON ME WHICH MUST BE AT LEAST 37-3/4 IN.LONG BY 23-3/4 WIDE AND NOT MORE THAN 2 IN.THICK. · CHECK THIS PRODUCT FOR DAMAGED HARDWARE, LOOSE JOINTS, MISSING PARTS OR SHARP EDGES BEFORE AND AFTER ASSEMBLY.A FREQUENT CHECK...
- Page 4 1532 S WASHINGTON AVE PISCATAWAY TWP NJ 08854,NE...
- Page 5 CONNECTION HARDWARE c. 3/4” Allen head Bolt 4 pcs a. 3” Allen head Bolt 16 pcs b. Barrel Nuts 16 pcs f. Wood Dowel 4 pcs e.1-3/5” Allen head Bolt 4 pcs d. Allen Wrench 1 pcs g. Metal connection 4 PCS h.1”...
- Page 6 STEP 1 Attach the left side pannel (H) to the left front leg (C) and the left back leg (E) by using allen head bolts (a) and barrel nuts (b) . Then attach the right side pannel (I) to the right front leg (D) and the right back leg(F) by using allen bolts(a) and barrel nuts(b).
- Page 7 STEP 3 Attach metal connection(g) to the wooden mattress base(J) by using bolts(h) and nuts(i) with wrench. Position the wooden mattress base (J) to a selected position on legs. Insert the bolts(c) into thread inserts on legs,then tighten securely with Allen wrench(d). Be sure the flat side of wooden mattress base(J) is upward.
- Page 8 CONVERT THE CRIB INTO DAY BED Remove the top rail (A) and the front rail (B). Connect the top rail(A) to the bottom of the left front leg and right front leg (as the below show) by using wood dowel(f) and allen head bolt(e) and barrel nut (b),then locate the mattress base to the lowest position.
- Page 9 Converting crib to a twin bed II (Hollywood bed frame sold separately) You have the option to convert crib to a twin bed II. 1:Use the back rail as the headboard of twin bed II. 2:Connect the left foot platform and the right foot platform to the rail which are not included and sold separately.
- Page 10 LIMITED WARRANTY Dream on Me warrants its product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers 30 days from the date of original purchase. This warranty is valid only upon presentation of proof of purchase.
Need help?
Do you have a question about the 628 and is the answer not in the manual?
Questions and answers
Crib set- dream on me 628. I am looking for the exact hardware to construct the crib. I have the wood pieces but just missing the hard work. Please let me know if I can order with you guys directly or where to find. Thanks.